Powermatic Associates Logo

CA4KN223BW3 Schneider Electric Industrial Automation Components

CA4KN223BW3 on Powermatic Associates
Schneider Electric

Part#:CA4KN223BW3

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric CA4KN223BW3 is a contactor with a mechanical durability of 30,000,000 operations at no load. It is designed for plate DIN rail mounting and falls under the utilisation categories AC-15 and DC-13. This model features two SPST-NO (Single Pole Single Throw - Normally Open) contacts and is equipped with spring-type terminals. It has an operating rate of 6,000 cycles per hour.

Product Details

  • Operating Time
    10...20 ms coil de-energisation and NO opening 15...25 ms coil de-energisation and NC closing 30...40 ms coil energisation and NO closing 25...35 ms coil energisation and NC opening
  • [Ui] Rated Insulation Voltage
    690 V IEC 60947 750 V VDE 0110 group C 690 V BS 5424 600 V CSA C22.2 No 14
  • Utilisation Category
    AC-15 DC-13
  • Control Circuit Voltage Limits
    Drop-out 0.1...0.75 Uc 122 °F (50 °C)) Operational 0.7...1.3 Uc 122 °F (50 °C))
  • Mounting Support
    Plate Rail
  • Connections - Terminals
    spring terminals 1 0.00…0.00 in² (0.75…1.5 mm²)solid spring terminals 1 0.00…0.00 in² (0.75…1.5 mm²)flexible without cable end
  • Associated Fuse Rating
    10 A gG IEC 60947 10 A gG VDE 0660
  • Depth
    2.24 in (57 mm)
  • Net Weight
    0.52 lb(US) (0.235 kg)
  • Width
    1.77 in (45 mm)
  • Height
    2.28 in (58 mm)
  • Insulation Resistance
    > 10 MOhm
  • Non Overlap Distance
    0.02 in (0.5 mm)
  • Minimum Switching Current
    5 mA
  • Minimum Switching Voltage
    17 V
  • Heat Dissipation
    1.8 W
  • Mechanical Durability
    30 Mcycles
  • Hold-In Power Consumption In W
    1.8 W 68 °F (20 °C)
  • Inrush Power In W
    1.8 W 68 °F (20 °C))
  • Immunity To Microbreaks
    2 ms
  • Maximum Operating Rate
    6000 cyc/h
  • [Ith] Conventional Free Air Thermal Current
    10 A 122 °F (50 °C)
  • Irms Rated Making Capacity
    110 A IEC 60947
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • [Uc] Control Circuit Voltage
    24 V DC
  • Device Short Name
    CA4K
  • Control Circuit Type
    DC low consumption
  • Range
    TeSys
  • Product Or Component Type
    Control relay
  • Pole Contact Composition
    2 NO + 2 NC
  • [Ue] Rated Operational Voltage
    <= 690 V <= 400 Hz
  • Contactor Application
    Control circuit
  • Product Name
    TeSys CAK

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of CA4KN223BW3 on Powermatic Associates is $85.98. Order now.

CA4KN223BW3 Related Documents

Instruction Sheet-1631039700268.pdfProduct Datasheet-1631039700272.pdfCatalog-1631039700266.pdf

Similar products from: Schneider Electric Industrial Automation Components

MG17444 on Powermatic Associates

MG17444

Schneider Electric

Schneider Electric MG17444 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. This 2-pole MCB is rated for a current of 5A and has an operating voltage (Ue) of 480V. It features a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 480Y/277Vac, and 10kA AIR at 125Vdc. Both poles are protected, and it utilizes a C tripping curve.

2 in stock
LC1D506G7 on Powermatic Associates

LC1D506G7

Schneider Electric

Schneider Electric LC1D506G7 is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 80A (AC-1) and 50A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and offers a degree of protection of IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 15kW at 220-230Vac to 33kW at 660-690Vac, all in AC-3 category. The rated power (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of this contactor is rated at 15 million operations at no load, and it supports a phase-to-phase rated voltage (AC) of 690 V.

1 in stock
LC1DT20BL on Powermatic Associates

LC1DT20BL

Schneider Electric

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

2 in stock
LC1D95G7 on Powermatic Associates

LC1D95G7

Schneider Electric

Schneider Electric LC1D95G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at up to 440Vac, reaching 55kW at 500Vac, and maintaining 45kW at 660-690Vac and 1000Vac, all in AC-3 category. The rated power (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D95G7 is rated at 4,000,000 operations, with an electrical durability (with load) of 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

11 in stock
AZ5DE015 on Powermatic Associates

AZ5DE015

Schneider Electric

Schneider Electric - AZ5DE015

93 in stock
3100800401 on Powermatic Associates

3100800401

Schneider Electric

Flange Mounted Handle Gasket

1 in stock

Manufacturer warranty

CA4KN223BW3 Schneider Electric

$85.98

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$85.98

$85.98 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare CA4KN223BW3 with other Industrial Automation Components products

Operating Time

[Ui] Rated Insulation Vol...

Utilisation Category

Control Circuit Voltage L...

Mounting Support

Connections - Terminals

Associated Fuse Rating

Depth

Net Weight

Width

Selected product

CA4KN223BW3
Backordered
CA4KN223BW3
Schneider Electric

Schneider Electric CA4KN223BW3 is a contactor with a mechanical durability of 30,000,000 operations ...

Operating Time10...20 ms coil de-energisat...

[Ui] Rated Insulation Voltage690 V IEC 60947 750 V VDE 0...

Utilisation CategoryAC-15 DC-13

Control Circuit Voltage LimitsDrop-out 0.1...0.75 Uc 122 °...

Mounting SupportPlate Rail

Connections - Terminalsspring terminals 1 0.00…0.00...

Associated Fuse Rating10 A gG IEC 60947 10 A gG VD...

Depth2.24 in (57 mm)

Net Weight0.52 lb(US) (0.235 kg)

Width1.77 in (45 mm)

LC1DT20BL
2 in stock
LC1DT20BL
Schneider Electric

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-co...

Operating Time-

[Ui] Rated Insulation Voltage-

Utilisation CategoryAC-1

Control Circuit Voltage Limits-

Mounting Support-

Connections - Terminals-

Associated Fuse Rating-

Depth-

Net Weight-

Width-

LC1DT206BL
3 in stock
LC1DT206BL
Schneider Electric

Schneider Electric LC1DT206BL is a magnetic contactor from the Deca sub-range, designed with a low-c...

Operating Time-

[Ui] Rated Insulation Voltage-

Utilisation CategoryAC-1

Control Circuit Voltage Limits-

Mounting Support-

Connections - Terminals-

Associated Fuse Rating-

Depth-

Net Weight-

Width-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

FAQ

What is the price of CA4KN223BW3?
Purchase the CA4KN223BW3 from Powermatic Associates at the price of $85.98. Order today.

Out if stock but available for backorder.

Schneider Electric CA4KN223BW3 is a contactor with a mechanical durability of 30,000,000 operations at no load. It is designed for plate DIN rail mounting and falls under the utilisation categories AC-15 and DC-13. This model features two SPST-NO (Single Pole Single Throw - Normally Open) contacts and is equipped with spring-type terminals. It has an operating rate of 6,000 cycles per hour.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock