Powermatic Associates Logo

CA4KN22BW3 Schneider Electric Industrial Automation Components

CA4KN22BW3 on Powermatic Associates
Schneider Electric

Part#:CA4KN22BW3

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric CA4KN22BW3 is a contactor with a mechanical durability of 30,000,000 operations at no load. It is designed for plate DIN rail mounting and falls under the utilisation categories AC-15 and DC-13. This model features two SPST-NO (Single Pole Single Throw - Normally Open) contacts and is equipped with screw clamp terminals. It has an operating rate of 6,000 cycles per hour.

Product Details

  • [Ui] Rated Insulation Voltage
    690 V IEC 60947 750 V VDE 0110 group C 690 V BS 5424 600 V CSA C22.2 No 14
  • Operating Time
    10...20 ms coil de-energisation and NO opening 15...25 ms coil de-energisation and NC closing 30...40 ms coil energisation and NO closing 25...35 ms coil energisation and NC opening
  • Connections - Terminals
    screw clamp terminals 1 0.00…0.01 in² (1.5…4 mm²)solid screw clamp terminals 2 0.00…0.01 in² (1.5…4 mm²)solid screw clamp terminals 1 0.00…0.01 in² (0.75…4 mm²)flexible with cable end screw clamp terminals 2 0.00…0.01 in² (0.75…4 mm²)fle
  • Control Circuit Voltage Limits
    Drop-out 0.1...0.75 Uc 122 °F (50 °C)) Operational 0.7...1.3 Uc 122 °F (50 °C))
  • Utilisation Category
    DC-13 AC-15
  • Tightening Torque
    11.51 lbf.in (1.3 N.m) screw clamp terminals flat Ø 6 mm 11.51 lbf.in (1.3 N.m) screw clamp terminals Philips No 2 0.24 in (6 mm)
  • Associated Fuse Rating
    10 A gG IEC 60947 10 A gG VDE 0660
  • Mounting Support
    Rail Plate
  • Minimum Switching Voltage
    17 V
  • Net Weight
    0.52 lb(US) (0.235 kg)
  • Depth
    2.24 in (57 mm)
  • Insulation Resistance
    > 10 MOhm
  • Width
    1.77 in (45 mm)
  • Height
    2.28 in (58 mm)
  • Non Overlap Distance
    0.02 in (0.5 mm)
  • Minimum Switching Current
    5 mA
  • Heat Dissipation
    1.8 W
  • Inrush Power In W
    1.8 W 68 °F (20 °C))
  • Hold-In Power Consumption In W
    1.8 W 68 °F (20 °C)
  • Immunity To Microbreaks
    2 ms
  • Mechanical Durability
    30 Mcycles
  • Maximum Operating Rate
    6000 cyc/h
  • Irms Rated Making Capacity
    110 A IEC 60947
  • [Ith] Conventional Free Air Thermal Current
    10 A 122 °F (50 °C)
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • Contactor Application
    Control circuit
  • Pole Contact Composition
    2 NO + 2 NC
  • Control Circuit Type
    DC low consumption
  • [Ue] Rated Operational Voltage
    <= 690 V <= 400 Hz
  • [Uc] Control Circuit Voltage
    24 V DC
  • Device Short Name
    CA4K
  • Product Or Component Type
    Control relay
  • Product Name
    TeSys CAK
  • Range
    TeSys

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of CA4KN22BW3 on Powermatic Associates is $85.98. Order now.

CA4KN22BW3 Related Documents

Product Datasheet-1631039366920.pdfInstruction Sheet-1631039366912.pdf

Similar products from: Schneider Electric Industrial Automation Components

MG17444 on Powermatic Associates

MG17444

Schneider Electric

Schneider Electric MG17444 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. This 2-pole MCB is rated for a current of 5A and has an operating voltage (Ue) of 480V. It features a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 480Y/277Vac, and 10kA AIR at 125Vdc. Both poles are protected, and it utilizes a C tripping curve.

2 in stock
LC1D506G7 on Powermatic Associates

LC1D506G7

Schneider Electric

Schneider Electric LC1D506G7 is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 80A (AC-1) and 50A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and offers a degree of protection of IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 15kW at 220-230Vac to 33kW at 660-690Vac, all in AC-3 category. The rated power (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of this contactor is rated at 15 million operations at no load, and it supports a phase-to-phase rated voltage (AC) of 690 V.

1 in stock
LC1DT20BL on Powermatic Associates

LC1DT20BL

Schneider Electric

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

2 in stock
LC1D95G7 on Powermatic Associates

LC1D95G7

Schneider Electric

Schneider Electric LC1D95G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at up to 440Vac, reaching 55kW at 500Vac, and maintaining 45kW at 660-690Vac and 1000Vac, all in AC-3 category. The rated power (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D95G7 is rated at 4,000,000 operations, with an electrical durability (with load) of 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

11 in stock
AZ5DE015 on Powermatic Associates

AZ5DE015

Schneider Electric

Schneider Electric - AZ5DE015

93 in stock
ZB2BE102 on Powermatic Associates

ZB2BE102

Schneider Electric

Schneider Electric ZB2BE102 is a contacts block designed for use in various automation applications. It features 1 NC (Normally Closed) auxiliary contact and is capable of enduring up to 1,000,000 operations at no load, highlighting its mechanical durability. The part is equipped with short-circuit protection, which is ensured by a 10A gG cartridge fuse. Its operating mode is spring-return (impulse/momentary), facilitating quick and responsive actions in automated systems.

46 in stock

Manufacturer warranty

CA4KN22BW3 Schneider Electric

$85.98

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$85.98

$85.98 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare CA4KN22BW3 with other Industrial Automation Components products

[Ui] Rated Insulation Vol...

Operating Time

Connections - Terminals

Control Circuit Voltage L...

Utilisation Category

Tightening Torque

Associated Fuse Rating

Mounting Support

Minimum Switching Voltage

Net Weight

Selected product

CA4KN22BW3
Backordered
CA4KN22BW3
Schneider Electric

Schneider Electric CA4KN22BW3 is a contactor with a mechanical durability of 30,000,000 operations a...

[Ui] Rated Insulation Voltage690 V IEC 60947 750 V VDE 0...

Operating Time10...20 ms coil de-energisat...

Connections - Terminalsscrew clamp terminals 1 0.00...

Control Circuit Voltage LimitsDrop-out 0.1...0.75 Uc 122 °...

Utilisation CategoryDC-13 AC-15

Tightening Torque11.51 lbf.in (1.3 N.m) screw...

Associated Fuse Rating10 A gG IEC 60947 10 A gG VD...

Mounting SupportRail Plate

Minimum Switching Voltage17 V

Net Weight0.52 lb(US) (0.235 kg)

CA3SK11BD
6 in stock
CA3SK11BD
Schneider Electric

Schneider Electric CA3SK11BD is a control relay with a mechanical durability of 10,000,000 operation...

[Ui] Rated Insulation Voltage-

Operating Time-

Connections - Terminals-

Control Circuit Voltage Limits-

Utilisation CategoryDC-13 AC-15

Tightening Torque-

Associated Fuse Rating-

Mounting Support-

Minimum Switching Voltage-

Net Weight-

CA2SK11G7
6 in stock
CA2SK11G7
Schneider Electric

Schneider Electric CA2SK11G7 is a control relay with a mechanical durability of 10,000,000 operation...

[Ui] Rated Insulation Voltage-

Operating Time-

Connections - Terminals-

Control Circuit Voltage Limits-

Utilisation CategoryDC-13 AC-15

Tightening Torque-

Associated Fuse Rating-

Mounting Support-

Minimum Switching Voltage-

Net Weight-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

FAQ

What is the price of CA4KN22BW3?
Purchase the CA4KN22BW3 from Powermatic Associates at the price of $85.98. Order today.

Out if stock but available for backorder.

Schneider Electric CA4KN22BW3 is a contactor with a mechanical durability of 30,000,000 operations at no load. It is designed for plate DIN rail mounting and falls under the utilisation categories AC-15 and DC-13. This model features two SPST-NO (Single Pole Single Throw - Normally Open) contacts and is equipped with screw clamp terminals. It has an operating rate of 6,000 cycles per hour.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock