Powermatic Associates Logo

150440 Festo Proximity Sensors

150440 on Powermatic Associates
Festo

Part#:150440

Manufacturer:Festo

Alt. Part#:SIEN-M30NB-NS-K-L

Product Lifecycle:Active

Get a quick Quote!

proximity sensor SIEN-M30NB-NS-K-L Inductive, with standard switching distance. Conforms to standard: EN 60947-5-2, Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): to EU directive for EMC, Materials note: (*

About the manufacturer: Festo is one of the manufacturers that offers Proximity Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 150440 Festo price in the box on the right side or send a quick quote.

Product Details

  • Cable length
    2.5 m
  • Tightening torque
    40 Nm
  • Product weight
    150 g
  • Electrical output
    NPN
  • Rated operating distance
    15 mm
  • Switching output
    NPN
  • Voltage drop
    ≤ 2 V
  • Idle current
    ≤ 10 mA
  • Type code
    SIEN
  • Certification
    RCM compliance mark c UL us - Listed (OL)
  • Assured operating distance
    12.15 mm
  • Switching element function
    N/O contact
  • DC operating voltage range
    10 V ... 30 V
  • Reverse polarity protection
    for all electrical connections
  • Mounting type
    Not flush
  • Switching status indication
    LED yellow
  • Degree of protection
    IP67
  • Note on materials
    Free of copper and PTFE RoHS-compliant
  • Max. switching frequency
    700 Hz
  • Residual ripple
    +/- 20 %
  • Conforms to standard
    EN 60947-5-2
  • CE marking (see declaration of conformity)
    As per EU EMC directive
  • Repetition accuracy
    0.75 mm
  • Hysteresis
    ≤ 1.65 mm
  • Short-circuit protection
    Pulsed
  • Material of cable sheath
    TPE-U(PUR)
  • Size
    M30x1.5
  • Contamination level
    3
  • Symbol
    00991704
  • Reduction factors
    Aluminum = 0.5 Steel St 37 = 1.0
  • Ambient temperature
    -25 °C ... 70 °C
  • Max. output current
    200 mA
  • Electrical connection
    3-wire Cable
  • Type of mounting
    With lock nut
  • Housing material
    Brass Chrome-plated
  • Surge resistance
    0.8 kV
  • Selection of sensor version
    Standard
  • Ambient temperature with flexible cable installation
    -5 °C ... 70 °C
  • Selection of additional sensor information
    With standard switching distance

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents 150440 Specs

150440 150440 DataSheet.pdf

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17