S18UUAQ Banner Ultrasonic Sensors

Product Details

• Weight
  70.760352 g
• Country Of Origin
  CN
• 1-wire Serial Interface
  No
• Wireless
  No
• SSI
  No
• RS-422
  No
• Application: Ultrasonic
  Yes
• Feature: Clear Object Detection
  Yes
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Remote Teach and Laser Control Input Impedence
  12 kΩ
• Temp. Warm-up Drift (Notes 1)
  After 30 min, the apparent switchpoint is < 0.5% of the actual position.
• Temp. Warm-up Drift (Notes 2)
  After 60 min, the apparent switchpoint is < 0.3% of the actual position.
• Profibus
  No
• RS-485
  No
• Common Ethernet Protocol
  No
• RS-232
  No
• PROFINET
  No
• IO Link
  No
• Feature: Chemical Resistant
  No
• Feature: Remote Teach
  Yes
Feature: Timing (Hold/Delay)
No
Barrel Diameter (mm)
18
Analog Linearity (mm)
+/- 0.5
Power/Current Consumption (exclusive of load)
65 mA max; 40 mA @ 25 V dc
Ultrasonic Frequency (kHz)
300
Minimum Window Size (mm)
5
Minimum Response Time (ms)
2.5
Rep Rate (ms)
2.5
Warm-up Time (minutes)
10
Temperature Warm-up Drift upon Power-up
Temp. compensation enabled, < 1.0% of the sensing distance upon power-up.
Max Op. Relative Humidity Non-Condensing (%)
100
Min Operating Temperature (°C)
-20
Storage Temperature (°C)
-40 to 80
Max Operating Temperature (°C)
60
IP Rating
IP67
NEMA Rating
NEMA 6P
Output Protection
Protected against short circuit conditions
Analog Voltage Output Rating
2.5 kΩ min. load impedance
Discrete (Switched) Outputs
Bipolar (NPN & PNP)
Vibration
MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Number of Pins
5
Temperature Effect (mm/°C)
0.02% of sensing distance/°C
Adjustments
Push Button; Remote Teach
Delay at Power-up (ms)
300
Power Supply
12-30 V dc
Minimum Sensing Distance (mm)
30
Analog Resolution/Discrete Repeatability
1 at 2.5 ms response speed, 0.5 at 30 ms response speed
Quick Disconnect Type
M12 (Euro)
Max Sensing Distance (mm)
300
Analog Output Configuration
0-10 V dc
Connection
Integral QD
Input/Output
Analog
Primary Housing Material
ABS/Polycarbonate
Indicator
LED(s)
Sensing Mode (General)
Proximity
Power
DC
PC Configurable
No
Device Type
Sensor
Sensing Mode (Detailed)
Time of Flight
Housing Style
Barrel - Straight
Max Measurement Range
>100 mm - <=500 mm
Sensing Beam
Ultrasonic

S18UUAQ Related Documents