S18UBAQ-10582 Banner Ultrasonic Sensors

Banner Engineering S18RW3R is a photo-electric sensor designed for through-beam system applications, part of the S18 AC series. This sensor functions as a receiver alone, housed in a thermoplastic body with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 20Vac-250Vac, with nominal values at 200Vac, 220Vac, and 240Vac. It is designed to work within an ambient air temperature range of -40 to +70°C. The S18RW3R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of up to 20m. It operates with infrared light at a wavelength of 950 nm and has a response time of 16ms (0.016 s). The operating mode is Dark-ON, making it suitable for applications where detection is required in the absence of the light beam.

Banner

S18UIARQ

$387.00

Banner Engineering S18UIARQ is an ultrasonic distance sensor/transmitter belonging to the S18U right-angle series. It features a time-of-flight system with TEACH mode for precise distance measurement. The sensor is housed in a thermoplastic material and comes pre-equipped with a 5-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Designed for operation in ambient air temperatures ranging from -20 to +60°C, it offers a degree of protection rated at IP67 NEMA 6P, making it suitable for challenging environments. The S18UIARQ has an M18 cylindrical threaded/barrel shape, with a sensing distance between 30 and 300mm and operates at a 300kHz transmission frequency. It includes protection functions against short-circuit and features 1 x analog output (4-20mA) for signal transmission. The thread size for mounting is M18.

Banner

SMB46U

$34.00

Banner Engineering SMB46U is a mounting accessory designed as a right-angle mounting bracket. It is crafted from 14-gauge stainless steel 316, ensuring durability and resistance to corrosion. The bracket features a U-shape, making it suitable for various installation requirements.

Banner

MQAC-430

$58.00

Banner Engineering MQAC-430 is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 4-pin 1/2"-20 micro female connector and bare end flying leads. The cable has a diameter of 5.7mm and is encased in black sheathing made from PVC, ensuring durability and protection against environmental factors. The chrome-plated brass coupling nut enhances the cable's robustness. With an ambient air temperature operation range of -40 to +105°C, it is suitable for a wide range of environments. The MQAC-430 offers a degree of protection rated at IP67, making it resistant to dust and water ingress. It has a length of 30ft (9m) and is rated for a voltage of 250Vac, accommodating various industrial applications.

Banner

S18SP6FF100Q

$141.00

Verified stock: 16

Banner Engineering S18SP6FF100Q is a fixed-field photo-electric sensor from the S18 DC series, designed with a background suppression system. This sensor features a thermoplastic housing with an acrylic lens and is pre-equipped with a 4-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc, and can function within an ambient air temperature range of -40 to +70°C. The S18SP6FF100Q offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (PNP transistor; complementary NO/NC) and has a sensing distance of 100mm. It utilizes infrared light with a wavelength of 880 nm and boasts a quick response time of 3ms (0.003 s). The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

Banner

QS18UPA

$160.00

Verified stock: 14

Banner Engineering QS18UPA is an ultrasonic distance sensor belonging to the QS18U series. It features an M18 threaded mount and operates within an ambient air temperature range of -20 to +60°C. This sensor is designed with a time-of-flight system and TEACH mode for precise distance measurement. It comes pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads for easy installation. The QS18UPA offers a degree of protection rated at IP67 NEMA 6P, ensuring durability in various environmental conditions. It requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and operates at a 300kHz transmission frequency. The sensor's housing is made from ABS material, providing a robust structure. It has a sensing distance range of 50 to 500mm and includes 1 x digital output (PNP transistor) for connectivity. Additionally, it is equipped with protection functions against short-circuit incidents.

Banner

S18SN6LPQ

$119.00

Banner Engineering S18SN6LPQ is a polarized photo-electric sensor from the S18 DC series, designed in a retro-reflective mode. This sensor features a thermoplastic housing with an acrylic lens and is pre-equipped with a 4-pin Euro-style M12 connector. It operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc and 24Vdc, and can function within an ambient air temperature range of -40 to +70°C. The S18SN6LPQ offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (NPN transistor; complementary NO/NC) and has a sensing distance of 2m. It emits visible red light with a wavelength of 680 nm and features a quick response time of 3ms. Additionally, it supports both Light-ON and Dark-ON operating modes.

Banner

S183E

$55.00

Banner Engineering S183E is a photo-electric sensor from the S18 AC series, designed as an emitter in a through-beam system or opposed mode configuration. This sensor features a thermoplastic housing with a polycarbonate lens and is pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads. It operates on a supply voltage ranging from 20Vac to 250Vac, with nominal voltages of 200Vac, 220Vac, and 240Vac. The S183E can function within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation, and it has a sensing distance of 20m. The sensor utilizes infrared light with a wavelength of 950 nm for detection, and it has an M18 thread size for mounting.

Banner

S18RW3R

$79.00

Banner Engineering S18RW3R is a photo-electric sensor designed for through-beam system applications, part of the S18 AC series. This sensor functions as a receiver alone, housed in a thermoplastic body with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 20Vac-250Vac, with nominal values at 200Vac, 220Vac, and 240Vac. It is designed to work within an ambient air temperature range of -40 to +70°C. The S18RW3R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of up to 20m. It operates with infrared light at a wavelength of 950 nm and has a response time of 16ms (0.016 s). The operating mode is Dark-ON, making it suitable for applications where detection is required in the absence of the light beam.

Banner

S18UIARQ

$387.00

Banner Engineering S18UIARQ is an ultrasonic distance sensor/transmitter belonging to the S18U right-angle series. It features a time-of-flight system with TEACH mode for precise distance measurement. The sensor is housed in a thermoplastic material and comes pre-equipped with a 5-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Designed for operation in ambient air temperatures ranging from -20 to +60°C, it offers a degree of protection rated at IP67 NEMA 6P, making it suitable for challenging environments. The S18UIARQ has an M18 cylindrical threaded/barrel shape, with a sensing distance between 30 and 300mm and operates at a 300kHz transmission frequency. It includes protection functions against short-circuit and features 1 x analog output (4-20mA) for signal transmission. The thread size for mounting is M18.

Banner

SMB46U

$34.00

Banner Engineering SMB46U is a mounting accessory designed as a right-angle mounting bracket. It is crafted from 14-gauge stainless steel 316, ensuring durability and resistance to corrosion. The bracket features a U-shape, making it suitable for various installation requirements.

Banner

MQAC-430

$58.00

Banner Engineering MQAC-430 is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 4-pin 1/2"-20 micro female connector and bare end flying leads. The cable has a diameter of 5.7mm and is encased in black sheathing made from PVC, ensuring durability and protection against environmental factors. The chrome-plated brass coupling nut enhances the cable's robustness. With an ambient air temperature operation range of -40 to +105°C, it is suitable for a wide range of environments. The MQAC-430 offers a degree of protection rated at IP67, making it resistant to dust and water ingress. It has a length of 30ft (9m) and is rated for a voltage of 250Vac, accommodating various industrial applications.

Banner

S18SP6FF100Q

$141.00

Verified stock: 16

Banner Engineering S18SP6FF100Q is a fixed-field photo-electric sensor from the S18 DC series, designed with a background suppression system. This sensor features a thermoplastic housing with an acrylic lens and is pre-equipped with a 4-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc, and can function within an ambient air temperature range of -40 to +70°C. The S18SP6FF100Q offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (PNP transistor; complementary NO/NC) and has a sensing distance of 100mm. It utilizes infrared light with a wavelength of 880 nm and boasts a quick response time of 3ms (0.003 s). The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

Banner

QS18UPA

$160.00

Verified stock: 14

Banner Engineering QS18UPA is an ultrasonic distance sensor belonging to the QS18U series. It features an M18 threaded mount and operates within an ambient air temperature range of -20 to +60°C. This sensor is designed with a time-of-flight system and TEACH mode for precise distance measurement. It comes pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads for easy installation. The QS18UPA offers a degree of protection rated at IP67 NEMA 6P, ensuring durability in various environmental conditions. It requires a supply voltage of 12Vdc to 30Vdc, with 24Vdc nominal, and operates at a 300kHz transmission frequency. The sensor's housing is made from ABS material, providing a robust structure. It has a sensing distance range of 50 to 500mm and includes 1 x digital output (PNP transistor) for connectivity. Additionally, it is equipped with protection functions against short-circuit incidents.

Banner

S18SN6LPQ

$119.00

Banner Engineering S18SN6LPQ is a polarized photo-electric sensor from the S18 DC series, designed in a retro-reflective mode. This sensor features a thermoplastic housing with an acrylic lens and is pre-equipped with a 4-pin Euro-style M12 connector. It operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc and 24Vdc, and can function within an ambient air temperature range of -40 to +70°C. The S18SN6LPQ offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (NPN transistor; complementary NO/NC) and has a sensing distance of 2m. It emits visible red light with a wavelength of 680 nm and features a quick response time of 3ms. Additionally, it supports both Light-ON and Dark-ON operating modes.

Banner

S183E

$55.00

Banner Engineering S183E is a photo-electric sensor from the S18 AC series, designed as an emitter in a through-beam system or opposed mode configuration. This sensor features a thermoplastic housing with a polycarbonate lens and is pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads. It operates on a supply voltage ranging from 20Vac to 250Vac, with nominal voltages of 200Vac, 220Vac, and 240Vac. The S183E can function within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation, and it has a sensing distance of 20m. The sensor utilizes infrared light with a wavelength of 950 nm for detection, and it has an M18 thread size for mounting.

Banner

S18RW3R

$79.00

Banner Engineering S18RW3R is a photo-electric sensor designed for through-beam system applications, part of the S18 AC series. This sensor functions as a receiver alone, housed in a thermoplastic body with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 20Vac-250Vac, with nominal values at 200Vac, 220Vac, and 240Vac. It is designed to work within an ambient air temperature range of -40 to +70°C. The S18RW3R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. Its M18 cylindrical threaded/barrel shape facilitates easy installation. The sensor provides one digital output (Solid-state AC output; SPST contact type) and has a sensing distance of up to 20m. It operates with infrared light at a wavelength of 950 nm and has a response time of 16ms (0.016 s). The operating mode is Dark-ON, making it suitable for applications where detection is required in the absence of the light beam.

Banner

S18UIARQ

$387.00

Banner Engineering S18UIARQ is an ultrasonic distance sensor/transmitter belonging to the S18U right-angle series. It features a time-of-flight system with TEACH mode for precise distance measurement. The sensor is housed in a thermoplastic material and comes pre-equipped with a 5-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. Designed for operation in ambient air temperatures ranging from -20 to +60°C, it offers a degree of protection rated at IP67 NEMA 6P, making it suitable for challenging environments. The S18UIARQ has an M18 cylindrical threaded/barrel shape, with a sensing distance between 30 and 300mm and operates at a 300kHz transmission frequency. It includes protection functions against short-circuit and features 1 x analog output (4-20mA) for signal transmission. The thread size for mounting is M18.

Banner

SMB46U

$34.00

Banner Engineering SMB46U is a mounting accessory designed as a right-angle mounting bracket. It is crafted from 14-gauge stainless steel 316, ensuring durability and resistance to corrosion. The bracket features a U-shape, making it suitable for various installation requirements.

Banner

MQAC-430

$58.00