Powermatic Associates Logo

M9U21106 Schneider Electric Industrial Automation Components

M9U21106 on Powermatic Associates
Schneider Electric

Part#:M9U21106

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric M9U21106 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, compliant with UL1077 standards. It falls under the C60H-DC sub-range and features a single pole configuration. This MCB is rated for a current of 6A and a voltage of up to 500Vdc. It has a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U21106 is equipped with one protected pole and utilizes a C tripping curve.

Product Details

  • Breaking Capacity
    10 kA Icu 220 V DC EN/IEC 60947-2 6 kA Icu 250 V DC EN/IEC 60947-2 20 kA Icu 110 V DC EN/IEC 60947-2 5 kA AIR 12...250 V DC UL 1077 10 kA Icu 220 V DC GB 14048.2 6 kA Icu 250 V DC GB 14048.2 20 kA Icu 110 V DC GB 14048.2
  • [Ics] Rated Service Breaking Capacity
    7.5 kA 75 % EN/IEC 60947-2 - 220 V DC 4.5 kA 75 % EN/IEC 60947-2 - 250 V DC 15 kA 75 % EN/IEC 60947-2 - 110 V DC 7.5 kA 75 % GB 14048.2 - 220 V DC 4.5 kA 75 % GB 14048.2 - 250 V DC 15 kA 75 % GB 14048.2 - 110 V DC
  • Product Certifications
    IEC CCC UR
  • Connections - Terminals
    Tunnel type terminal top or bottom) 0.00…0.04 in² (1…25 mm²) AWG 18...AWG 4) - rigid stranded Tunnel type terminal top or bottom) 0.00…0.02 in² (1…16 mm²) AWG 18...AWG 6) - flexible Tunnel type terminal top or bottom) 0.00…0.02 in² (1…16 mm²) AW
  • Standards
    EN/IEC 60947-2 GB 14048.2 UL 1077
  • [Ue] Rated Operational Voltage
    250 V DC 110 V DC 220 V DC
  • Electrical Durability
    3000 cycles 250 V DC L/R = 2 ms 6000 cycles 250 V DC
  • Earth-Leakage Protection
    Without
  • Tightening Torque
    22.13 lbf.in (2.5 N.m) top or bottom
  • Wire Stripping Length
    0.55 in (14 mm) top or bottom
  • Net Weight
    0.28 lb(US) (0.128 kg)
  • Depth
    2.87 in (73 mm)
  • Provision For Padlocking
    Padlockable
  • Mechanical Durability
    20000 cycles
  • Color
    Gray
  • Local Signalling
    ON/OFF indication
  • Width
    0.71 in (18 mm)
  • [Ui] Rated Insulation Voltage
    500 V DC EN/IEC 60947-2
  • Mounting Support
    DIN rail
  • Mounting Mode
    Clip-on
  • Utilisation Category
    Category A EN/IEC 60947-2
  • [Uimp] Rated Impulse Withstand Voltage
    6 kVEN/IEC 60947-2
  • Suitability For Isolation
    Yes EN/IEC 60947-2
  • Trip Unit Technology
    Thermal-magnetic
  • Network Type
    DC
  • Device Application
    Distribution
  • Line Rated Current
    6 A 77 °F (25 °C) EN/IEC 60947-2
  • Range
    Multi 9
  • 9 Mm Pitches
    2
  • Height
    3.19 in (81 mm)
  • Contact Position Indicator
    Yes
  • Control Type
    Toggle
  • Magnetic Tripping Limit
    7...10 x In DC
  • Curve Code
    C
  • Device Short Name
    C60H-DC
  • Product Or Component Type
    Miniature circuit-breaker
  • Number Of Protected Poles
    1
  • Poles Description
    1P
  • Product Name
    Multi 9 C60H-DC

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of M9U21106 on Powermatic Associates is $182.00. Order now.

Similar products from: Schneider Electric Industrial Automation Components

MG17444 on Powermatic Associates

MG17444

Schneider Electric

Schneider Electric MG17444 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. This 2-pole MCB is rated for a current of 5A and has an operating voltage (Ue) of 480V. It features a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 480Y/277Vac, and 10kA AIR at 125Vdc. Both poles are protected, and it utilizes a C tripping curve.

2 in stock
LC1D506G7 on Powermatic Associates

LC1D506G7

Schneider Electric

Schneider Electric LC1D506G7 is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 80A (AC-1) and 50A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and offers a degree of protection of IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power (kW) spans from 15kW at 220-230Vac to 33kW at 660-690Vac, all in AC-3 category. The rated power (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of this contactor is rated at 15 million operations at no load, and it supports a phase-to-phase rated voltage (AC) of 690 V.

1 in stock
LC1DT20BL on Powermatic Associates

LC1DT20BL

Schneider Electric

Schneider Electric LC1DT20BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that uses less than 2.4W. It features screw connections for secure installation and operates with 4 poles (4NO) capable of handling a rated current of 20A under AC-1 conditions. This contactor is designed for DIN rail mounting, ensuring a compact and efficient setup with a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage range of 19.2-30Vdc, nominally at 24Vdc, which is 0.8 to 1.25 times the control voltage (Uc). The LC1DT20BL can handle a rated operating voltage (Ue) up to 690 V and is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, both rated for instantaneous operation. The contacts are designed to withstand a rated impulse voltage (Uimp) of 6 kV. With mechanical durability rated at 15 million operations at no load, this contactor is built for longevity. It supports a phase-to-phase rated voltage (AC) of 690 V and maintains a power consumption of 2.4 W.

2 in stock
LC1D95G7 on Powermatic Associates

LC1D95G7

Schneider Electric

Schneider Electric LC1D95G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at up to 440Vac, reaching 55kW at 500Vac, and maintaining 45kW at 660-690Vac and 1000Vac, all in AC-3 category. The rated power (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D95G7 is rated at 4,000,000 operations, with an electrical durability (with load) of 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

11 in stock
AZ5DE015 on Powermatic Associates

AZ5DE015

Schneider Electric

Schneider Electric - AZ5DE015

93 in stock
ZB2BE102 on Powermatic Associates

ZB2BE102

Schneider Electric

Schneider Electric ZB2BE102 is a contacts block designed for use in various automation applications. It features 1 NC (Normally Closed) auxiliary contact and is capable of enduring up to 1,000,000 operations at no load, highlighting its mechanical durability. The part is equipped with short-circuit protection, which is ensured by a 10A gG cartridge fuse. Its operating mode is spring-return (impulse/momentary), facilitating quick and responsive actions in automated systems.

46 in stock

Manufacturer warranty

M9U21106 Schneider Electric

$182.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$182.00

$182.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare M9U21106 with other Industrial Automation Components products

Breaking Capacity

[Ics] Rated Service Break...

Product Certifications

Connections - Terminals

Standards

[Ue] Rated Operational Vo...

Electrical Durability

Earth-Leakage Protection

Tightening Torque

Wire Stripping Length

Selected product

M9U21106
Backordered
M9U21106
Schneider Electric

Schneider Electric M9U21106 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Breaking Capacity10 kA Icu 220 V DC EN/IEC 60...

[Ics] Rated Service Breaking Capacity7.5 kA 75 % EN/IEC 60947-2 -...

Product CertificationsIEC CCC UR

Connections - TerminalsTunnel type terminal top or ...

StandardsEN/IEC 60947-2 GB 14048.2 UL...

[Ue] Rated Operational Voltage250 V DC 110 V DC 220 V DC

Electrical Durability3000 cycles 250 V DC L/R = 2...

Earth-Leakage ProtectionWithout

Tightening Torque22.13 lbf.in (2.5 N.m) top o...

Wire Stripping Length0.55 in (14 mm) top or botto...

M9U21110
227 in stock
M9U21110
Schneider Electric

Schneider Electric M9U21110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Breaking Capacity-

[Ics] Rated Service Breaking Capacity-

Product Certifications-

Connections - Terminals-

Standards-

[Ue] Rated Operational Voltage-

Electrical Durability-

Earth-Leakage Protection-

Tightening Torque-

Wire Stripping Length-

M9F42170
2 in stock
M9F42170
Schneider Electric

Schneider Electric M9F42170 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designe...

Breaking Capacity-

[Ics] Rated Service Breaking Capacity-

Product Certifications-

Connections - Terminals-

Standards-

[Ue] Rated Operational Voltage-

Electrical Durability-

Earth-Leakage Protection-

Tightening Torque-

Wire Stripping Length-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

FAQ

What is the price of M9U21106?
Purchase the M9U21106 from Powermatic Associates at the price of $182.00. Order today.

Out if stock but available for backorder.

Schneider Electric M9U21106 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads, compliant with UL1077 standards. It falls under the C60H-DC sub-range and features a single pole configuration. This MCB is rated for a current of 6A and a voltage of up to 500Vdc. It has a short circuit breaking rating of 5kA AIR at 250Vdc. The M9U21106 is equipped with one protected pole and utilizes a C tripping curve.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock