Powermatic Associates Logo

BDF46025 Schneider Electric Electronic Components

BDF46025 on Powermatic Associates
Schneider Electric

Part#:BDF46025

Manufacturer:Schneider Electric

Category:Electronic Components

Product Lifecycle:Active

Product description

Square D by Schneider Electric BDF46025 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDF sub-range, featuring a PowerPact B-Frame 100 TMD 4P-4t design with a rated current of 25A and a rated voltage of 600Vac 600Y/347Vac. It has a rated impulse voltage (Uimp) of 8 kV and offers a connection via Term. nut kit for fixed busbar connection on both line and load sides. This MCCB has an IP40 degree of protection and is capable of 15,000 mechanical operations at no load. It is designed for fixed mounting on DIN rail or as an individual unit mount on a plate, with 4 poles (4P). The dimensions are 137 mm in height, 80 mm in depth, and 108 mm in width. It falls under utilisation category A and features over-current protection fixed at 25A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated insulation voltage (Ui) is 800 V, with a rated operating voltage (Ue) of 525 V, and it provides thermal and magnetic protection functions. The trip current rating is 25 AT, and it has an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, with a toggle (manual) operating mode. The short circuit breaking rating varies with voltage, up to 25kA at 240Vac and down to 10kA at 250Vdc, according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

Product Details

  • Breaking Capacity
    25 kA 208Y/120 V AC 50/60 Hz UL 489 18 kA 240 V AC 50/60 Hz UL 489 Icu 25 kA 480/277 V AC 50/60 Hz UL 489 Icu 14 kA 480 V AC 50/60 Hz UL 489 18 kA 600Y/347 V AC 50/60 Hz UL 489 14 kA 250 V DC UL 489 25 kA Icu 18 kA
  • [Ics] Rated Service Breaking Capacity
    25 kA 220...240 V AC 50/60 Hz IEC 60947-2 14 kA 500...525 V AC 50/60 Hz IEC 60947-2 18 kA 380...415 V AC 50/60 Hz IEC 60947-2 18 kA 440 V AC 50/60 Hz IEC 60947-2
  • Number Of Slots
    1 auxiliary switch OF plug-in) 1 voltage release MN or MX plug-in) 1 alarm switch SD plug-in)
  • AWG Gauge
    AWG 14...AWG 8 aluminium/copper AWG 6...AWG 3/0 aluminium/copper
  • Mounting Mode
    Clip-on 35 mm symmetrical DIN rail) By screws plate)
  • Tightening Torque
    44.25 lbf.in (5 N.m) 0.00…0.02 in² (2.5…16 mm²) (AWG 14...AWG 4) 79.66 lbf.in (9 N.m) 0.04…0.15 in² (25…95 mm²) (AWG 3...AWG 3/0)
  • Width
    4.25 in (108 mm)
  • Power Wire Stripping Length
    0.79 in (20 mm)
  • Electrical Connection
    Terminal nut ON and OFF end
  • Local Signalling
    for presence of auxiliary contacts flag (green)
  • Utilisation Category
    Category A
  • Trip Unit Name
    TM-D
  • Trip Unit Technology
    Thermal-magnetic
  • [Ue] Rated Operational Voltage
    525 V AC 50/60 Hz UL 489
  • Quantity Per Set
    Set of 1
  • Net Weight
    2.74 lb(US) (1.241 kg)
  • Depth
    3.15 in (80 mm)
  • Height
    5.39 in (137 mm)
  • 9 Mm Pitches
    12
  • Color
    Gray RAL 7016)
  • Connection Pitch
    1.06 in (27 mm)
  • Electrical Durability
    10000 cycles IEC 947-1 Annex K ed 5.2 440 V In
  • Mechanical Durability
    15000 cycles IEC 947-1 Annex K ed 5.2
  • Suitability For Isolation
    Yes conforming to IEC 60947-2
  • [Ui] Rated Insulation Voltage
    800 V IEC 60947-2
  • Breaking Capacity Code
    D
  • [Uimp] Rated Impulse Withstand Voltage
    8 kV IEC 60947-2
  • Continuous Current Rating
    80 %
  • Control Type
    Toggle
  • Protected Poles Description
    4t
  • Product Name
    PowerPact B
  • Device Application
    Distribution
  • Line Rated Current
    25 A
  • Number Of Poles
    4P
  • Product Or Component Type
    Circuit breaker
  • Device Short Name
    BD 025
  • Range
    PowerPact

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

BDF46025 Related Documents

Instruction Sheet-1631034029277.pdfCatalog-1631034029288.pdfProduct Datasheet-1631034029280.pdf

Similar products from: Schneider Electric Electronic Components

HDF36035 on Powermatic Associates

HDF36035

Schneider Electric

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 35A and offers thermal protection for overload and magnetic protection for short-circuit scenarios. This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It is designed for individual unit mount on plate with a Term. nut kit for fixed busbar connection on both line and load sides. The HDF36035 has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm, featuring an IP40 degree of protection. Its operating mode is manual toggle, with over-current protection settings fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 35 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

1 in stock
LC1F225L7 on Powermatic Associates

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

1 in stock
LJB606 on Powermatic Associates

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

2 in stock
LJB64 on Powermatic Associates

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

3 in stock
QOB330GFI5237 on Powermatic Associates

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock
H361 on Powermatic Associates

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

1 in stock

Manufacturer warranty

BDF46025 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare BDF46025 with other Electronic Components products

Breaking Capacity

[Ics] Rated Service Break...

Number Of Slots

AWG Gauge

Mounting Mode

Tightening Torque

Width

Power Wire Stripping Leng...

Electrical Connection

Local Signalling

Selected product

BDF46025
Backordered
BDF46025
Schneider Electric

Square D by Schneider Electric BDF46025 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity25 kA 208Y/120 V AC 50/60 Hz...

[Ics] Rated Service Breaking Capacity25 kA 220...240 V AC 50/60 H...

Number Of Slots1 auxiliary switch OF plug-i...

AWG GaugeAWG 14...AWG 8 aluminium/cop...

Mounting ModeClip-on 35 mm symmetrical DI...

Tightening Torque44.25 lbf.in (5 N.m) 0.00…0....

Width4.25 in (108 mm)

Power Wire Stripping Length0.79 in (20 mm)

Electrical ConnectionTerminal nut ON and OFF end

Local Signallingfor presence of auxiliary co...

BJF36035
7 in stock
BJF36035
Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity100 kA 208Y/120 V AC 50/60 H...

[Ics] Rated Service Breaking Capacity-

Number Of Slots-

AWG Gauge-

Mounting Mode-

Tightening Torque-

Width-

Power Wire Stripping Length-

Electrical Connection-

Local Signalling-

M9U31110
1 in stock
M9U31110
Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Breaking Capacity10 kA Icu 220 V DC EN/IEC 60...

[Ics] Rated Service Breaking Capacity-

Number Of Slots-

AWG Gauge-

Mounting Mode-

Tightening Torque-

Width-

Power Wire Stripping Length-

Electrical Connection-

Local Signalling-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

BDF46020 on Powermatic Associates

BDF46020

Verified stock: 0

Square D by Schneider Electric BDF46020 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDF sub-range. It features a PowerPact B-Frame 100 TMD with 4 poles (4P) and a terminal nut kit for fixed busbar connection on both line and load sides. This MCCB has a rated current of 20A, with a rated voltage for AC at 600Vac 600Y/347Vac and for DC at 250Vdc. The rated impulse voltage (Uimp) is 8 kV, and it offers a degree of protection of IP40. Its mechanical durability is rated at 15,000 operations with no load, and it can be mounted either on a DIN rail or as an individual unit on a plate. The protection settings include over-current fixed at 20A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The MCCB has a net height of 137 mm, a net depth of 80 mm, and a net width of 108 mm. It operates with a toggle (manual) mode and has a frame current rating of 100 AF. The trip unit type is thermal-magnetic (fixed) with no display, and it provides thermal protection for overload and magnetic protection for short-circuits. The trip current rating is 20 AT, and its electrical durability with load is 10,000 operations at 440Vac. The short circuit breaking rating varies by voltage, with 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac under UL489 standards.

Schneider Electric

BDF46015 on Powermatic Associates

BDF46015

Verified stock: 0

Square D by Schneider Electric BDF46015 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDF sub-range, featuring a PowerPact B-Frame 100 TMD 4P-4t design. It has a rated current of 15A and operates at a rated voltage of 600Vac 600Y/347Vac, with a rated impulse voltage (Uimp) of 8 kV. The connection type is a terminal nut kit for fixed busbar connection on both line and load sides, offering a degree of protection of IP40. This MCCB has a mechanical durability of 15,000 operations and can be mounted either on a DIN rail or as an individual unit on a plate. It comes with 4 poles (4P) and has dimensions of 137 mm in height, 80 mm in depth, and 108 mm in width. The utilisation category is A, and it features protection settings including over-current fixed at 15A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated insulation voltage (Ui) is 800 V, with a rated operating voltage (Ue) of 525 V. It provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 15 AT. The electrical durability with load is 10,000 operations at 440Vac; In, and it has a frame current rating of 100 AF. The operating mode is toggle (manual), and it has a short circuit breaking rating of 25kA at 240Vac, 18kA at 480Vac, 18kA at 480Y/277Vac, and 14kA at 600Y/347Vac under UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display.

Schneider Electric

BDF46070 on Powermatic Associates

BDF46070

Verified stock: 0

Square D by Schneider Electric BDF46070 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDF sub-range, featuring a PowerPact B-Frame 100 TMD 4P-4t design. It has a rated current of 70A and operates at a rated voltage of 600Vac 600Y/347Vac, with a rated impulse voltage (Uimp) of 8 kV. This MCCB offers a connection via a Term. nut kit for fixed busbar connection on both line and load sides and provides a degree of protection of IP40. It is designed for mounting either fixed on a DIN rail or as an individual unit mount on a plate, featuring 4 poles (4P). The MCCB has a net height of 137 mm, a net depth of 80 mm, and a net width of 108 mm. It falls under utilisation category A and offers protection settings including over-current fixed at 70A, short-circuit hold current fixed at 640A, and short-circuit trip current fixed at 960A. The rated insulation voltage (Ui) is 800 V, with a rated operating voltage (Ue) of 525 V, and it provides thermal and magnetic protection functions. The trip current rating is 70 AT, and it has a frame current rating of 100 AF. The operating mode is toggle (manual), and it has a short circuit breaking rating of 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Y/347Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display.

Schneider Electric

BDF46110 on Powermatic Associates

BDF46110

Verified stock: 0

Square D by Schneider Electric BDF46110 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDF sub-range, featuring a PowerPact B-Frame 125 TMD with 4 poles (4P) and a terminal nut kit for fixed busbar connection on both line and load sides. It has a rated current of 110A, with a rated voltage for AC at 600Vac 600Y/347Vac and for DC at 250Vdc. The rated impulse voltage (Uimp) is 8 kV, and it offers a degree of protection of IP40. This MCCB has a mechanical durability of 15,000 operations and can be mounted either on a DIN rail or as an individual unit on a plate. Its protection settings include over-current fixed at 110A, short-circuit hold current fixed at 1000A, and short-circuit trip current fixed at 1500A. The net dimensions are 137 mm in height, 80 mm in depth, and 108 mm in width. It operates with a toggle (manual) mode, has a frame current rating of 125 AF, and its electrical durability with load is rated at 10,000 operations at 440Vac. The trip unit type is thermal-magnetic (fixed) without a display, and it provides thermal protection for overload and magnetic protection for short-circuits, with a trip current rating of 110 AT. The short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, and 14kA at 600Y/347Vac under UL489 standards.

Schneider Electric

BDF46050 on Powermatic Associates

BDF46050

Verified stock: 0

Square D by Schneider Electric BDF46050 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDF sub-range, featuring a PowerPact B-Frame 100 TMD 4P-4t design. It has a rated current of 50A and operates at a rated voltage of 600Vac 600Y/347Vac, with a rated impulse voltage (Uimp) of 8 kV. This breaker is equipped with a terminal nut kit for fixed busbar connection on both line and load sides, offering a degree of protection of IP40. It is designed for mounting either fixed on a DIN rail or as an individual unit mount on a plate, with a 4-pole (4P) configuration. The net dimensions are 137 mm in height, 80 mm in depth, and 108 mm in width. It falls under utilisation category A and features protection settings including over-current fixed at 50A, short-circuit hold current fixed at 480A, and short-circuit trip current fixed at 720A. The rated insulation voltage (Ui) is 800 V, with a rated operating voltage (Ue) of 525 V, and it provides thermal and magnetic protection functions. The trip current rating is 50 AT, and it has a frame current rating of 100 AF. The operating mode is manual toggle, and it has a short circuit breaking rating that varies with voltage, up to 25kA at 240Vac according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display.

Schneider Electric

FAQ

Out if stock but available for backorder.

Square D by Schneider Electric BDF46025 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT BDF sub-range, featuring a PowerPact B-Frame 100 TMD 4P-4t design with a rated current of 25A and a rated voltage of 600Vac 600Y/347Vac. It has a rated impulse voltage (Uimp) of 8 kV and offers a connection via Term. nut kit for fixed busbar connection on both line and load sides. This MCCB has an IP40 degree of protection and is capable of 15,000 mechanical operations at no load. It is designed for fixed mounting on DIN rail or as an individual unit mount on a plate, with 4 poles (4P). The dimensions are 137 mm in height, 80 mm in depth, and 108 mm in width. It falls under utilisation category A and features over-current protection fixed at 25A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 600A. The rated insulation voltage (Ui) is 800 V, with a rated operating voltage (Ue) of 525 V, and it provides thermal and magnetic protection functions. The trip current rating is 25 AT, and it has an electrical durability of 10,000 operations with load at 440Vac. The frame current rating is 100 AF, with a toggle (manual) operating mode. The short circuit breaking rating varies with voltage, up to 25kA at 240Vac and down to 10kA at 250Vdc, according to UL489 standards. The trip unit type is thermal-magnetic (fixed) without a display.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock