Powermatic Associates Logo

FX-501 Panasonic Industrial Automation Components

FX-501 on Powermatic Associates
Panasonic

Part#:FX-501

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Panasonic FX-501 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501 offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It has one digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times from 25µs (0.000025 s) in H-SP mode to 24ms (0.024 s) in HYPR mode. The device includes a 4-digit red LED display and a 3-digit green LED display for clear, easy-to-read output and settings information. Power consumption is 0.96 W in normal mode and 0.68 W in Eco mode.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Panasonic Industrial Automation Components

DP-102-M on Powermatic Associates

DP-102-M

Panasonic

Panasonic DP-102-M is a dual display digital high pressure sensor designed for air and non-corrosive gases, featuring a main function as a sensor with pressure detection capabilities. It offers 1 x analog output (1-5Vdc / 4-20mA) and 2 x digital outputs (NPN open-collector / 24Vdc / 100mA) with comparative outputs 1 & 2, including an orange LED as a visual position indicator. The degree of protection provided is IP40, ensuring a basic level of protection against solid objects. It includes protection functions such as outputs short-circuit protection. The sensor supports various comparative output operations (NO / NC selectable by key) and modes (EASY mode / Hysteresis mode / Window comparator mode), with a comparative output response time ranging from 2.5ms to 1000ms selectable. Connection is facilitated through an M5 threaded port plus a 2m cable with connector. Measurement accuracy is highlighted by comparative output repeatability of (+/-0.2% F.S.). The display features a 4-digit LED display alongside a 4-digit red / orange / green LED display for clear and precise readings.

43 in stock
EX-13A on Powermatic Associates

EX-13A

Panasonic

Panasonic EX-13A is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The EX-13A features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". This sensor is equipped with output short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with front sensing and built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

8 in stock
EX-13EA on Powermatic Associates

EX-13EA

Panasonic

Panasonic EX-13EA is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor is characterized by an IP67 degree of protection, ensuring its operation in various environmental conditions. It emits red light with a wavelength of 680 nm and can detect opaque objects as small as 2mm / 0.079". The EX-13EA features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". For protection, it includes outputs short-circuit protection. This ultra-slim photo-electric sensor emitter+receiver pair is designed for side sensing with built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

44 in stock
HD-T1C on Powermatic Associates

HD-T1C

Panasonic

Panasonic HD-T1C is a control unit designed specifically for wafer alignment control. It features a housing made from heat-resistant ABS material and measures 0.3m or 30cm in length. This unit is pre-wired with a 0.3m or 30cm 3-core heat-resistant PVC cable that terminates with a connector for easy integration. It offers 1 x analog output (1-5Vdc) for transmitting alignment data. The HD-T1C operates with a current consumption of 70mA or 0.07 A and boasts a rapid response time of 500µs or 0.0005 s. Its measurement accuracy is precise at 30µm, ensuring accurate wafer alignment in automation processes.

2 in stock
EX-13EB-C5 on Powermatic Associates

EX-13EB-C5

Panasonic

Panasonic EX-13EB-C5 is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The visual position indicator features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. With a response time of 0.5ms / 0.0005 s and a single digital output (NPN open-collector / 24Vdc / 50mA), it operates in Dark-ON mode. The sensing distance is set at 0.5m / 50cm / 500mm / 19.685in. It includes protection functions such as outputs short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with side sensing and built-in amplification. The connection is facilitated by a pre-wired 5m 3-core (2-core on emitter side) 0.1mm2 cabtyre cable terminated with bare end flying leads.

10 in stock
AFPX-EFP0 on Powermatic Associates

AFPX-EFP0

Panasonic

Panasonic AFPX-EFP0 is a connector specifically designed for expansion FP0 adapter applications within the expansion units sub-range. It facilitates the connection of up to 3 slave devices. This part is engineered for DIN rail mounting, offering a streamlined installation process for various automation environments.

2 in stock

Manufacturer warranty

FX-501 Panasonic

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Panasonic

Powermatic Associates is an authorized Panasonic distributor, proudly offering a diverse range of innovative industrial products tailored to meet your evolving needs. Panasonic, renowned for its engineering excellence and cutting-edge technology, delivers a comprehensive portfolio encompassing automation, energy solutions, and electronic components designed to enhance operational efficiency, relia...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock
LMHCA571C on Powermatic Associates

LMHCA571C

Novanta IMS

Novanta IMS LMHCA571C is a stepper motor that falls under the high-torque stepper motors sub-range. It features an integrated driver and a high-torque DC stepper motor with an incremental magnetic encoder, utilizing a single motor stack and closed-loop hMTechnology for precise control. This motor offers a variety of connection types, including a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting CANopen communication protocol. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The LMHCA571C is designed for mounting with a 57x57mm flange and is rated with a degree of protection of IP65, making it suitable for environments where dust and water resistance is necessary. It has a moment of inertia of 0.14kg.cm^2 and can deliver a stall torque of 107N.cm. The resolution of this stepper motor is defined by a 1.8° step angle.

0 in stock

Relevant products

FX-501P on Powermatic Associates

FX-501P

Verified stock: 140

Panasonic FX-501P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501P offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. The device has one digital output (PNP open-collector / 24Vdc / 100mA) and offers response times varying from 25µs to 24ms depending on the mode. It features a 4-digit red LED display and a 3-digit green LED display for clear indication, with a power consumption of 0.96 W in normal mode and 0.68 W in Eco mode.

Panasonic

FX-551-C2 on Powermatic Associates

FX-551-C2

Verified stock: 0

Panasonic FX-551-C2 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED and a 2m cable. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.1ms to 32s, and a one-shot timer. The case cover is made of polycarbonate, and the switch is constructed from polyacetal. This part is pre-wired with a 2m length 0.2mm2 3-core cabtyre cable terminated with bare end flying leads. It offers outputs short-circuit protection, operates at a wavelength of 660 nm, and can function within an ambient air temperature range of -10 to +55 °C. The FX-551-C2 has an IP40 degree of protection, supports both Light-ON and Dark-ON operating modes, and has a current consumption of 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in eco mode, both at 24Vdc. It features 1 x digital output (NPN open-collector / 24Vdc / 100mA), with response times varying from 60µs to 24ms depending on the setting. The display includes a 4-digit red LED and a 4-digit green LED. Power consumption is 0.96 W in normal mode and 0.68 W in eco mode.

Panasonic

FX-551 on Powermatic Associates

FX-551

Verified stock: 0

Panasonic FX-551 is an amplifier for sensors, specifically designed as a digital fiber sensor amplifier featuring a red LED. It is constructed with a polycarbonate case cover and polyacetal switches, ensuring durability. This part is pre-equipped with a connector for easy installation and offers a wavelength of 660 nm. It operates efficiently within an ambient air temperature range of -10 to +55 °C and is protected by an IP40 degree of protection, safeguarding against solid objects larger than 1mm. The FX-551 supports both Light-ON and Dark-ON operating modes and has a low current consumption of 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It features a single digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times ranging from 60µs (0.000060 s) to 24ms (0.024 s), catering to different operational needs. Additionally, it includes an interference prevention function, an OFF-delay/ON-delay timer, and a one-shot timer with a time delay range of 0.1ms to 32s (0.0001-32 s). The power consumption is modest at 0.96 W in normal mode and 0.68 W in Eco mode. The device is equipped with a 4-digit red LED display and a 4-digit green LED display for clear, easy-to-read output information.

Panasonic

FAQ

Out if stock but available for backorder.

Panasonic FX-501 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501 offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It has one digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times from 25µs (0.000025 s) in H-SP mode to 24ms (0.024 s) in HYPR mode. The device includes a 4-digit red LED display and a 3-digit green LED display for clear, easy-to-read output and settings information. Power consumption is 0.96 W in normal mode and 0.68 W in Eco mode.

Similar products from: Industrial Automation Components

This item can ship within 24h!

XB5AW34B5 on Powermatic Associates

XB5AW34B5

Verified stock: 2

Schneider Electric XB5AW34B5 is an illuminated flush push-button designed for automation control systems. This component, part of the XB5 sub-range, features a plastic body and bezel with a round shape and a plain lens type. It offers a degree of protection rated at IP66, making it suitable for use in environments where dust and water resistance are necessary. The push-button operates with a spring-return mechanism, providing momentary (impulse) activation. It includes 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts for integration into various circuit designs. The XB5AW34B5 is equipped with an integral LED for illumination, with the light color being red. It operates on a supply voltage of 24 V, accommodating both AC and DC sources, and is compatible with network frequencies of 50/60 Hz. The diameter of the push-button is 22 mm, and it utilizes screw-clamp terminals for secure wire connections.

Schneider Electric

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock