Name: FX-501P
Brand: Panasonic

FX-551

Panasonic FX-551 is an amplifier for sensors, specifically designed as a digital fiber sensor amplifier featuring a red LED. It is constructed with a polycarbonate case cover and polyacetal switches, ensuring durability. This part is pre-equipped with a connector for easy installation and offers a wavelength of 660 nm. It operates efficiently within an ambient air temperature range of -10 to +55 °C and is protected by an IP40 degree of protection, safeguarding against solid objects larger than 1mm. The FX-551 supports both Light-ON and Dark-ON operating modes and has a low current consumption of 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It features a single digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times ranging from 60µs (0.000060 s) to 24ms (0.024 s), catering to different operational needs. Additionally, it includes an interference prevention function, an OFF-delay/ON-delay timer, and a one-shot timer with a time delay range of 0.1ms to 32s (0.0001-32 s). The power consumption is modest at 0.96 W in normal mode and 0.68 W in Eco mode. The device is equipped with a 4-digit red LED display and a 4-digit green LED display for clear, easy-to-read output information.

Panasonic

FX-551L3-P-C2

Verified stock: 0

Panasonic FX-551L3-P-C2 is a digital fiber sensor designed with a 2m cable and a one-shot timer feature. It is constructed with a polycarbonate case cover and polyacetal for the switch, ensuring durability. This sensor is pre-wired with a 4-core 0.2mm2 PVC cable that terminates with bare end flying leads for easy integration into various systems. It offers a degree of protection rated at IP40, making it suitable for environments where protection against solid objects is necessary. The sensor includes 1 x digital output (PNP open-collector / 24Vdc / 50mA) for efficient signal processing. With a response time of 250µs / 0.00025 s, it provides quick and accurate detection for automation applications.

Panasonic

FX-501

Verified stock: 0

Panasonic FX-501 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501 offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It has one digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times from 25µs (0.000025 s) in H-SP mode to 24ms (0.024 s) in HYPR mode. The device includes a 4-digit red LED display and a 3-digit green LED display for clear, easy-to-read output and settings information. Power consumption is 0.96 W in normal mode and 0.68 W in Eco mode.

Panasonic

FX-551P-C2

Verified stock: 0

Panasonic FX-551P-C2 is an amplifier for sensors, specifically a digital fiber sensor amplifier featuring a red LED with a 2m cable. It is designed with a polycarbonate case cover and polyacetal switches, ensuring durability. This part comes pre-wired with a 2m length 0.2mm2 3-core cabtyre cable terminated with bare end flying leads for easy integration. It operates within an ambient air temperature range of -10 to +55 °C and offers a degree of protection rated at IP40. The FX-551P-C2 includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.1ms to 32s, and a one-shot timer, enhancing its versatility in application. It features outputs short-circuit protection for safety and reliability in operation. With a light wavelength of 660 nm and operating modes that include Light-ON and Dark-ON, it caters to a variety of sensing needs. The current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in eco mode, both at 24Vdc. It provides one digital output (PNP open-collector / 24Vdc / 100mA) and boasts a response time that varies from 60µs to 24ms depending on the setting. The unit is equipped with a 4-digit red LED display and a 4-digit green LED display for clear, immediate feedback. Power consumption is 0.96 W in normal mode and 0.68 W in eco mode, making it an energy-conscious choice for sensor amplification needs.

Panasonic

FX-505-C2

Verified stock: 0

Panasonic FX-505-C2 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED and a 2m cable. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, one-shot timer, three light emission levels plus an auto-setting (H-SP mode), hysteresis, shift amount, emission power, display turning, ECO, data bank loading saving, copying, code, reset, logical calculation settings, and threshold tracking. The case cover is made of polycarbonate, and the switch is TPEE. It comes pre-wired with a 2m 6-core cabtyre cable terminated with bare flying leads. The FX-505-C2 offers outputs short-circuit protection, is mounted on a DIN rail, and operates with a wavelength of 643 nm. It is designed to function in ambient air temperatures ranging from -10 to +55 °C and has an IP40 degree of protection. The cable consists of 6 cores, and it features 1 x analog output (4-20mA; 2ms response time). Its operating modes include Light-ON and Dark-ON, with a current consumption of 40mA / 0.04 A under normal conditions and 28mA / 0.028 A in eco mode at 24Vdc. The digital outputs include 1 x digital output (NPN open-collector / 24Vdc / 100mA), and it has a variable response time from 25µs to 24ms depending on the setting. The display is a combination of a 4-digit red LED and a 3-digit green LED, supporting a time delay function from 0.05ms to 32s. Power consumption is 0.96 W under normal conditions and 0.68 W in eco mode.

Panasonic

FX-7

Verified stock: 0

BEING OBSOLETED BY 12/31/05

Panasonic

FX-551L3-P-J

Verified stock: 0

Panasonic FX-551L3-P-J is a digital fiber sensor designed with a polycarbonate case cover and polyacetal switch. It features a one-shot timer function and is pre-wired with an M12 connector pigtail for connectivity. This sensor offers a degree of protection rated at IP40 and includes 1 x digital output (PNP open-collector / 24Vdc / 50mA). It boasts a response time of 250µs / 0.00025 s, facilitating rapid signal processing for automation applications.

Panasonic

FX-551-C2

Verified stock: 0

Panasonic FX-551-C2 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED and a 2m cable. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.1ms to 32s, and a one-shot timer. The case cover is made of polycarbonate, and the switch is constructed from polyacetal. This part is pre-wired with a 2m length 0.2mm2 3-core cabtyre cable terminated with bare end flying leads. It offers outputs short-circuit protection, operates at a wavelength of 660 nm, and can function within an ambient air temperature range of -10 to +55 °C. The FX-551-C2 has an IP40 degree of protection, supports both Light-ON and Dark-ON operating modes, and has a current consumption of 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in eco mode, both at 24Vdc. It features 1 x digital output (NPN open-collector / 24Vdc / 100mA), with response times varying from 60µs to 24ms depending on the setting. The display includes a 4-digit red LED and a 4-digit green LED. Power consumption is 0.96 W in normal mode and 0.68 W in eco mode.

Panasonic

FX-551

Verified stock: 0

Panasonic FX-551 is an amplifier for sensors, specifically designed as a digital fiber sensor amplifier featuring a red LED. It is constructed with a polycarbonate case cover and polyacetal switches, ensuring durability. This part is pre-equipped with a connector for easy installation and offers a wavelength of 660 nm. It operates efficiently within an ambient air temperature range of -10 to +55 °C and is protected by an IP40 degree of protection, safeguarding against solid objects larger than 1mm. The FX-551 supports both Light-ON and Dark-ON operating modes and has a low current consumption of 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It features a single digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times ranging from 60µs (0.000060 s) to 24ms (0.024 s), catering to different operational needs. Additionally, it includes an interference prevention function, an OFF-delay/ON-delay timer, and a one-shot timer with a time delay range of 0.1ms to 32s (0.0001-32 s). The power consumption is modest at 0.96 W in normal mode and 0.68 W in Eco mode. The device is equipped with a 4-digit red LED display and a 4-digit green LED display for clear, easy-to-read output information.

Panasonic

FX-551L3-P-C2

Verified stock: 0

Panasonic FX-551L3-P-C2 is a digital fiber sensor designed with a 2m cable and a one-shot timer feature. It is constructed with a polycarbonate case cover and polyacetal for the switch, ensuring durability. This sensor is pre-wired with a 4-core 0.2mm2 PVC cable that terminates with bare end flying leads for easy integration into various systems. It offers a degree of protection rated at IP40, making it suitable for environments where protection against solid objects is necessary. The sensor includes 1 x digital output (PNP open-collector / 24Vdc / 50mA) for efficient signal processing. With a response time of 250µs / 0.00025 s, it provides quick and accurate detection for automation applications.

Panasonic

FX-501

Verified stock: 0

Panasonic FX-501 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501 offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It has one digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times from 25µs (0.000025 s) in H-SP mode to 24ms (0.024 s) in HYPR mode. The device includes a 4-digit red LED display and a 3-digit green LED display for clear, easy-to-read output and settings information. Power consumption is 0.96 W in normal mode and 0.68 W in Eco mode.

Panasonic

FX-551P-C2

Verified stock: 0

Panasonic FX-551P-C2 is an amplifier for sensors, specifically a digital fiber sensor amplifier featuring a red LED with a 2m cable. It is designed with a polycarbonate case cover and polyacetal switches, ensuring durability. This part comes pre-wired with a 2m length 0.2mm2 3-core cabtyre cable terminated with bare end flying leads for easy integration. It operates within an ambient air temperature range of -10 to +55 °C and offers a degree of protection rated at IP40. The FX-551P-C2 includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.1ms to 32s, and a one-shot timer, enhancing its versatility in application. It features outputs short-circuit protection for safety and reliability in operation. With a light wavelength of 660 nm and operating modes that include Light-ON and Dark-ON, it caters to a variety of sensing needs. The current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in eco mode, both at 24Vdc. It provides one digital output (PNP open-collector / 24Vdc / 100mA) and boasts a response time that varies from 60µs to 24ms depending on the setting. The unit is equipped with a 4-digit red LED display and a 4-digit green LED display for clear, immediate feedback. Power consumption is 0.96 W in normal mode and 0.68 W in eco mode, making it an energy-conscious choice for sensor amplification needs.

Panasonic

FX-505-C2

Verified stock: 0

Panasonic FX-505-C2 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED and a 2m cable. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, one-shot timer, three light emission levels plus an auto-setting (H-SP mode), hysteresis, shift amount, emission power, display turning, ECO, data bank loading saving, copying, code, reset, logical calculation settings, and threshold tracking. The case cover is made of polycarbonate, and the switch is TPEE. It comes pre-wired with a 2m 6-core cabtyre cable terminated with bare flying leads. The FX-505-C2 offers outputs short-circuit protection, is mounted on a DIN rail, and operates with a wavelength of 643 nm. It is designed to function in ambient air temperatures ranging from -10 to +55 °C and has an IP40 degree of protection. The cable consists of 6 cores, and it features 1 x analog output (4-20mA; 2ms response time). Its operating modes include Light-ON and Dark-ON, with a current consumption of 40mA / 0.04 A under normal conditions and 28mA / 0.028 A in eco mode at 24Vdc. The digital outputs include 1 x digital output (NPN open-collector / 24Vdc / 100mA), and it has a variable response time from 25µs to 24ms depending on the setting. The display is a combination of a 4-digit red LED and a 3-digit green LED, supporting a time delay function from 0.05ms to 32s. Power consumption is 0.96 W under normal conditions and 0.68 W in eco mode.

Panasonic

FX-7

Verified stock: 0

BEING OBSOLETED BY 12/31/05

Panasonic

FX-551L3-P-J

Verified stock: 0

Panasonic FX-551L3-P-J is a digital fiber sensor designed with a polycarbonate case cover and polyacetal switch. It features a one-shot timer function and is pre-wired with an M12 connector pigtail for connectivity. This sensor offers a degree of protection rated at IP40 and includes 1 x digital output (PNP open-collector / 24Vdc / 50mA). It boasts a response time of 250µs / 0.00025 s, facilitating rapid signal processing for automation applications.

Panasonic

FX-551-C2

Verified stock: 0

Panasonic FX-551-C2 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED and a 2m cable. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.1ms to 32s, and a one-shot timer. The case cover is made of polycarbonate, and the switch is constructed from polyacetal. This part is pre-wired with a 2m length 0.2mm2 3-core cabtyre cable terminated with bare end flying leads. It offers outputs short-circuit protection, operates at a wavelength of 660 nm, and can function within an ambient air temperature range of -10 to +55 °C. The FX-551-C2 has an IP40 degree of protection, supports both Light-ON and Dark-ON operating modes, and has a current consumption of 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in eco mode, both at 24Vdc. It features 1 x digital output (NPN open-collector / 24Vdc / 100mA), with response times varying from 60µs to 24ms depending on the setting. The display includes a 4-digit red LED and a 4-digit green LED. Power consumption is 0.96 W in normal mode and 0.68 W in eco mode.

Panasonic

FX-551

Verified stock: 0

Panasonic FX-551 is an amplifier for sensors, specifically designed as a digital fiber sensor amplifier featuring a red LED. It is constructed with a polycarbonate case cover and polyacetal switches, ensuring durability. This part is pre-equipped with a connector for easy installation and offers a wavelength of 660 nm. It operates efficiently within an ambient air temperature range of -10 to +55 °C and is protected by an IP40 degree of protection, safeguarding against solid objects larger than 1mm. The FX-551 supports both Light-ON and Dark-ON operating modes and has a low current consumption of 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It features a single digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times ranging from 60µs (0.000060 s) to 24ms (0.024 s), catering to different operational needs. Additionally, it includes an interference prevention function, an OFF-delay/ON-delay timer, and a one-shot timer with a time delay range of 0.1ms to 32s (0.0001-32 s). The power consumption is modest at 0.96 W in normal mode and 0.68 W in Eco mode. The device is equipped with a 4-digit red LED display and a 4-digit green LED display for clear, easy-to-read output information.

Panasonic

FX-551L3-P-C2

Verified stock: 0

Panasonic FX-551L3-P-C2 is a digital fiber sensor designed with a 2m cable and a one-shot timer feature. It is constructed with a polycarbonate case cover and polyacetal for the switch, ensuring durability. This sensor is pre-wired with a 4-core 0.2mm2 PVC cable that terminates with bare end flying leads for easy integration into various systems. It offers a degree of protection rated at IP40, making it suitable for environments where protection against solid objects is necessary. The sensor includes 1 x digital output (PNP open-collector / 24Vdc / 50mA) for efficient signal processing. With a response time of 250µs / 0.00025 s, it provides quick and accurate detection for automation applications.

Panasonic

FX-501

Verified stock: 0

Panasonic FX-501 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501 offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. It has one digital output (NPN open-collector / 24Vdc / 100mA) and offers a variety of response times from 25µs (0.000025 s) in H-SP mode to 24ms (0.024 s) in HYPR mode. The device includes a 4-digit red LED display and a 3-digit green LED display for clear, easy-to-read output and settings information. Power consumption is 0.96 W in normal mode and 0.68 W in Eco mode.

Panasonic

FX-551P-C2

Verified stock: 0

Panasonic FX-551P-C2 is an amplifier for sensors, specifically a digital fiber sensor amplifier featuring a red LED with a 2m cable. It is designed with a polycarbonate case cover and polyacetal switches, ensuring durability. This part comes pre-wired with a 2m length 0.2mm2 3-core cabtyre cable terminated with bare end flying leads for easy integration. It operates within an ambient air temperature range of -10 to +55 °C and offers a degree of protection rated at IP40. The FX-551P-C2 includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.1ms to 32s, and a one-shot timer, enhancing its versatility in application. It features outputs short-circuit protection for safety and reliability in operation. With a light wavelength of 660 nm and operating modes that include Light-ON and Dark-ON, it caters to a variety of sensing needs. The current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in eco mode, both at 24Vdc. It provides one digital output (PNP open-collector / 24Vdc / 100mA) and boasts a response time that varies from 60µs to 24ms depending on the setting. The unit is equipped with a 4-digit red LED display and a 4-digit green LED display for clear, immediate feedback. Power consumption is 0.96 W in normal mode and 0.68 W in eco mode, making it an energy-conscious choice for sensor amplification needs.

Panasonic

FX-505-C2

Verified stock: 0

Panasonic FX-505-C2 is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED and a 2m cable. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, one-shot timer, three light emission levels plus an auto-setting (H-SP mode), hysteresis, shift amount, emission power, display turning, ECO, data bank loading saving, copying, code, reset, logical calculation settings, and threshold tracking. The case cover is made of polycarbonate, and the switch is TPEE. It comes pre-wired with a 2m 6-core cabtyre cable terminated with bare flying leads. The FX-505-C2 offers outputs short-circuit protection, is mounted on a DIN rail, and operates with a wavelength of 643 nm. It is designed to function in ambient air temperatures ranging from -10 to +55 °C and has an IP40 degree of protection. The cable consists of 6 cores, and it features 1 x analog output (4-20mA; 2ms response time). Its operating modes include Light-ON and Dark-ON, with a current consumption of 40mA / 0.04 A under normal conditions and 28mA / 0.028 A in eco mode at 24Vdc. The digital outputs include 1 x digital output (NPN open-collector / 24Vdc / 100mA), and it has a variable response time from 25µs to 24ms depending on the setting. The display is a combination of a 4-digit red LED and a 3-digit green LED, supporting a time delay function from 0.05ms to 32s. Power consumption is 0.96 W under normal conditions and 0.68 W in eco mode.

Panasonic