8118294 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Ready status indication
  LED
• Logic interface, connection pattern
  00992264
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• DC nominal voltage
  24 V
• Product weight
  5054 g
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Size
  60
• Mounting position
  Any
• Symbol
  00997294
• Spindle type
  Ball screw drive
• Rotor position sensor
  Absolute encoder, single-turn
• Relative air humidity
  0 - 90 % Non-condensing
• Certification
  RCM compliance mark
• Guide value for payload, horizontal
  120 kg
• Additional moving mass per 10 mm stroke
  6.5 g
Spindle material
Roller bearing steel
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, connection type
Plug
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, communication mode
COM3 (230.4 kBd)
Stroke
400 mm
Spindle pitch
5 mm/U
Protection against torsion/guide
With plain-bearing guide
Max. speed
0.09 m/s
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. torque Mx
0 Nm
Max. torque Mz
6.4 Nm
Moving mass at 0 mm stroke
305 g
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Display
LED
Parameterization interface
IO-Link® User interface
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, type of connection
Plug
Number of digital logic inputs
2
Nominal current
5.3 A
IO-Link®, port class
A
IO-Link®, number of ports
1
Reversing backlash
100 µm
Piston rod thread
M12x1.25
Motor type
Stepper motor
Homing
Fixed stop block positive Reference switch
Repetition accuracy
±0.02 mm
Logic input specification
Based on IEC 61131-2, type 1
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Max. current of digital logic outputs
100 mA
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, minimum cycle time
1 ms
IO-Link®, protocol version
Device V 1.1
Stroke reserve
0 mm
Max. angle of rotation of the piston rod +/-
1 deg
Piston rod end
External thread
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Storage temperature
-20 °C ... 60 °C
Max. torque My
6.4 Nm
Basic weight with 0 mm stroke
2294 g
Piston rod material
High-alloy stainless steel
Input switching logic
NPN (negative switching) PNP (positive switching)
Characteristics of logic input
Configurable Not galvanically isolated
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, number of poles/wires
8
Max. current consumption
5300 mA
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Screw diameter
12 mm
Type code
EPCS
Design
Electric actuator With integrated drive
Max. acceleration
1.5 m/s²
Insulation protection class
B
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Max. feed force Fx
900 N
Additional weight per 10 mm stroke
69 g
Housing material
Wrought aluminum alloy, smooth-anodized
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. radial force on actuator shaft
230 N
Guide value for payload, vertical
46 kg
Type of mounting
With internal thread With accessories
Spindle nut material
Steel
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

8118294 Related Documents