8118292 Festo Electric Actuators

Product Details

• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic input specification
  Based on IEC 61131-2, type 1
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Logic interface, connection pattern
  00992264
• DC nominal voltage
  24 V
• Max. current consumption
  5300 mA
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Parameterization interface
  IO-Link® User interface
• Power supply, connection pattern
  00995989
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
• Work range of logic input
  24 V
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, minimum cycle time
  1 ms
• Size
  60
• Max. angle of rotation of the piston rod +/-
  1 deg
• Type code
  EPCS
Design
Electric actuator With integrated drive
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
0 °C ... 50 °C
Max. torque Mz
6.4 Nm
Max. feed force Fx
900 N
Additional moving mass per 10 mm stroke
6.5 g
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Additional functions
User interface Integrated end-position sensing
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, connection type
Plug
Power supply, number of pins/wires
4
Product weight
4364 g
Nominal current
5.3 A
IO-Link®, protocol version
Device V 1.1
Stroke
300 mm
Spindle pitch
5 mm/U
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Homing
Fixed stop block positive Reference switch
Insulation protection class
B
Certification
RCM compliance mark
Max. radial force on actuator shaft
230 N
Piston rod material
High-alloy stainless steel
Reversing backlash
100 µm
Screw diameter
12 mm
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, port class
A
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Piston rod end
External thread
Spindle type
Ball screw drive
Max. speed
0.09 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Storage temperature
-20 °C ... 60 °C
Guide value for payload, horizontal
120 kg
Moving mass at 0 mm stroke
305 g
Spindle nut material
Steel
KC characters
KC EMC
Display
LED
Ready status indication
LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, type of connection
Plug
Number of digital logic inputs
2
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Piston rod thread
M12x1.25
Motor type
Stepper motor
Rotor position sensor
Absolute encoder, single-turn
Duty cycle
100%
Relative air humidity
0 - 90 % Non-condensing
Degree of protection
IP40
Max. torque My
6.4 Nm
Guide value for payload, vertical
46 kg
Basic weight with 0 mm stroke
2294 g
Type of mounting
With internal thread With accessories
Spindle material
Roller bearing steel
Symbol
00997294
Rotor position sensor measuring principle
Magnetic
Max. acceleration
1.5 m/s²
Permissible voltage fluctuations
+/- 15 %
Max. torque Mx
0 Nm
Additional weight per 10 mm stroke
69 g
Housing material
Wrought aluminum alloy, smooth-anodized
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

8118292 Related Documents