8118286 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Logic input specification
  Based on IEC 61131-2, type 1
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Additional functions
  User interface Integrated end-position sensing
• Power supply, connection pattern
  00995989
• Spindle nut material
  Steel
• Display
  LED
• Parameterization interface
  IO-Link® User interface
• Power supply, type of connection
  Plug
• Max. current of digital logic outputs
  100 mA
• DC nominal voltage
  24 V
• Work range of logic input
  24 V
• IO-Link®, service data contents IN
  32 bit force 32 bit speed
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Reversing backlash
  100 µm
• Piston rod end
  External thread
Homing
Fixed stop block positive Reference switch
Insulation protection class
B
Storage temperature
-20 °C ... 60 °C
Max. torque My
2.9 Nm
Type of mounting
With internal thread With accessories
Piston rod material
High-alloy stainless steel
Ready status indication
LED
Logic interface, connection pattern
00992264
Logic interface, connection type
Plug
Number of digital logic inputs
2
Max. current consumption
3000 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data width IN
2 Byte
IO-Link®, number of ports
1
Stroke
300 mm
Max. angle of rotation of the piston rod +/-
1 deg
Spindle type
Ball screw drive
Max. acceleration
5 m/s²
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Certification
RCM compliance mark
Max. feed force Fx
250 N
Additional weight per 10 mm stroke
41 g
Max. cable length
15 m outputs 20 m for IO-Link® operation
Characteristics of logic input
Configurable Not galvanically isolated
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
IO-Link®, communication mode
COM3 (230.4 kBd)
Stroke reserve
0 mm
Type code
EPCS
Design
Electric actuator With integrated drive
Rotor position sensor measuring principle
Magnetic
Repetition accuracy
±0.02 mm
Degree of protection
IP40
Max. torque Mz
2.9 Nm
Guide value for payload, vertical
13 kg
Additional moving mass per 10 mm stroke
4.9 g
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires
8
Product weight
2415 g
Nominal current
3 A
IO-Link®, port class
A
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Screw diameter
10 mm
Motor type
Stepper motor
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor
Absolute encoder, single-turn
Permissible voltage fluctuations
+/- 15 %
Relative air humidity
0 - 90 % Non-condensing
Max. radial force on actuator shaft
180 N
Moving mass at 0 mm stroke
179 g
Housing material
Wrought aluminum alloy, smooth-anodized
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Rotor position sensor resolution
16 bit
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
1 ms
Size
45
Piston rod thread
M10x1.25
Spindle pitch
10 mm/U
Mounting position
Any
Symbol
00997294
Max. speed
0.23 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Max. torque Mx
0 Nm
Guide value for payload, horizontal
40 kg
Basic weight with 0 mm stroke
1185 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Roller bearing steel

8118286 Related Documents