5255537 Festo Servo Motors

Product Details

• Brake coil inductivity
  900 mH
• Note on ambient temperature
  Up to 80 °C with derating of -2.25% per degree Celsius
• Balancing quality
  G 2.5
• Electrical connection 1, connection type
  Hybrid plug
• Rotor position sensor for manufacturer designation
  EQI 1331
• Contamination level
  2
• Electrical connection 1, number of pins/wires
  15
• Brake current consumption
  1 A
• DC brake response delay
  ≤ 5 ms
• Standstill torque constant
  1.75 Nm/A
• Thermal resistance
  0.46 K/W
• Thermal time constant
  71 min
• Brake DC operating voltage
  24 V
• Brake power consumption
  24 W
• Type of winding switch
  Star inside
• Peak current
  28.6 A
• Degree of protection
  IP40
• Ambient temperature
  -15 °C ... 40 °C
• Permissible axial shaft load
  200 N
• Permissible radial shaft load
  1110 N
Conforms to standard
IEC 60034
Detent torque
< 1.0% of peak torque
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Measuring flange
300 x 300 x 20 mm, steel
Max. installation height
4000 m
Max. brake no-load speed
10000 1/min
Brake stopping current
0.73 A
Storage lifetime, under nominal conditions
20000 h
Cross inductivity Lq (phase)
11.8 mH
Rotor position encoder for absolutely detectable revolutions
4096
Rotor position sensor measuring principle
Inductive
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal operating voltage DC
565 V
Phase-phase winding resistance
1.49 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Relative air humidity
0 - 90 %
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
30.5 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Max. winding temperature
155 °C
Rotor position encoder for DC operating voltage
5 V
Number of pole pairs
5
Electric time constant
15.8 ms
Rotor position encoder system accuracy angle measurement
-65 arcsec ... 65 arcsec
Type code
EMMT-AS
Continuous stall current
6.7 A
Rotor position sensor resolution
19 bit
Winding inductance phase-phase
15.7 mH
Corrosion resistance class (CRC)
0 - No corrosion stress
Brake holding torque
18 Nm
Nominal torque
6.6 Nm
MTTF, subcomponent
190 years, rotor position sensor
Product weight
10100 g
Electrical connection for input 1, connection pattern
00995913
Mounting position
Any
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Motor type as per EN 60034-7
IM B5 IM V3
Certificate issuing authority
UL E342973
Brake airflow
0.73 A
Brake coil resistance
24 Ohm
Max. mechanical speed
13000 1/min
Max. brake friction work
15000 J
Brake separation time
≤ 80 ms
Winding longitudinal inductivity Ld (phase)
8.7 mH
Rotor position sensor interface
EnDat® 22
Nominal rotary speed
2700 1/min
Motor nominal power
1870 W
Rating class according to EN 60034-1
S1
Thermal class according to EN 60034-1
F
Stall torque
10.4 Nm
Interface code, motor out
100A
Brake closing time
≤ 40 ms
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder for positional values per revolution
524288
Rotor position sensor
Absolute encoder, multi-turn
Max. rotational speed
3770 1/min
Motor constants
1.54 Nm/A
Motor nominal current
4.3 A
Voltage constant, phase-to-phase
106 mVmin
Storage temperature
-20 °C ... 70 °C
Total output inertia moment
8.06 kgcm²
Brake mass moment of inertia
2.15 kgcm²
Switching cycles, holding brake
10 million idle actuations (without friction work!)

Related documents 5255537 Specs