5255445 Festo Servo Motors

Product Details

• Mounting position
  Any
• Measuring flange
  250 x 250 x 15 mm, steel
• Certificate issuing authority
  UL E342973
• Rotor position encoder for DC operating voltage
  5 V
• Electric time constant
  7 ms
• Standstill torque constant
  0.93 Nm/A
• Rotor position sensor
  Absolute encoder, single-turn
• Max. rotational speed
  7100 1/min
• Continuous stall current
  4.3 A
• Electrical connection for input 1, connection pattern
  00995913
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Balancing quality
  G 2.5
• Number of pole pairs
  5
• Rotor position encoder for absolutely detectable revolutions
  1
• Thermal resistance
  0.68 K/W
• Motor constants
  0.82 Nm/A
• Motor nominal power
  910 W
• Winding inductance phase-phase
  12.6 mH
• Relative air humidity
  0 - 90 %
• Degree of protection
  IP40
Stall torque
3.5 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Contamination level
2
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Winding longitudinal inductivity Ld (phase)
7.5 mH
Thermal time constant
48 min
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Phase-phase winding resistance
2.69 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Thermal class according to EN 60034-1
F
Permissible axial shaft load
120 N
Product weight
3290 g
Electrical connection 1, connection type
Hybrid plug
Rotor position sensor for manufacturer designation
ECI 1118
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Rotor position sensor resolution
18 bit
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Electrical connection 1, number of pins/wires
15
Max. mechanical speed
14000 1/min
Cross inductivity Lq (phase)
9.45 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Type code
EMMT-AS
Rotor position sensor measuring principle
Inductive
Nominal operating voltage DC
565 V
Motor nominal current
3.5 A
Voltage constant, phase-to-phase
56 mVmin
Storage temperature
-20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Nominal torque
2.9 Nm
MTTF, subcomponent
190 years, rotor position sensor
Interface code, motor out
80P
Detent torque
< 1.0% of peak torque
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Max. winding temperature
155 °C
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder for positional values per revolution
262144
Rotor position sensor interface
EnDat® 22
Nominal rotary speed
3000 1/min
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Ambient temperature
-15 °C ... 40 °C
Peak current
17.5 A
Corrosion resistance class (CRC)
0 - No corrosion stress
Total output inertia moment
2.21 kgcm²
Peak torque
9.9 Nm
Permissible radial shaft load
620 N
Conforms to standard
IEC 60034

5255445 Related Documents