5255529 Festo Servo Motors
Part#:5255529
Manufacturer:Festo
Alt. Part#:EMMT-AS-100-S-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-100-S-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, St
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255529 Festo price in the box on the right side or send a quick quote.
Product Details
- Electrical connection for input 1, connection pattern 00995913
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Balancing quality G 2.5
- Brake current consumption 0.75 A
- Max. brake friction work 12000 J
- Rotor position encoder for absolutely detectable revolutions 4096
- Rotor position sensor interface EnDat® 22
- Max. rotational speed 3970 1/min
- Nominal operating voltage DC 565 V
- Rotor position sensor resolution 19 bit
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Certification RCM compliance mark c UL us - Recognized (OL)
- Brake holding torque 11 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Permissible radial shaft load 1110 N
- Detent torque < 1.0% of peak torque
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Electrical connection 1, number of pins/wires 15
- Certificate issuing authority UL E342973
- Brake coil resistance 32 Ohm
- Storage lifetime, under nominal conditions 20000 h
- Cross inductivity Lq (phase) 24.3 mH
- Thermal resistance 0.6 K/W
- Type code EMMT-AS
- Brake power consumption 18 W
- Type of winding switch Star inside
- Voltage constant, phase-to-phase 101 mVmin
- Storage temperature -20 °C ... 70 °C
- Brake mass moment of inertia 0.74 kgcm²
- Permissible axial shaft load 200 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Mounting position Any
- Contamination level 2
- Motor type as per EN 60034-7 IM B5 IM V3
- Brake airflow 0.54 A
- Brake coil inductivity 900 mH
- Rotor position encoder for DC operating voltage 5 V
- Brake closing time ≤ 20 ms
- Brake separation time ≤ 80 ms
- Winding longitudinal inductivity Ld (phase) 17.8 mH
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor Absolute encoder, multi-turn
- Brake DC operating voltage 24 V
- Motor nominal current 3.5 A
- Phase-phase winding resistance 3.35 Ohm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Ambient temperature -15 °C ... 40 °C
- Peak torque 13.7 Nm
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Conforms to standard IEC 60034
- Electrical connection 1, connection type Hybrid plug
- Rotor position sensor for manufacturer designation EQI 1331
- Measuring flange 300 x 300 x 20 mm, steel
- Max. installation height 4000 m
- Brake stopping current 0.54 A
- DC brake response delay ≤ 4 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 74 min
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Continuous stall current 4.4 A
- Motor nominal power 1450 W
- Rating class according to EN 60034-1 S1
- Relative air humidity 0 - 90 %
- Total output inertia moment 4.04 kgcm²
- Stall torque 6.3 Nm
- Interface code, motor out 100A
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Max. winding temperature 155 °C
- Max. brake no-load speed 10000 1/min
- Max. mechanical speed 13000 1/min
- Number of pole pairs 5
- Electric time constant 14.5 ms
- Standstill torque constant 1.67 Nm/A
- Rotor position encoder system accuracy angle measurement -65 arcsec ... 65 arcsec
- Rotor position sensor measuring principle Inductive
- Nominal rotary speed 2700 1/min
- Motor constants 1.45 Nm/A
- Winding inductance phase-phase 32.4 mH
- Peak current 13.7 A
- Degree of protection IP40
- Thermal class according to EN 60034-1 F
- Nominal torque 5.1 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Product weight 6700 g
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 5255529 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?
