5255425 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Rotor position sensor for manufacturer designation
  ECI 1118
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Measuring flange
  250 x 250 x 15 mm, steel
• Storage lifetime, under nominal conditions
  20000 h
• Winding longitudinal inductivity Ld (phase)
  10.2 mH
• Thermal resistance
  0.95 K/W
• Rotor position sensor interface
  EnDat® 22
• Continuous stall current
  3.1 A
• Rotor position sensor resolution
  18 bit
• Peak current
  8.4 A
• Rating class according to EN 60034-1
  S1
• Storage temperature
  -20 °C ... 70 °C
• Permissible axial shaft load
  120 N
• MTTF, subcomponent
  190 years, rotor position sensor
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Motor type as per EN 60034-7
  IM B5 IM V3
• Max. winding temperature
  155 °C
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Standstill torque constant
0.57 Nm/A
Rotor position sensor
Absolute encoder, single-turn
Nominal rotary speed
3000 1/min
Motor nominal current
2.7 A
Voltage constant, phase-to-phase
34.3 mVmin
Ambient temperature
-15 °C ... 40 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Stall torque
1.46 Nm
Permissible radial shaft load
620 N
Product weight
2020 g
Electrical connection for input 1, connection pattern
00995913
Contamination level
2
Balancing quality
G 2.5
Max. mechanical speed
14000 1/min
Max. installation height
4000 m
Cross inductivity Lq (phase)
12.2 mH
Thermal time constant
42 min
Rotor position sensor measuring principle
Inductive
Motor nominal power
408 W
Winding inductance phase-phase
16.3 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Electrical connection 1, connection technology
M23x1
Mounting position
Any
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Certificate issuing authority
UL E342973
Number of pole pairs
5
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Type code
EMMT-AS
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Max. rotational speed
6700 1/min
Phase-phase winding resistance
4.93 Ohm
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Nominal torque
1.3 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Conforms to standard
IEC 60034
Detent torque
< 1.0% of peak torque
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Electrical connection 1, number of pins/wires
15
Rotor position encoder for DC operating voltage
5 V
Electric time constant
4.9 ms
Rotor position encoder for absolutely detectable revolutions
1
Rotor position encoder for positional values per revolution
262144
Nominal operating voltage DC
325 V
Motor constants
0.48 Nm/A
Type of winding switch
Star inside
Relative air humidity
0 - 90 %
Total output inertia moment
1.33 kgcm²
Thermal class according to EN 60034-1
F
Peak torque
2.8 Nm
Interface code, motor out
80P

5255425 Related Documents