5255431 Festo Servo Motors
Part#:5255431
Manufacturer:Festo
Alt. Part#:EMMT-AS-80-S-HS-RSB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-80-S-HS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255431 Festo price in the box on the right side or send a quick quote.
Product Details
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Mounting position Any
- Max. installation height 4000 m
- Cross inductivity Lq (phase) 29.8 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Motor nominal current 1.76 A
- Peak current 5.4 A
- Storage temperature -20 °C ... 70 °C
- Nominal torque 1.3 Nm
- Permissible radial shaft load 620 N
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Detent torque < 1.0% of peak torque
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Balancing quality G 2.5
- Rotor position encoder for DC operating voltage 5 V
- Brake coil resistance 48 Ohm
- Brake closing time ≤ 15 ms
- Brake separation time ≤ 55 ms
- Rotor position encoder for absolutely detectable revolutions 1
- Type code EMMT-AS
- Nominal rotary speed 3000 1/min
- Brake power consumption 12 W
- Phase-phase winding resistance 12.4 Ohm
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature -15 °C ... 40 °C
- Total output inertia moment 1.64 kgcm²
- Brake mass moment of inertia 0.249 kgcm²
- MTTFd, subcomponent 380 years, rotor position sensor
- Conforms to standard IEC 60034
- Electrical connection for input 1, connection pattern 00995913
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Measuring flange 250 x 250 x 15 mm, steel
- Electrical connection 1, number of pins/wires 15
- Max. brake no-load speed 10000 1/min
- Max. mechanical speed 14000 1/min
- Brake stopping current 0.37 A
- Winding longitudinal inductivity Ld (phase) 25 mH
- Thermal time constant 42 min
- Rotor position sensor interface EnDat® 22
- Brake DC operating voltage 24 V
- Motor nominal power 408 W
- Winding inductance phase-phase 39.8 mH
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Degree of protection IP40
- Certification RCM compliance mark c UL us - Recognized (OL)
- Peak torque 2.8 Nm
- Interface code, motor out 80P
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Electrical connection 1, connection type Hybrid plug
- Rotor position sensor for manufacturer designation ECI 1118
- Contamination level 2
- Motor type as per EN 60034-7 IM B5 IM V3
- Max. winding temperature 155 °C
- Brake airflow 0.37 A
- Brake current consumption 0.5 A
- Number of pole pairs 5
- Brake holding torque 4.5 Nm
- DC brake response delay ≤ 3 ms
- Standstill torque constant 0.89 Nm/A
- Rotor position encoder for positional values per revolution 262144
- Rotor position sensor measuring principle Inductive
- Continuous stall current 2 A
- Nominal operating voltage DC 565 V
- Type of winding switch Star inside
- Voltage constant, phase-to-phase 53.6 mVmin
- Relative air humidity 0 - 90 %
- Permissible axial shaft load 120 N
- MTTF, subcomponent 190 years, rotor position sensor
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Brake coil inductivity 1000 mH
- Storage lifetime, under nominal conditions 20000 h
- Max. brake friction work 8200 J
- Electric time constant 4.8 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal resistance 0.95 K/W
- Rotor position sensor Absolute encoder, single-turn
- Max. rotational speed 7440 1/min
- Motor constants 0.74 Nm/A
- Rotor position sensor resolution 18 bit
- Rating class according to EN 60034-1 S1
- Thermal class according to EN 60034-1 F
- Stall torque 1.46 Nm
- Product weight 2720 g
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 5255431 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?
