5255429 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Rotor position sensor for manufacturer designation
  ECI 1118
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Motor type as per EN 60034-7
  IM B5 IM V3
• Max. mechanical speed
  14000 1/min
• Cross inductivity Lq (phase)
  29.8 mH
• Rotor position encoder for absolutely detectable revolutions
  1
• Thermal time constant
  42 min
• Rotor position sensor measuring principle
  Inductive
• Motor constants
  0.74 Nm/A
• Rotor position sensor resolution
  18 bit
• Peak current
  5.4 A
• Ambient temperature
  -15 °C ... 40 °C
• Stall torque
  1.46 Nm
• Interface code, motor out
  80P
• Electrical connection for input 1, connection pattern
  00995913
• Contamination level
  2
• Balancing quality
  G 2.5
• Max. winding temperature
  155 °C
• Storage lifetime, under nominal conditions
  20000 h
Winding longitudinal inductivity Ld (phase)
25 mH
Rotor position encoder for positional values per revolution
262144
Rotor position sensor interface
EnDat® 22
Max. rotational speed
7440 1/min
Phase-phase winding resistance
12.4 Ohm
Voltage constant, phase-to-phase
53.6 mVmin
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Permissible axial shaft load
120 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Detent torque
< 1.0% of peak torque
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Electrical connection 1, number of pins/wires
15
Continuous stall current
2 A
Nominal rotary speed
3000 1/min
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Total output inertia moment
1.33 kgcm²
Permissible radial shaft load
620 N
Conforms to standard
IEC 60034
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Mounting position
Any
Measuring flange
250 x 250 x 15 mm, steel
Rotor position encoder for DC operating voltage
5 V
Number of pole pairs
5
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Type code
EMMT-AS
Nominal operating voltage DC
565 V
Motor nominal power
408 W
Winding inductance phase-phase
39.8 mH
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Nominal torque
1.3 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Max. installation height
4000 m
Electric time constant
4.8 ms
Standstill torque constant
0.89 Nm/A
Thermal resistance
0.95 K/W
Rotor position sensor
Absolute encoder, single-turn
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor nominal current
1.76 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
2.8 Nm
MTTF, subcomponent
190 years, rotor position sensor
Product weight
2020 g

5255429 Related Documents