5255531 Festo Servo Motors

Product Details

• Electrical connection for input 1, connection pattern
  00995913
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Measuring flange
  300 x 300 x 20 mm, steel
• Electrical connection 1, number of pins/wires
  15
• Storage lifetime, under nominal conditions
  20000 h
• Standstill torque constant
  1.66 Nm/A
• Thermal resistance
  0.5 K/W
• Rotor position sensor measuring principle
  Inductive
• Continuous stall current
  5.9 A
• Motor nominal power
  1770 W
• Motor nominal current
  4.3 A
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Degree of protection
  IP40
• Ambient temperature
  -15 °C ... 40 °C
• Peak torque
  22.4 Nm
• Permissible radial shaft load
  1110 N
• Conforms to standard
  IEC 60034
• Electrical connection 1, connection technology
  M23x1
• Rotor position sensor for manufacturer designation
  EQI 1331
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Certificate issuing authority
UL E342973
Max. mechanical speed
13000 1/min
Rotor position encoder for absolutely detectable revolutions
4096
Thermal time constant
73 min
Nominal rotary speed
2700 1/min
Rotor position sensor resolution
19 bit
Type of winding switch
Star inside
Certification
RCM compliance mark c UL us - Recognized (OL)
MTTF, subcomponent
190 years, rotor position sensor
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Contamination level
2
Max. installation height
4000 m
Electric time constant
16.6 ms
Rotor position encoder system accuracy angle measurement
-65 arcsec ... 65 arcsec
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal operating voltage DC
565 V
Voltage constant, phase-to-phase
100 mVmin
Corrosion resistance class (CRC)
0 - No corrosion stress
Thermal class according to EN 60034-1
F
Stall torque
8.6 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Detent torque
< 1.0% of peak torque
Motor type as per EN 60034-7
IM B5 IM V3
Rotor position encoder for DC operating voltage
5 V
Number of pole pairs
5
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Winding longitudinal inductivity Ld (phase)
10.2 mH
Type code
EMMT-AS
Max. rotational speed
3980 1/min
Motor constants
1.46 Nm/A
Phase-phase winding resistance
1.84 Ohm
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Total output inertia moment
4.46 kgcm²
Permissible axial shaft load
200 N
Interface code, motor out
100A
Electrical connection 1, connection type
Hybrid plug
Mounting position
Any
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Balancing quality
G 2.5
Max. winding temperature
155 °C
Cross inductivity Lq (phase)
15.3 mH
Rotor position encoder for positional values per revolution
524288
Rotor position sensor
Absolute encoder, multi-turn
Rotor position sensor interface
EnDat® 22
Winding inductance phase-phase
20.4 mH
Peak current
22.1 A
Relative air humidity
0 - 90 %
Nominal torque
6.3 Nm
Product weight
7100 g

Related documents 5255531 Specs