5255447 Festo Servo Motors

Product Details

• Balancing quality
  G 2.5
• Electrical connection 1, connection technology
  M23x1
• Electrical connection 1, connection type
  Hybrid plug
• Detent torque
  < 1.0% of peak torque
• Electrical connection for input 1, connection pattern
  00995913
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Rotor position sensor for manufacturer designation
  ECI 1118
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Mounting position
  Any
• Contamination level
  2
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Measuring flange
  250 x 250 x 15 mm, steel
• Motor type as per EN 60034-7
  IM B5 IM V3
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Certificate issuing authority
  UL E342973
• Electrical connection 1, number of pins/wires
  15
• Max. winding temperature
  155 °C
• Max. brake no-load speed
  10000 1/min
Max. installation height
4000 m
Brake airflow
0.45 A
Brake coil resistance
38.4 Ohm
Brake current consumption
0.63 A
Brake coil inductivity
900 mH
Rotor position encoder for DC operating voltage
5 V
Max. mechanical speed
14000 1/min
Brake stopping current
0.45 A
Number of pole pairs
5
Storage lifetime, under nominal conditions
20000 h
Brake closing time
≤ 30 ms
Brake separation time
≤ 45 ms
Electric time constant
7 ms
Max. brake friction work
12000 J
DC brake response delay
≤ 4 ms
Winding longitudinal inductivity Ld (phase)
7.5 mH
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Standstill torque constant
0.93 Nm/A
Cross inductivity Lq (phase)
9.45 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Thermal resistance
0.68 K/W
Rotor position encoder for absolutely detectable revolutions
1
Rotor position encoder for positional values per revolution
262144
Type code
EMMT-AS
Rotor position sensor
Absolute encoder, single-turn
Thermal time constant
48 min
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Rotor position sensor measuring principle
Inductive
Rotor position sensor interface
EnDat® 22
Max. rotational speed
7100 1/min
Brake DC operating voltage
24 V
Continuous stall current
4.3 A
Motor constants
0.82 Nm/A
Brake power consumption
15 W
Nominal rotary speed
3000 1/min
Rotor position sensor resolution
18 bit
Peak current
17.5 A
Degree of protection
IP40
Nominal torque
2.9 Nm
Permissible axial shaft load
120 N
Interface code, motor out
80P
Nominal operating voltage DC
565 V
Winding inductance phase-phase
12.6 mH
Voltage constant, phase-to-phase
56 mVmin
Storage temperature
-20 °C ... 70 °C
Ambient temperature
-15 °C ... 40 °C
Total output inertia moment
2.72 kgcm²
MTTFd, subcomponent
380 years, rotor position sensor
Product weight
4120 g
Motor nominal power
910 W
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Corrosion resistance class (CRC)
0 - No corrosion stress
Brake holding torque
7 Nm
Stall torque
3.5 Nm
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Motor nominal current
3.5 A
Phase-phase winding resistance
2.69 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake mass moment of inertia
0.459 kgcm²
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Thermal class according to EN 60034-1
F
Peak torque
9.9 Nm
Permissible radial shaft load
620 N
Conforms to standard
IEC 60034

Related documents 5255447 Specs