5255534 Festo Servo Motors

Product Details

• Balancing quality
  G 2.5
• Cross inductivity Lq (phase)
  11.8 mH
• Thermal resistance
  0.46 K/W
• Rotor position sensor measuring principle
  Inductive
• Nominal rotary speed
  2700 1/min
• Rotor position sensor resolution
  19 bit
• Rating class according to EN 60034-1
  S1
• Ambient temperature
  -15 °C ... 40 °C
• Permissible axial shaft load
  200 N
• Detent torque
  < 1.0% of peak torque
• Rotor position sensor for manufacturer designation
  ECI 1319
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Note on ambient temperature
  Up to 80 °C with derating of -1.75% per degree Celsius
• Electrical connection 1, number of pins/wires
  15
• Storage lifetime, under nominal conditions
  20000 h
• Winding longitudinal inductivity Ld (phase)
  8.7 mH
• Standstill torque constant
  1.75 Nm/A
• Type code
  EMMT-AS
• Max. rotational speed
  3770 1/min
• Motor nominal current
  4.7 A
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Nominal torque
7.2 Nm
Stall torque
10.8 Nm
MTTF, subcomponent
190 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection 1, connection type
Hybrid plug
Mounting position
Any
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Certificate issuing authority
UL E342973
Max. mechanical speed
13000 1/min
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder system accuracy angle measurement
-65 arcsec ... 65 arcsec
Rotor position sensor
Absolute encoder, single-turn
Continuous stall current
7 A
Motor constants
1.54 Nm/A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Certification
RCM compliance mark c UL us - Recognized (OL)
Total output inertia moment
5.77 kgcm²
MTTFd, subcomponent
380 years, rotor position sensor
Interface code, motor out
100A
Electrical connection for input 1, connection pattern
00995913
Contamination level
2
Measuring flange
300 x 300 x 20 mm, steel
Max. installation height
4000 m
Rotor position encoder for DC operating voltage
5 V
Rotor position encoder for absolutely detectable revolutions
1
Rotor position encoder for positional values per revolution
524288
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor nominal power
2030 W
Winding inductance phase-phase
15.7 mH
Voltage constant, phase-to-phase
106 mVmin
Storage temperature
-20 °C ... 70 °C
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Motor type as per EN 60034-7
IM B5 IM V3
Max. winding temperature
155 °C
Number of pole pairs
5
Electric time constant
15.8 ms
Thermal time constant
71 min
Rotor position sensor interface
EnDat® 22
Nominal operating voltage DC
565 V
Phase-phase winding resistance
1.49 Ohm
Peak current
28.6 A
Relative air humidity
0 - 90 %
Thermal class according to EN 60034-1
F
Peak torque
30.5 Nm
Permissible radial shaft load
1110 N
Conforms to standard
IEC 60034
Product weight
8700 g

5255534 Related Documents