5255533 Festo Servo Motors
Part#:5255533
Manufacturer:Festo
Alt. Part#:EMMT-AS-100-M-HS-RMB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-100-M-HS-RMB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, St
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255533 Festo price in the box on the right side or send a quick quote.
Product Details
- Electrical connection for input 1, connection pattern 00995913
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Measuring flange 300 x 300 x 20 mm, steel
- Certificate issuing authority UL E342973
- Brake current consumption 0.75 A
- Number of pole pairs 5
- Cross inductivity Lq (phase) 15.3 mH
- Winding longitudinal inductivity Ld (phase) 10.2 mH
- Thermal resistance 0.5 K/W
- Type code EMMT-AS
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake DC operating voltage 24 V
- Peak current 22.1 A
- Rating class according to EN 60034-1 S1
- Relative air humidity 0 - 90 %
- Total output inertia moment 5.34 kgcm²
- Stall torque 8.6 Nm
- Permissible radial shaft load 1110 N
- Product weight 8200 g
- Contamination level 2
- Electrical connection 1, connection type Hybrid plug
- Rotor position sensor for manufacturer designation EQI 1331
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Max. winding temperature 155 °C
- Max. installation height 4000 m
- Max. mechanical speed 13000 1/min
- Storage lifetime, under nominal conditions 20000 h
- DC brake response delay ≤ 4 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Rotor position encoder for positional values per revolution 524288
- Rotor position sensor interface EnDat® 22
- Nominal rotary speed 2700 1/min
- Motor constants 1.46 Nm/A
- Nominal operating voltage DC 565 V
- Phase-phase winding resistance 1.84 Ohm
- Voltage constant, phase-to-phase 100 mVmin
- Degree of protection IP40
- Brake mass moment of inertia 0.74 kgcm²
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Motor type as per EN 60034-7 IM B5 IM V3
- Electrical connection 1, number of pins/wires 15
- Brake coil inductivity 900 mH
- Max. brake friction work 12000 J
- Brake separation time ≤ 80 ms
- Rotor position encoder for absolutely detectable revolutions 4096
- Thermal time constant 73 min
- Rotor position sensor measuring principle Inductive
- Continuous stall current 5.9 A
- Motor nominal power 1770 W
- Winding inductance phase-phase 20.4 mH
- Storage temperature -20 °C ... 70 °C
- Certification RCM compliance mark c UL us - Recognized (OL)
- Peak torque 22.4 Nm
- Permissible axial shaft load 200 N
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Balancing quality G 2.5
- Max. brake no-load speed 10000 1/min
- Brake coil resistance 32 Ohm
- Brake closing time ≤ 20 ms
- Standstill torque constant 1.66 Nm/A
- Motor nominal current 4.3 A
- Type of winding switch Star inside
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature -15 °C ... 40 °C
- Brake holding torque 11 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Conforms to standard IEC 60034
- Detent torque < 1.0% of peak torque
- Mounting position Any
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Brake airflow 0.54 A
- Rotor position encoder for DC operating voltage 5 V
- Brake stopping current 0.54 A
- Electric time constant 16.6 ms
- Rotor position encoder system accuracy angle measurement -65 arcsec ... 65 arcsec
- Rotor position sensor Absolute encoder, multi-turn
- Max. rotational speed 3980 1/min
- Brake power consumption 18 W
- Rotor position sensor resolution 19 bit
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Thermal class according to EN 60034-1 F
- Nominal torque 6.3 Nm
- MTTFd, subcomponent 380 years, rotor position sensor
- Interface code, motor out 100A
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 5255533 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?
