5255532 Festo Servo Motors

Product Details

• Detent torque
  < 1.0% of peak torque
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Brake separation time
  ≤ 80 ms
• Winding longitudinal inductivity Ld (phase)
  10.2 mH
• Rotor position encoder for DC operating voltage range
  3.6 V ... 14 V
• Type code
  EMMT-AS
• Brake DC operating voltage
  24 V
• Brake power consumption
  18 W
• Winding inductance phase-phase
  20.4 mH
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Relative air humidity
  0 - 90 %
• Nominal torque
  6.3 Nm
• Stall torque
  8.6 Nm
• MTTFd, subcomponent
  380 years, rotor position sensor
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Electrical connection for input 1, connection pattern
  00995913
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Measuring flange
  300 x 300 x 20 mm, steel
• Rotor position encoder for DC operating voltage
  5 V
Max. mechanical speed
13000 1/min
Brake closing time
≤ 20 ms
Cross inductivity Lq (phase)
15.3 mH
Rotor position sensor interface
EnDat® 22
Nominal rotary speed
2700 1/min
Motor constants
1.46 Nm/A
Rotor position sensor resolution
19 bit
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Brake holding torque
11 Nm
Peak torque
22.4 Nm
Product weight
8200 g
MTTF, subcomponent
190 years, rotor position sensor
Electrical connection 1, connection type
Hybrid plug
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Motor type as per EN 60034-7
IM B5 IM V3
Max. winding temperature
155 °C
Max. installation height
4000 m
Brake current consumption
0.75 A
Storage lifetime, under nominal conditions
20000 h
Electric time constant
16.6 ms
Rotor position encoder for absolutely detectable revolutions
1
Rotor position encoder for positional values per revolution
524288
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Nominal operating voltage DC
565 V
Phase-phase winding resistance
1.84 Ohm
Peak current
22.1 A
Storage temperature
-20 °C ... 70 °C
Total output inertia moment
5.34 kgcm²
Brake mass moment of inertia
0.74 kgcm²
Permissible radial shaft load
1110 N
Conforms to standard
IEC 60034
Rotor position sensor for manufacturer designation
ECI 1319
Contamination level
2
Balancing quality
G 2.5
Electrical connection 1, number of pins/wires
15
Max. brake no-load speed
10000 1/min
Brake coil resistance
32 Ohm
Number of pole pairs
5
DC brake response delay
≤ 4 ms
Rotor position encoder system accuracy angle measurement
-65 arcsec ... 65 arcsec
Thermal time constant
73 min
Rotor position sensor
Absolute encoder, single-turn
Max. rotational speed
3980 1/min
Motor nominal power
1770 W
Voltage constant, phase-to-phase
100 mVmin
Degree of protection
IP40
Certification
RCM compliance mark c UL us - Recognized (OL)
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Mounting position
Any
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Brake airflow
0.54 A
Brake coil inductivity
900 mH
Brake stopping current
0.54 A
Max. brake friction work
12000 J
Standstill torque constant
1.66 Nm/A
Thermal resistance
0.5 K/W
Rotor position sensor measuring principle
Inductive
Continuous stall current
5.9 A
Motor nominal current
4.3 A
Rating class according to EN 60034-1
S1
Thermal class according to EN 60034-1
F
Permissible axial shaft load
200 N
Interface code, motor out
100A

Related documents 5255532 Specs