5255530 Festo Servo Motors

Product Details

• Electrical connection for input 1, connection pattern
  00995913
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Motor type as per EN 60034-7
  IM B5 IM V3
• Electrical connection 1, number of pins/wires
  15
• Rotor position encoder for DC operating voltage
  5 V
• Electric time constant
  16.6 ms
• Motor nominal current
  4.3 A
• Electrical connection 1, connection technology
  M23x1
• Mounting position
  Any
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Max. winding temperature
  155 °C
• Max. mechanical speed
  13000 1/min
• Winding longitudinal inductivity Ld (phase)
  10.2 mH
• Rotor position encoder for positional values per revolution
  524288
• Rotor position sensor
  Absolute encoder, single-turn
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
• Motor constants
  1.46 Nm/A
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Number of pole pairs
5
Thermal resistance
0.5 K/W
Thermal time constant
73 min
Rotor position sensor resolution
19 bit
Rating class according to EN 60034-1
S1
Degree of protection
IP40
MTTF, subcomponent
190 years, rotor position sensor
Detent torque
< 1.0% of peak torque
Rotor position sensor for manufacturer designation
ECI 1319
Contamination level
2
Measuring flange
300 x 300 x 20 mm, steel
Max. installation height
4000 m
Cross inductivity Lq (phase)
15.3 mH
Rotor position encoder for absolutely detectable revolutions
1
Type code
EMMT-AS
Rotor position sensor measuring principle
Inductive
Motor nominal power
1770 W
Phase-phase winding resistance
1.84 Ohm
Type of winding switch
Star inside
Relative air humidity
0 - 90 %
Certification
RCM compliance mark c UL us - Recognized (OL)
Permissible axial shaft load
200 N
Product weight
7100 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection 1, connection type
Hybrid plug
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Balancing quality
G 2.5
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Standstill torque constant
1.66 Nm/A
Nominal rotary speed
2700 1/min
Nominal operating voltage DC
565 V
Winding inductance phase-phase
20.4 mH
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
Thermal class according to EN 60034-1
F
Peak torque
22.4 Nm
Interface code, motor out
100A
Conforms to standard
IEC 60034
Rotor position encoder system accuracy angle measurement
-65 arcsec ... 65 arcsec
Rotor position sensor interface
EnDat® 22
Max. rotational speed
3980 1/min
Continuous stall current
5.9 A
Peak current
22.1 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Total output inertia moment
4.46 kgcm²
Stall torque
8.6 Nm
Permissible radial shaft load
1110 N
Voltage constant, phase-to-phase
100 mVmin
Storage temperature
-20 °C ... 70 °C
Nominal torque
6.3 Nm
MTTFd, subcomponent
380 years, rotor position sensor

5255530 Related Documents