5255521 Festo Servo Motors

Product Details

• Detent torque
  < 1.0% of peak torque
• Rotor position sensor for manufacturer designation
  EQI 1331
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Measuring flange
  300 x 300 x 20 mm, steel
• Max. installation height
  4000 m
• Cross inductivity Lq (phase)
  24.3 mH
• Rotor position encoder for absolutely detectable revolutions
  4096
• Rotor position sensor measuring principle
  Inductive
• Max. rotational speed
  3970 1/min
• Phase-phase winding resistance
  3.35 Ohm
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Contamination level
  2
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Motor type as per EN 60034-7
  IM B5 IM V3
• Max. winding temperature
  155 °C
• Rotor position encoder for DC operating voltage
  5 V
• Winding longitudinal inductivity Ld (phase)
  17.8 mH
• Rotor position encoder system accuracy angle measurement
  -65 arcsec ... 65 arcsec
• Rotor position encoder for positional values per revolution
  524288
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
Motor nominal current
3.5 A
Type of winding switch
Star inside
Storage temperature
-20 °C ... 70 °C
Degree of protection
IP40
Stall torque
6.3 Nm
Permissible radial shaft load
1110 N
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Certificate issuing authority
UL E342973
Max. mechanical speed
13000 1/min
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position sensor
Absolute encoder, multi-turn
Nominal rotary speed
2700 1/min
Continuous stall current
4.4 A
Rotor position sensor resolution
19 bit
Winding inductance phase-phase
32.4 mH
Rating class according to EN 60034-1
S1
Certification
RCM compliance mark c UL us - Recognized (OL)
Permissible axial shaft load
200 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Electrical connection for input 1, connection pattern
00995913
Mounting position
Any
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Balancing quality
G 2.5
Electrical connection 1, number of pins/wires
15
Number of pole pairs
5
Standstill torque constant
1.67 Nm/A
Thermal resistance
0.6 K/W
Type code
EMMT-AS
Motor constants
1.45 Nm/A
Motor nominal power
1450 W
Peak current
13.7 A
Relative air humidity
0 - 90 %
Total output inertia moment
3.15 kgcm²
MTTF, subcomponent
190 years, rotor position sensor
Product weight
5500 g
Electrical connection 1, connection type
Hybrid plug
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Electric time constant
14.5 ms
Thermal time constant
74 min
Rotor position sensor interface
EnDat® 22
Nominal operating voltage DC
565 V
Voltage constant, phase-to-phase
101 mVmin
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Thermal class according to EN 60034-1
F
Peak torque
13.7 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Conforms to standard
IEC 60034
Ambient temperature
-15 °C ... 40 °C
Nominal torque
5.1 Nm
Interface code, motor out
100A

5255521 Related Documents