5255519 Festo Servo Motors

Product Details

• Stall torque
  6.3 Nm
• Electrical connection for input 1, connection pattern
  00995913
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Rotor position encoder for DC operating voltage
  5 V
• Standstill torque constant
  1.67 Nm/A
• Thermal resistance
  0.6 K/W
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
• Motor constants
  1.45 Nm/A
• Motor nominal current
  3.5 A
• Type of winding switch
  Star inside
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Ambient temperature
  -15 °C ... 40 °C
• Electrical connection 1, connection type
  Hybrid plug
• Mounting position
  Any
• Contamination level
  2
• Balancing quality
  G 2.5
• Electrical connection 1, number of pins/wires
  15
• Number of pole pairs
  5
• Electric time constant
  14.5 ms
• Rotor position encoder for absolutely detectable revolutions
  1
Thermal time constant
74 min
Rotor position sensor interface
EnDat® 22
Nominal rotary speed
2700 1/min
Nominal operating voltage DC
565 V
Phase-phase winding resistance
3.35 Ohm
Peak current
13.7 A
Storage temperature
-20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Permissible axial shaft load
200 N
MTTFd, subcomponent
380 years, rotor position sensor
Electrical connection 1, connection technology
M23x1
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Motor type as per EN 60034-7
IM B5 IM V3
Max. winding temperature
155 °C
Cross inductivity Lq (phase)
24.3 mH
Rotor position sensor
Absolute encoder, single-turn
Continuous stall current
4.4 A
Voltage constant, phase-to-phase
101 mVmin
Degree of protection
IP40
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Detent torque
< 1.0% of peak torque
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Measuring flange
300 x 300 x 20 mm, steel
Max. mechanical speed
13000 1/min
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Type code
EMMT-AS
Max. rotational speed
3970 1/min
Rotor position sensor resolution
19 bit
Corrosion resistance class (CRC)
0 - No corrosion stress
Thermal class according to EN 60034-1
F
Peak torque
13.7 Nm
MTTF, subcomponent
190 years, rotor position sensor
Rotor position sensor for manufacturer designation
ECI 1319
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Certificate issuing authority
UL E342973
Max. installation height
4000 m
Storage lifetime, under nominal conditions
20000 h
Winding longitudinal inductivity Ld (phase)
17.8 mH
Rotor position encoder system accuracy angle measurement
-65 arcsec ... 65 arcsec
Rotor position encoder for positional values per revolution
524288
Rotor position sensor measuring principle
Inductive
Motor nominal power
1450 W
Winding inductance phase-phase
32.4 mH
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Total output inertia moment
3.15 kgcm²
Permissible radial shaft load
1110 N
Interface code, motor out
100A
Nominal torque
5.1 Nm
Product weight
5500 g
Conforms to standard
IEC 60034

5255519 Related Documents