5255446 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Mounting position
  Any
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Motor type as per EN 60034-7
  IM B5 IM V3
• Number of pole pairs
  5
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
• Motor nominal power
  910 W
• Phase-phase winding resistance
  2.69 Ohm
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Thermal class according to EN 60034-1
  F
• Ambient temperature
  -15 °C ... 40 °C
• MTTFd, subcomponent
  380 years, rotor position sensor
• Electrical connection for input 1, connection pattern
  00995913
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Measuring flange
  250 x 250 x 15 mm, steel
• Balancing quality
  G 2.5
• Rotor position encoder for DC operating voltage
  5 V
• Cross inductivity Lq (phase)
  9.45 mH
• Rotor position encoder for absolutely detectable revolutions
  4096
Type code
EMMT-AS
Rotor position sensor measuring principle
Inductive
Nominal rotary speed
3000 1/min
Motor constants
0.82 Nm/A
Nominal operating voltage DC
565 V
Peak current
17.5 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Relative air humidity
0 - 90 %
Total output inertia moment
2.21 kgcm²
MTTF, subcomponent
190 years, rotor position sensor
Permissible radial shaft load
620 N
Interface code, motor out
80P
Detent torque
< 1.0% of peak torque
Contamination level
2
Max. winding temperature
155 °C
Max. mechanical speed
14000 1/min
Winding longitudinal inductivity Ld (phase)
7.5 mH
Thermal resistance
0.68 K/W
Thermal time constant
48 min
Voltage constant, phase-to-phase
56 mVmin
Certification
RCM compliance mark c UL us - Recognized (OL)
Product weight
3290 g
Electrical connection 1, connection technology
M23x1
Rotor position sensor for manufacturer designation
EQI 1131
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Electrical connection 1, number of pins/wires
15
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder for positional values per revolution
524288
Rotor position sensor
Absolute encoder, multi-turn
Max. rotational speed
7100 1/min
Rotor position sensor resolution
19 bit
Winding inductance phase-phase
12.6 mH
Rating class according to EN 60034-1
S1
Degree of protection
IP40
Stall torque
3.5 Nm
Peak torque
9.9 Nm
Conforms to standard
IEC 60034
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Certificate issuing authority
UL E342973
Max. installation height
4000 m
Electric time constant
7 ms
Standstill torque constant
0.93 Nm/A
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position sensor interface
EnDat® 22
Continuous stall current
4.3 A
Motor nominal current
3.5 A
Type of winding switch
Star inside
Storage temperature
-20 °C ... 70 °C
Nominal torque
2.9 Nm
Permissible axial shaft load
120 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Related documents 5255446 Specs