5255443 Festo Servo Motors
Part#:5255443
Manufacturer:Festo
Alt. Part#:EMMT-AS-80-L-LS-RSB
Product Lifecycle:Active
Get a quick Quote!
servo motor EMMT-AS-80-L-LS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
About the manufacturer: Festo is one of the manufacturers that offers Servo Motors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 5255443 Festo price in the box on the right side or send a quick quote.
Product Details
- Detent torque < 1.0% of peak torque
- Mounting position Any
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Measuring flange 250 x 250 x 15 mm, steel
- Brake airflow 0.45 A
- Brake coil inductivity 900 mH
- Electric time constant 6.9 ms
- Winding longitudinal inductivity Ld (phase) 3.1 mH
- Electrical connection 1, connection type Hybrid plug
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Motor type as per EN 60034-7 IM B5 IM V3
- Balancing quality G 2.5
- Brake current consumption 0.63 A
- Number of pole pairs 5
- Brake separation time ≤ 45 ms
- Rotor position encoder for absolutely detectable revolutions 1
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Continuous stall current 6.7 A
- Phase-phase winding resistance 1.13 Ohm
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Electrical connection for input 1, connection pattern 00995913
- Rotor position sensor for manufacturer designation ECI 1118
- Contamination level 2
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Electrical connection 1, number of pins/wires 15
- Max. brake no-load speed 10000 1/min
- Brake stopping current 0.45 A
- Brake closing time ≤ 30 ms
- Max. brake friction work 12000 J
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 48 min
- Type code EMMT-AS
- Brake power consumption 15 W
- Rotor position sensor resolution 18 bit
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Ambient temperature -15 °C ... 40 °C
- Total output inertia moment 2.72 kgcm²
- Stall torque 3.5 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Interface code, motor out 80P
- Conforms to standard IEC 60034
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Certificate issuing authority UL E342973
- Rotor position encoder for DC operating voltage 5 V
- Brake coil resistance 38.4 Ohm
- DC brake response delay ≤ 4 ms
- Standstill torque constant 0.6 Nm/A
- Rotor position sensor Absolute encoder, single-turn
- Max. rotational speed 6400 1/min
- Motor constants 0.53 Nm/A
- Motor nominal current 5.5 A
- Peak current 27.3 A
- Relative air humidity 0 - 90 %
- Certification RCM compliance mark c UL us - Recognized (OL)
- Peak torque 9.9 Nm
- Product weight 4120 g
- Max. winding temperature 155 °C
- Max. installation height 4000 m
- Max. mechanical speed 14000 1/min
- Storage lifetime, under nominal conditions 20000 h
- Cross inductivity Lq (phase) 3.9 mH
- Thermal resistance 0.68 K/W
- Rotor position sensor interface EnDat® 22
- Nominal rotary speed 3000 1/min
- Nominal operating voltage DC 325 V
- Type of winding switch Star inside
- Rating class according to EN 60034-1 S1
- Storage temperature -20 °C ... 70 °C
- Thermal class according to EN 60034-1 F
- Brake holding torque 7 Nm
- Nominal torque 2.9 Nm
- Permissible radial shaft load 620 N
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Rotor position encoder for positional values per revolution 262144
- Rotor position sensor measuring principle Inductive
- Brake DC operating voltage 24 V
- Motor nominal power 910 W
- Winding inductance phase-phase 5.2 mH
- Voltage constant, phase-to-phase 36 mVmin
- Degree of protection IP40
- Brake mass moment of inertia 0.459 kgcm²
- Permissible axial shaft load 120 N
- MTTFd, subcomponent 380 years, rotor position sensor
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 5255443 Specs
Manufacturer warranty
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
What can I help you find today?
