5255441 Festo Servo Motors
Part#:5255441
Alt. Part#:EMMT-AS-80-L-LS-RS
Manufacturer:Festo
Category:Servo Motors
Product Lifecycle:Active
Product description
servo motor EMMT-AS-80-L-LS-RS Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Stor
Product Details
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Electrical connection for input 1, connection pattern 00995913
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Motor type as per EN 60034-7 IM B5 IM V3
- Number of pole pairs 5
- Winding longitudinal inductivity Ld (phase) 3.1 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position encoder for positional values per revolution 262144
- Rotor position sensor measuring principle Inductive
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Nominal rotary speed 3000 1/min
- Motor nominal power 910 W
- Motor nominal current 5.5 A
- Electrical connection 1, connection type Hybrid plug
- Rotor position sensor for manufacturer designation ECI 1118
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Certificate issuing authority UL E342973
- Rotor position encoder for DC operating voltage 5 V
- Cross inductivity Lq (phase) 3.9 mH
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Balancing quality G 2.5
- Max. winding temperature 155 °C
- Max. mechanical speed 14000 1/min
- Rotor position encoder for absolutely detectable revolutions 1
- Thermal resistance 0.68 K/W
- Type code EMMT-AS
- Rotor position sensor Absolute encoder, single-turn
- Nominal operating voltage DC 325 V
- Continuous stall current 6.7 A
- Phase-phase winding resistance 1.13 Ohm
- Relative air humidity 0 - 90 %
- Certification RCM compliance mark c UL us - Recognized (OL)
- Stall torque 3.5 Nm
- Product weight 3290 g
- Detent torque < 1.0% of peak torque
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Measuring flange 250 x 250 x 15 mm, steel
- Max. installation height 4000 m
- Storage lifetime, under nominal conditions 20000 h
- Standstill torque constant 0.6 Nm/A
- Voltage constant, phase-to-phase 36 mVmin
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Thermal class according to EN 60034-1 F
- Peak torque 9.9 Nm
- Permissible radial shaft load 620 N
- MTTFd, subcomponent 380 years, rotor position sensor
- Conforms to standard IEC 60034
- Electrical connection 1, connection technology M23x1
- Mounting position Any
- Contamination level 2
- Electrical connection 1, number of pins/wires 15
- Electric time constant 6.9 ms
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal time constant 48 min
- Rotor position sensor interface EnDat® 22
- Max. rotational speed 6400 1/min
- Motor constants 0.53 Nm/A
- Rotor position sensor resolution 18 bit
- Type of winding switch Star inside
- Rating class according to EN 60034-1 S1
- Degree of protection IP40
- Nominal torque 2.9 Nm
- Permissible axial shaft load 120 N
- Winding inductance phase-phase 5.2 mH
- Peak current 27.3 A
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Storage temperature -20 °C ... 70 °C
- Ambient temperature -15 °C ... 40 °C
- Total output inertia moment 2.21 kgcm²
- MTTF, subcomponent 190 years, rotor position sensor
- Interface code, motor out 80P
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
5255441 Related Documents
Manufacturer warranty
5255441 Festo
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
About the manufacturer
Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
servo motor EMMT-AS-80-L-LS-RS Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Stor
What can I help you find today?
