5255439 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Measuring flange
  250 x 250 x 15 mm, steel
• Electrical connection 1, number of pins/wires
  15
• Max. winding temperature
  155 °C
• Number of pole pairs
  5
• Max. brake friction work
  8200 J
• Winding longitudinal inductivity Ld (phase)
  19.4 mH
• Thermal resistance
  0.78 K/W
• Rotor position sensor measuring principle
  Inductive
• Nominal rotary speed
  3000 1/min
• Detent torque
  < 1.0% of peak torque
• Rotor position sensor for manufacturer designation
  ECI 1118
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Balancing quality
  G 2.5
• Max. brake no-load speed
  10000 1/min
• Brake current consumption
  0.5 A
• Cross inductivity Lq (phase)
  23.8 mH
• Rotor position encoder for absolutely detectable revolutions
  1
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Brake DC operating voltage
24 V
Motor constants
1 Nm/A
Rotor position sensor resolution
18 bit
Peak current
9 A
Voltage constant, phase-to-phase
70.7 mVmin
Thermal class according to EN 60034-1
F
Brake mass moment of inertia
0.249 kgcm²
MTTFd, subcomponent
380 years, rotor position sensor
Conforms to standard
IEC 60034
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Brake airflow
0.37 A
Brake coil inductivity
1000 mH
Brake stopping current
0.37 A
Brake separation time
≤ 55 ms
Standstill torque constant
1.17 Nm/A
Rotor position encoder for positional values per revolution
262144
Continuous stall current
2.6 A
Motor nominal current
2.2 A
Rating class according to EN 60034-1
S1
Degree of protection
IP40
Certification
RCM compliance mark c UL us - Recognized (OL)
Nominal torque
2.2 Nm
Product weight
3360 g
Electrical connection for input 1, connection pattern
00995913
Contamination level
2
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Brake coil resistance
48 Ohm
Storage lifetime, under nominal conditions
20000 h
DC brake response delay
≤ 3 ms
Electric time constant
6.4 ms
Type code
EMMT-AS
Rotor position sensor interface
EnDat® 22
Max. rotational speed
5650 1/min
Motor nominal power
690 W
Phase-phase winding resistance
7.43 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Total output inertia moment
2.07 kgcm²
Peak torque
6.4 Nm
Permissible radial shaft load
620 N
Electrical connection 1, connection technology
M23x1
Mounting position
Any
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Certificate issuing authority
UL E342973
Rotor position encoder for DC operating voltage
5 V
Max. mechanical speed
14000 1/min
Brake closing time
≤ 15 ms
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal time constant
45 min
Rotor position sensor
Absolute encoder, single-turn
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Brake power consumption
12 W
Winding inductance phase-phase
31.8 mH
Corrosion resistance class (CRC)
0 - No corrosion stress
Storage temperature
-20 °C ... 70 °C
Stall torque
2.6 Nm
MTTF, subcomponent
190 years, rotor position sensor
Interface code, motor out
80P
Nominal operating voltage DC
565 V
Type of winding switch
Star inside
Relative air humidity
0 - 90 %
Ambient temperature
-15 °C ... 40 °C
Brake holding torque
4.5 Nm
Permissible axial shaft load
120 N
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Related documents 5255439 Specs