5255438 Festo Servo Motors

Product Details

• Detent torque
  < 1.0% of peak torque
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Measuring flange
  250 x 250 x 15 mm, steel
• Max. installation height
  4000 m
• Rotor position encoder for DC operating voltage range
  3.6 V ... 14 V
• Thermal time constant
  45 min
• Electrical connection 1, connection type
  Hybrid plug
• MTTFd, subcomponent
  380 years, rotor position sensor
• Electrical connection for input 1, connection pattern
  00995913
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Contamination level
  2
• Motor type as per EN 60034-7
  IM B5 IM V3
• Max. winding temperature
  155 °C
• Electric time constant
  6.4 ms
• Cross inductivity Lq (phase)
  23.8 mH
• Rotor position encoder for absolutely detectable revolutions
  4096
• Rotor position sensor measuring principle
  Inductive
• Continuous stall current
  2.6 A
• Phase-phase winding resistance
  7.43 Ohm
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
Ambient temperature
-15 °C ... 40 °C
Peak torque
6.4 Nm
Rotor position sensor for manufacturer designation
EQI 1131
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Rotor position encoder for DC operating voltage
5 V
Storage lifetime, under nominal conditions
20000 h
Standstill torque constant
1.17 Nm/A
Type code
EMMT-AS
Rotor position sensor interface
EnDat® 22
Motor nominal power
690 W
Voltage constant, phase-to-phase
70.7 mVmin
Certification
RCM compliance mark c UL us - Recognized (OL)
Nominal torque
2.2 Nm
Interface code, motor out
80P
Electrical connection 1, connection technology
M23x1
Mounting position
Any
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Balancing quality
G 2.5
Max. mechanical speed
14000 1/min
Winding longitudinal inductivity Ld (phase)
19.4 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position encoder for positional values per revolution
524288
Max. rotational speed
5650 1/min
Nominal operating voltage DC
565 V
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Thermal class according to EN 60034-1
F
Stall torque
2.6 Nm
Product weight
2640 g
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Electrical connection 1, number of pins/wires
15
Number of pole pairs
5
Thermal resistance
0.78 K/W
Rotor position sensor
Absolute encoder, multi-turn
Nominal rotary speed
3000 1/min
Motor constants
1 Nm/A
Motor nominal current
2.2 A
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Total output inertia moment
1.77 kgcm²
Permissible axial shaft load
120 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Rotor position sensor resolution
19 bit
Winding inductance phase-phase
31.8 mH
Peak current
9 A
Storage temperature
-20 °C ... 70 °C
Relative air humidity
0 - 90 %
Permissible radial shaft load
620 N
MTTF, subcomponent
190 years, rotor position sensor
Conforms to standard
IEC 60034

5255438 Related Documents