5255437 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Max. winding temperature
  155 °C
• Storage lifetime, under nominal conditions
  20000 h
• Standstill torque constant
  1.17 Nm/A
• Rotor position sensor
  Absolute encoder, single-turn
• Nominal operating voltage DC
  565 V
• Motor nominal current
  2.2 A
• Voltage constant, phase-to-phase
  70.7 mVmin
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Ambient temperature
  -15 °C ... 40 °C
• Nominal torque
  2.2 Nm
• Detent torque
  < 1.0% of peak torque
• Mounting position
  Any
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Electrical connection 1, number of pins/wires
  15
• Number of pole pairs
  5
• Rotor position encoder for DC operating voltage range
  3.6 V ... 14 V
• Thermal time constant
  45 min
Rotor position sensor measuring principle
Inductive
Motor constants
1 Nm/A
Phase-phase winding resistance
7.43 Ohm
Peak current
9 A
Degree of protection
IP40
Total output inertia moment
1.77 kgcm²
Permissible axial shaft load
120 N
MTTF, subcomponent
190 years, rotor position sensor
Conforms to standard
IEC 60034
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Electric time constant
6.4 ms
Thermal resistance
0.78 K/W
Nominal rotary speed
3000 1/min
Winding inductance phase-phase
31.8 mH
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Peak torque
6.4 Nm
Product weight
2640 g
Electrical connection 1, connection technology
M23x1
Rotor position sensor for manufacturer designation
ECI 1118
Contamination level
2
Balancing quality
G 2.5
Max. mechanical speed
14000 1/min
Cross inductivity Lq (phase)
23.8 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Type code
EMMT-AS
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Max. rotational speed
5650 1/min
Motor nominal power
690 W
Type of winding switch
Star inside
Electrical connection for input 1, connection pattern
00995913
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Measuring flange
250 x 250 x 15 mm, steel
Certificate issuing authority
UL E342973
Rotor position encoder for DC operating voltage
5 V
Winding longitudinal inductivity Ld (phase)
19.4 mH
Rotor position encoder for positional values per revolution
262144
Rotor position sensor interface
EnDat® 22
Continuous stall current
2.6 A
Rotor position sensor resolution
18 bit
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Certification
RCM compliance mark c UL us - Recognized (OL)
Stall torque
2.6 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Permissible radial shaft load
620 N
Interface code, motor out
80P

5255437 Related Documents