5255435 Festo Servo Motors
Part#:5255435
Alt. Part#:EMMT-AS-80-M-LS-RSB
Manufacturer:Festo
Category:Servo Motors
Product Lifecycle:Active
Product description
servo motor EMMT-AS-80-M-LS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
Product Details
- Thermal time constant 45 min
- Rotor position sensor for manufacturer designation ECI 1118
- Contamination level 2
- Certificate issuing authority UL E342973
- Max. brake no-load speed 10000 1/min
- Brake current consumption 0.5 A
- Electrical connection for input 1, connection pattern 00995913
- Information on max. installation height with 1,000 m and longer only with derating of -1.0% per 100 m
- Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
- Electrical connection 1, number of pins/wires 15
- Rotor position encoder for DC operating voltage 5 V
- Max. mechanical speed 14000 1/min
- Brake closing time ≤ 15 ms
- DC brake response delay ≤ 3 ms
- Rotor position encoder for absolutely detectable revolutions 1
- Rotor position sensor measuring principle Inductive
- Brake DC operating voltage 24 V
- Nominal operating voltage DC 325 V
- Winding inductance phase-phase 8.9 mH
- Rating class according to EN 60034-1 S1
- Certification RCM compliance mark c UL us - Recognized (OL)
- Permissible radial shaft load 620 N
- MTTFd, subcomponent 380 years, rotor position sensor
- Conforms to standard IEC 60034
- Electrical connection 1, connection type Hybrid plug
- Mounting position Any
- Note on ambient temperature Up to 80 °C with derating of -1.5% per degree Celsius
- Measuring flange 250 x 250 x 15 mm, steel
- Max. installation height 4000 m
- Storage lifetime, under nominal conditions 20000 h
- Standstill torque constant 0.62 Nm/A
- Degree of protection IP40
- Thermal class according to EN 60034-1 F
- Stall torque 2.6 Nm
- Interface code, motor out 80P
- Detent torque < 1.0% of peak torque
- Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
- Motor type as per EN 60034-7 IM B5 IM V3
- Brake airflow 0.37 A
- Brake coil resistance 48 Ohm
- Brake stopping current 0.37 A
- Brake separation time ≤ 55 ms
- Cross inductivity Lq (phase) 6.6 mH
- Rotor position encoder system accuracy angle measurement -120 arcsec ... 120 arcsec
- Rotor position sensor Absolute encoder, single-turn
- Temperature monitoring Digital motor temperature transmission via EnDat® 2.2
- Brake power consumption 12 W
- Motor nominal power 690 W
- Motor nominal current 4.1 A
- Peak current 17.1 A
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Storage temperature -20 °C ... 70 °C
- Total output inertia moment 2.07 kgcm²
- Nominal torque 2.2 Nm
- Product weight 3360 g
- Electrical connection 1, connection technology M23x1
- Concentricity, coaxiality, axial runout according to DIN SPEC 42955 N
- Note on degree of protection IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
- Balancing quality G 2.5
- Max. winding temperature 155 °C
- Brake coil inductivity 1000 mH
- Number of pole pairs 5
- Electric time constant 6.5 ms
- Winding longitudinal inductivity Ld (phase) 5.4 mH
- Rotor position encoder for positional values per revolution 262144
- Rotor position sensor interface EnDat® 22
- Max. rotational speed 6150 1/min
- Continuous stall current 4.9 A
- Rotor position sensor resolution 18 bit
- Type of winding switch Star inside
- Corrosion resistance class (CRC) 0 - No corrosion stress
- Relative air humidity 0 - 90 %
- Brake holding torque 4.5 Nm
- Peak torque 6.4 Nm
- MTTF, subcomponent 190 years, rotor position sensor
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Max. brake friction work 8200 J
- Rotor position encoder for DC operating voltage range 3.6 V ... 14 V
- Thermal resistance 0.78 K/W
- Type code EMMT-AS
- Nominal rotary speed 3000 1/min
- Motor constants 0.54 Nm/A
- Phase-phase winding resistance 2.04 Ohm
- Voltage constant, phase-to-phase 37.3 mVmin
- Ambient temperature -15 °C ... 40 °C
- Brake mass moment of inertia 0.249 kgcm²
- Permissible axial shaft load 120 N
- Switching cycles, holding brake 10 million idle actuations (without friction work!)
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
5255435 Related Documents
Manufacturer warranty
5255435 Festo
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
About the manufacturer
Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...
Recently viewed products
Relevant products
FAQ
Out if stock but available for backorder.
servo motor EMMT-AS-80-M-LS-RSB Ambient temperature: -15 - 40 °C, Note on ambient temperature: up to 80°C with derating -1.5%/°C, Max. installation height: 4000 m, Note on max. installation height: As of 1,000 m, only with derating of -1.0% per 100 m, Sto
What can I help you find today?
