5255433 Festo Servo Motors

Product Details

• Electrical connection 1, connection type
  Hybrid plug
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Measuring flange
  250 x 250 x 15 mm, steel
• Max. installation height
  4000 m
• Winding longitudinal inductivity Ld (phase)
  5.4 mH
• Rotor position encoder for DC operating voltage range
  3.6 V ... 14 V
• Rotor position sensor
  Absolute encoder, single-turn
• Temperature monitoring
  Digital motor temperature transmission via EnDat® 2.2
• Motor nominal power
  690 W
• Winding inductance phase-phase
  8.9 mH
• Voltage constant, phase-to-phase
  37.3 mVmin
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Degree of protection
  IP40
• Nominal torque
  2.2 Nm
• Permissible radial shaft load
  620 N
• Conforms to standard
  IEC 60034
• Electrical connection for input 1, connection pattern
  00995913
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Motor type as per EN 60034-7
  IM B5 IM V3
Max. winding temperature
155 °C
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for absolutely detectable revolutions
1
Thermal resistance
0.78 K/W
Continuous stall current
4.9 A
Total output inertia moment
1.77 kgcm²
Stall torque
2.6 Nm
Interface code, motor out
80P
Detent torque
< 1.0% of peak torque
Mounting position
Any
Contamination level
2
Balancing quality
G 2.5
Rotor position encoder for DC operating voltage
5 V
Electric time constant
6.5 ms
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Type code
EMMT-AS
Max. rotational speed
6150 1/min
Nominal rotary speed
3000 1/min
Phase-phase winding resistance
2.04 Ohm
Peak current
17.1 A
Relative air humidity
0 - 90 %
Certification
RCM compliance mark c UL us - Recognized (OL)
MTTF, subcomponent
190 years, rotor position sensor
MTTFd, subcomponent
380 years, rotor position sensor
Rotor position sensor for manufacturer designation
ECI 1118
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Electrical connection 1, number of pins/wires
15
Number of pole pairs
5
Standstill torque constant
0.62 Nm/A
Thermal time constant
45 min
Rotor position sensor measuring principle
Inductive
Nominal operating voltage DC
325 V
Rotor position sensor resolution
18 bit
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Peak torque
6.4 Nm
Product weight
2640 g
Electrical connection 1, connection technology
M23x1
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Certificate issuing authority
UL E342973
Max. mechanical speed
14000 1/min
Cross inductivity Lq (phase)
6.6 mH
Rotor position encoder for positional values per revolution
262144
Rotor position sensor interface
EnDat® 22
Motor constants
0.54 Nm/A
Motor nominal current
4.1 A
Type of winding switch
Star inside
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
-15 °C ... 40 °C
Thermal class according to EN 60034-1
F
Permissible axial shaft load
120 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

5255433 Related Documents