5255430 Festo Servo Motors

Product Details

• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Note on ambient temperature
  Up to 80 °C with derating of -1.5% per degree Celsius
• Max. winding temperature
  155 °C
• Electrical connection 1, number of pins/wires
  15
• Number of pole pairs
  5
• Standstill torque constant
  0.89 Nm/A
• Rotor position sensor interface
  EnDat® 22
• Max. rotational speed
  7440 1/min
• Nominal operating voltage DC
  565 V
• Winding inductance phase-phase
  39.8 mH
• Rating class according to EN 60034-1
  S1
• Relative air humidity
  0 - 90 %
• Nominal torque
  1.3 Nm
• Interface code, motor out
  80P
• Detent torque
  < 1.0% of peak torque
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Balancing quality
  G 2.5
• Max. mechanical speed
  14000 1/min
• Rotor position encoder for absolutely detectable revolutions
  4096
• Type code
  EMMT-AS
Continuous stall current
2 A
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
-15 °C ... 40 °C
MTTFd, subcomponent
380 years, rotor position sensor
Electrical connection 1, connection technology
M23x1
Electrical connection for input 1, connection pattern
00995913
Mounting position
Any
Information on max. installation height
with 1,000 m and longer only with derating of -1.0% per 100 m
Measuring flange
250 x 250 x 15 mm, steel
Max. installation height
4000 m
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position encoder for positional values per revolution
524288
Nominal rotary speed
3000 1/min
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Rotor position sensor resolution
19 bit
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Total output inertia moment
1.33 kgcm²
Permissible radial shaft load
620 N
Conforms to standard
IEC 60034
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Contamination level
2
Certificate issuing authority
UL E342973
Winding longitudinal inductivity Ld (phase)
25 mH
Thermal resistance
0.95 K/W
Rotor position sensor measuring principle
Inductive
Motor nominal power
408 W
Phase-phase winding resistance
12.4 Ohm
Thermal class according to EN 60034-1
F
Certification
RCM compliance mark c UL us - Recognized (OL)
Stall torque
1.46 Nm
MTTF, subcomponent
190 years, rotor position sensor
Product weight
2020 g
Electrical connection 1, connection type
Hybrid plug
Rotor position sensor for manufacturer designation
EQI 1131
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Motor type as per EN 60034-7
IM B5 IM V3
Rotor position encoder for DC operating voltage
5 V
Electric time constant
4.8 ms
Cross inductivity Lq (phase)
29.8 mH
Thermal time constant
42 min
Rotor position sensor
Absolute encoder, multi-turn
Motor constants
0.74 Nm/A
Motor nominal current
1.76 A
Peak current
5.4 A
Voltage constant, phase-to-phase
53.6 mVmin
Storage temperature
-20 °C ... 70 °C
Peak torque
2.8 Nm
Permissible axial shaft load
120 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

Related documents 5255430 Specs