5255426 Festo Servo Motors

Product Details

• Electrical connection 1, connection technology
  M23x1
• Electrical connection for input 1, connection pattern
  00995913
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Measuring flange
  250 x 250 x 15 mm, steel
• Winding longitudinal inductivity Ld (phase)
  10.2 mH
• Thermal time constant
  42 min
• Continuous stall current
  3.1 A
• Motor nominal current
  2.7 A
• Rotor position sensor resolution
  19 bit
• Voltage constant, phase-to-phase
  34.3 mVmin
• Rating class according to EN 60034-1
  S1
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Permissible radial shaft load
  620 N
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Vibration resistance
  Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
• Electrical connection 1, number of pins/wires
  15
• Max. winding temperature
  155 °C
• Number of pole pairs
  5
• Rotor position encoder system accuracy angle measurement
  -120 arcsec ... 120 arcsec
• Type code
  EMMT-AS
Total output inertia moment
1.33 kgcm²
Permissible axial shaft load
120 N
Interface code, motor out
80P
Electrical connection 1, connection type
Hybrid plug
Rotor position sensor for manufacturer designation
EQI 1131
Contamination level
2
Balancing quality
G 2.5
Max. mechanical speed
14000 1/min
Cross inductivity Lq (phase)
12.2 mH
Rotor position encoder for absolutely detectable revolutions
4096
Rotor position sensor
Absolute encoder, multi-turn
Nominal rotary speed
3000 1/min
Motor nominal power
408 W
Winding inductance phase-phase
16.3 mH
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Stall torque
1.46 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Mounting position
Any
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Certificate issuing authority
UL E342973
Rotor position encoder for DC operating voltage
5 V
Storage lifetime, under nominal conditions
20000 h
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal resistance
0.95 K/W
Rotor position sensor interface
EnDat® 22
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Motor constants
0.48 Nm/A
Phase-phase winding resistance
4.93 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Relative air humidity
0 - 90 %
Ambient temperature
-15 °C ... 40 °C
Nominal torque
1.3 Nm
Product weight
2020 g
Detent torque
< 1.0% of peak torque
Concentricity, coaxiality, axial runout according to DIN SPEC 42955
N
Note on degree of protection
IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
Motor type as per EN 60034-7
IM B5 IM V3
Max. installation height
4000 m
Electric time constant
4.9 ms
Standstill torque constant
0.57 Nm/A
Rotor position encoder for positional values per revolution
524288
Rotor position sensor measuring principle
Inductive
Max. rotational speed
6700 1/min
Nominal operating voltage DC
325 V
Type of winding switch
Star inside
Peak current
8.4 A
Storage temperature
-20 °C ... 70 °C
Thermal class according to EN 60034-1
F
Peak torque
2.8 Nm
MTTF, subcomponent
190 years, rotor position sensor
Conforms to standard
IEC 60034
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

5255426 Related Documents