161731 Festo Directional Control Valves

Name: 161731
Brand: Festo

Part#:161731

Manufacturer:Festo

Alt. Part#:MN1H-2-3/4-MS

Product Lifecycle:Active

Get a quick Quote!

solenoid valve MN1H-2-3/4-MS With manual override, without solenoid coil or socket. Solenoid coil and socket should be ordered separately. Design structure: Diaphragm valve, Type of actuation: electrical, Sealing principle: soft, Assembly position: Any, M

About the manufacturer: Festo is one of the manufacturers that offers Directional Control Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 161731 Festo price in the box on the right side or send a quick quote.

Product Details

Design
Diaphragm valve
Electrical connection
Form A Rectangular design
Coil characteristics
110 V AC: 50 Hz, initial power 5.0 VA, holding power 3.7 VA 24 V DC: 2.5 W
Medium pressure
0.5 bar ... 10 bar
Switching time off
180 ms
On switching time
120 ms
Degree of protection
IP65 With plug socket
Valve function
2/2, closed, monostable
Exhaust air function
Without flow control option
Symbol
00991399
Standard nominal flow rate
10000 l/min
Product weight
1100 g
Sealing principle
Soft
Type of mounting
Line installation
Fitting connection
G3/4
Reset method
Pneumatic spring
Temperature of medium
-10 °C ... 60 °C
Material number of screw
1.4301
Actuation type
Electrical
Nominal width
20 mm

Flow direction

Non-reversible

Type of control

Pilot-controlled

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Material of screws

High-alloy stainless steel

Type code

MN1H

Mounting position

Any

Manual override

Detenting via accessory Non-detenting

Medium

Filtered compressed air, 200 µm filter mesh

Ambient temperature

-10 °C ... 60 °C

Housing material

Brass

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

QOB210

Square D by Schneider Electric QOB210 is a Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 10A and accommodates a bolt-on connection type. This MCB is compatible with a voltage rating of 48Vdc and 120V/240V AC, supporting a cross-section of 14-8AWG for 1 cable Al/Cu. It is a 2 Pole device with a short circuit breaking rating of 10kA at 240Vac and 5kA at 48Vdc. The terminals are of the press plate type.

Schneider Electric

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

RSM-2RKM 40

RSM-2RKM 40 Turck - RSM-2RKM 40 Actuator and Sensor Tee, T-Splitter without Cable

Turck

53113530

53113530 - LAPP SKINTOP® COLD Strain Relief Cable Gland - M25 x 1.5

Lapp

RXM4AB2BD

Schneider Electric RXM4AB2BD is a miniature plug-in relay within the RXM sub-range, featuring contacts made from an Ag/Ni - Silver - Nickel alloy. This relay is designed with 4C/O - 4PDT (4 Pole Double Throw) contact type, and operates with a control voltage of 24 Vdc. It is rated for a current of 6 A at both 250Vac (AC-1) and 28Vac (DC-1). The RXM4AB2BD offers plug-in mounting mode and can operate within an ambient air temperature range of -40 to +55 °C. It has an IP40 degree of protection and a current consumption of 0.038 A. This model includes a visual position indicator through an LED, consumes 0.9 W of power, and boasts an electrical durability of 100,000 operations with a resistive load, alongside a mechanical durability of 10,000,000 operations at no load. Additionally, it features a Lockable Test Button (LTB) for latching.

Schneider Electric