1501331 Festo Servo Amplifiers

Product Details

• Nominal voltage, logic supply DC
  24 V
• Max. current consumption for logic supply without clamping brake
  0.2 A
• Digital output design
  Floating signal contact 3 safe, 2-channel semiconductor outputs
• Fuse protection (short circuit)
  no
• SFF safe failure fraction
  99.5 %
• Certificate issuing authority
  01/205/5165.02/19 German Technical Control Board (TÜV) Rheinland
• Relative air humidity
  5 - 90 % Non-condensing
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Ambient temperature
  0 °C ... 40 °C
• Mounting position
  Any
• Work range of logic input
  13 V ... 28.8 V
• Minimum cycle time
  2 ms
• Permissible range of logic voltage
  ± 20 %
• Number of digital logic inputs
  10
• Hardware fault tolerance
  1
• Safety integrity level (SIL)
  Safe stop 2 (SS2)/SIL 3 Safe torque off (STO)/SIL 3
• Certification
  German Technical Control Board (TÜV)
• Degree of protection
  IP20 In mounted state
• Type code
  CAMC
• Electrical connection
  Screw terminal Plug, straight
Max. nominal input current
0.015 A
Fuse protection for outputs
Short-circuit and cross-circuit monitoring
Nominal operating voltage DC
24 V
Current rating at 40°C
0.2 A
Digital outputs, switching logic
Semiconductor outputs: parameterizable PNP (plus-switching), 2-channel, equivalent/antivalent
Safety function
Safe brake control (SBC) Safe stop 2 (SS2)
Certified for safety functions to ISO 13849 (PL)
Product can be used in safety-related parts of control systems up to category 4, PL e
CE marking (see declaration of conformity)
As per EU EMC directive as per EU machinery directive
Wire ends
Cable end sleeve
Characteristics of logic input
4 safe 2-channel inputs, equivalent/antivalent switching, test pulses configurable, function configurable 6 safe, 1-channel inputs, test pulses configurable
Current rating per output
50 mA
Dimensions W x L x H
112.2 mm x 99.1 mm x 28.7 mm
PFH
9.5E-9
Certified for safety function to ISO 13849 and IEC 61508 (SIL)
Product can be used in safety-related parts of control systems up to SIL 3, high demand
Storage temperature
-25 °C ... 55 °C
Type of mounting
Plug-in module for CMMP-AS...-M3
Display
LED green/yellow/red
Debounce time at inputs
0.3 ms
Parameterization
Via SafetyTool
Nominal current, logic supply
0.15 A
Short-circuit protection
Yes, exception: C1/C2 contact
LED display (product-specific)
Fault (red) Safe state (yellow)
Proof test interval
20 y
Performance Level (PL)
Safe brake control (SBC)/category 4, performance level e Safe torque off (STO)/category 4, performance level e
Diagnostic coverage
97.5 %
Product weight
220 g
Connection cross section
0.25 mm² ... 0.5 mm²
Logic input specification
IEC 61131-2, type 3
Control elements
DIL switch
Max. current of digital logic outputs
50 mA

Related documents 1501331 Specs