1501328 Festo Servo Amplifiers

Product Details

• Type code
  CMMP-AS
• Output voltage range AC
  3x 0 - 360 V
• Pulse power of braking resistor
  8.5 kVA
• Nominal operating voltage AC
  400 V
• Nominal current per phase, effective
  10 A
• Peak current per phase, effective
  20 A
• Permissible voltage fluctuations
  +/- 10 %
• Degree of protection
  IP10 IP20
• Number of analog setpoint inputs
  2
• Work range of logic input
  8 V ... 30 V
• Characteristics of logic input
  Galvanically isolated Freely configurable
• Input encoder interface, function
  Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Line filter
  Integrated
• Braking resistor
  68 Ohm
• Max. current of digital logic outputs
  100 mA
• Controller nominal power
  6000 VA
• Mains frequency
  50 Hz ... 60 Hz
• Contamination level
  2
• Max. current consumption for logic supply without clamping brake
  1 A
Ambient temperature
0 °C ... 40 °C
Number of digital logic outputs 24 V DC
5
Number of digital logic inputs
10
Working range of monitor outputs
± 10 V
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Type of mounting
On sub-base Screwed tightly
Max. DC link voltage
560 V
Nominal current
11 A
Peak power
12000 VA
Storage temperature
-25 °C ... 70 °C
Product weight
3450 g
Process interfacing
I/O coupling For 256 positioning blocks
Resolution of monitor outputs
9 bit
Characteristics of monitor outputs
Short circuit-proof
Bus connection
Plug Sub-D
Output frequency
0 Hz ... 1000 Hz
Impedance of setpoint input
20 kOhm
Nominal output current
10 A
Nominal operating voltage phases
3-phase
Relative air humidity
0 - 90 %
Number of analog monitor outputs
2
Encoder interface output, characteristics
Resolution 16384 ppr
Characteristics of setpoint inputs
Differential inputs Configurable for current
Max. fieldbus transmission rate
1 Mbit/s
Display
Seven-segment display
Characteristics of digital logic outputs
Galvanically isolated Freely configurable in some cases
Max. peak current duration
5 s
Nominal voltage, logic supply DC
24 V
Parameterization interface
Parameterization and commissioning Ethernet
Permissible range of logic voltage
± 20 %
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Certification
RCM compliance mark c UL us - Listed (OL)
Communication profile
DS301/DSP402 FHPP
Work range of setpoint input
± 10 V
Encoder interface input, characteristics
3-phase encoder signals SINCOS
Fieldbus coupling
CANopen Profibus DP

Related documents 1501328 Specs