1501326 Festo Servo Amplifiers

Product Details

• Max. DC link voltage
  320 V
• Output frequency
  0 Hz ... 1000 Hz
• Impedance of setpoint input
  20 kOhm
• Display
  Seven-segment display
• Max. current of digital logic outputs
  100 mA
• Mains frequency
  50 Hz ... 60 Hz
• Permissible range of logic voltage
  ± 20 %
• Ambient temperature
  0 °C ... 40 °C
• Number of analog setpoint inputs
  2
• Work range of logic input
  8 V ... 30 V
• Characteristics of monitor outputs
  Short circuit-proof
• Fieldbus coupling
  CANopen Profibus DP
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Type code
  CMMP-AS
• Output voltage range AC
  3x 0 - 270 V
• Pulse power of braking resistor
  2.8 kVA
• Nominal output current
  5 A
• Nominal current
  4 A ... 6 A
• Peak power
  2000 VA
• Peak current per phase, effective
  10 A
Storage temperature
-25 °C ... 70 °C
Number of analog monitor outputs
2
Communication profile
DS301/DSP402 FHPP
Encoder interface output, characteristics
Resolution 16384 ppr
Characteristics of setpoint inputs
Differential inputs Configurable for current
Type of mounting
On sub-base Screwed tightly
Line filter
Integrated
Braking resistor
60 Ohm
Nominal operating voltage AC
230 V
Nominal current per phase, effective
5 A
Permissible voltage fluctuations
+/- 10 %
Certification
RCM compliance mark c UL us - Listed (OL)
Number of digital logic outputs 24 V DC
5
Encoder interface input, characteristics
3-phase encoder signals SINCOS
Characteristics of logic input
Galvanically isolated Freely configurable
Bus connection
Plug Sub-D
Characteristics of digital logic outputs
Galvanically isolated Freely configurable in some cases
Max. peak current duration
5 s
Controller nominal power
1000 VA
Parameterization interface
Parameterization and commissioning Ethernet
Contamination level
2
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Relative air humidity
0 - 90 %
Degree of protection
IP10 IP20
Number of digital logic inputs
10
Process interfacing
I/O coupling For 256 positioning blocks
Work range of setpoint input
± 10 V
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Input encoder interface, function
Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
Nominal voltage, logic supply DC
24 V
Nominal operating voltage phases
1-phase
Max. current consumption for logic supply without clamping brake
0.65 A
Product weight
2200 g
Working range of monitor outputs
± 10 V
Resolution of monitor outputs
9 bit
Max. fieldbus transmission rate
1 Mbit/s

Related documents 1501326 Specs