1501327 Festo Servo Amplifiers

Product Details

• Type code
  CMMP-AS
• Output voltage range AC
  3x 0 - 360 V
• Braking resistor
  68 Ohm
• Nominal voltage, logic supply DC
  24 V
• Parameterization interface
  Parameterization and commissioning Ethernet
• Peak power
  6000 VA
• Relative air humidity
  0 - 90 %
• Product weight
  3450 g
• Work range of logic input
  8 V ... 30 V
• Encoder interface input, characteristics
  3-phase encoder signals SINCOS
• Fieldbus coupling
  CANopen Profibus DP
• Line filter
  Integrated
• Pulse power of braking resistor
  8.5 kVA
• Max. current of digital logic outputs
  100 mA
• Nominal operating voltage AC
  400 V
• Max. current consumption for logic supply without clamping brake
  1 A
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Number of analog monitor outputs
  2
• Number of digital logic outputs 24 V DC
  5
• Process interfacing
  I/O coupling For 256 positioning blocks
Encoder interface output, characteristics
Resolution 16384 ppr
Bus connection
Plug Sub-D
Output frequency
0 Hz ... 1000 Hz
Max. peak current duration
5 s
Nominal current per phase, effective
5 A
Peak current per phase, effective
15 A
Permissible voltage fluctuations
+/- 10 %
Certification
RCM compliance mark c UL us - Listed (OL)
Communication profile
DS301/DSP402 FHPP
Working range of monitor outputs
± 10 V
Characteristics of monitor outputs
Short circuit-proof
Input encoder interface, function
Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
Max. fieldbus transmission rate
1 Mbit/s
Characteristics of digital logic outputs
Galvanically isolated Freely configurable in some cases
Max. DC link voltage
560 V
Nominal output current
5 A
Nominal current
5.5 A
Nominal operating voltage phases
3-phase
Contamination level
2
Degree of protection
IP10 IP20
Number of analog setpoint inputs
2
Work range of setpoint input
± 10 V
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Characteristics of setpoint inputs
Differential inputs Configurable for current
Type of mounting
On sub-base Screwed tightly
Display
Seven-segment display
Impedance of setpoint input
20 kOhm
Controller nominal power
3000 VA
Mains frequency
50 Hz ... 60 Hz
Permissible range of logic voltage
± 20 %
Storage temperature
-25 °C ... 70 °C
Ambient temperature
0 °C ... 40 °C
Number of digital logic inputs
10
Resolution of monitor outputs
9 bit
Characteristics of logic input
Galvanically isolated Freely configurable
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

1501327 Related Documents