1501330 Festo Servo Amplifiers

Name: 1501330
Brand: Festo

Part#:1501330

Manufacturer:Festo

Alt. Part#:CAMC-G-S1

Product Lifecycle:Active

Get a quick Quote!

safety module CAMC-G-S1 One plug-in module CAMC-DS-M1, CAMC-G-S1 or CAMC-G-S3 is required in order to operate the motor controller CMMP-AS-…-M3. Nominal DC voltage, logic power supply: 24 V, Nominal operating voltage DC: 24 V, Nominal current, logic suppl

About the manufacturer: Festo is one of the manufacturers that offers Servo Amplifiers that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 1501330 Festo price in the box on the right side or send a quick quote.

Product Details

Permissible range of logic voltage
± 20 %
Max. current consumption for logic supply without clamping brake
0.03 A
Digital outputs, switching logic
Contact closes at STO
Proof test interval
20 y
Certified for safety function to ISO 13849 and IEC 61508 (SIL)
Product can be used in safety-related parts of control systems up to SIL 3, high demand
Certification
German Technical Control Board (TÜV)
Storage temperature
-25 °C ... 55 °C
Type of mounting
Plug-in module for CMMP-AS...-M3
Connection cross section
0.25 mm² ... 0.5 mm²
Control elements
None
Max. nominal input current
0.03 A
Nominal voltage, logic supply DC
24 V
Short-circuit protection
no
Number of digital logic inputs
2
PFD
2.3E-5
Diagnostic coverage
97 %
Relative air humidity
5 - 95 % Non-condensing
Degree of protection
IP20 In mounted state
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Wire ends
Cable end sleeve

Logic input specification

Based on IEC 61131-2

Debounce time at inputs

0.3 ms

Nominal current, logic supply

0.02 A

Digital output design

Floating signal contact

Safety function

Safe torque off (STO)

Performance Level (PL)

Safe torque off (STO)/category 4, performance level e

Certificate issuing authority

01/205/5165.02/19 German Technical Control Board (TÜV) Rheinland

Ambient temperature

0 °C ... 40 °C

Mounting position

Any

Electrical connection

Screw terminal Plug, straight

Characteristics of logic input

Galvanically isolated

Current rating per output

200 mA

Nominal operating voltage DC

24 V

Current rating at 40°C

0.2 A

LED display (product-specific)

Normal mode (green)/STO (yellow)

PFH

1.27E-10

SFF safe failure fraction

99.2 %

Safety integrity level (SIL)

Safe torque off (STO)/SIL 3/SILCL 3

Fuse protection for outputs

Fuse protection (short circuit)

Dimensions W x L x H

112.6 mm x 87.2 mm x 28.3 mm

Hardware fault tolerance

Certified for safety functions to ISO 13849 (PL)

Product can be used in safety-related parts of control systems up to category 4, PL e

CE marking (see declaration of conformity)

As per EU EMC directive As per EU RoHS directive

Product weight

75 g

Type code

CAMC

Display

LED green/yellow

Work range of logic input

19.2 V ... 28.8 V

Max. current of digital logic outputs

200 mA

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

PKGTAB

Schneider Electric PKGTAB, Load center accessory, QO/Homeline, insulator kit, for ground bars

Schneider Electric