1501325 Festo Servo Amplifiers

Product Details

• Type code
  CMMP-AS
• Braking resistor
  60 Ohm
• Max. peak current duration
  5 s
• Controller nominal power
  500 VA
• Parameterization interface
  Parameterization and commissioning Ethernet
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Contamination level
  2
• Product weight
  2100 g
• Number of analog setpoint inputs
  2
• Work range of logic input
  8 V ... 30 V
• Resolution of monitor outputs
  9 bit
• Input encoder interface, function
  Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
• Line filter
  Integrated
• Characteristics of digital logic outputs
  Galvanically isolated Freely configurable in some cases
• Max. DC link voltage
  320 V
• Nominal voltage, logic supply DC
  24 V
• Nominal current per phase, effective
  2.5 A
• Peak current per phase, effective
  5 A
• Storage temperature
  -25 °C ... 70 °C
• Certification
  RCM compliance mark c UL us - Listed (OL)
Number of digital logic outputs 24 V DC
5
Working range of monitor outputs
± 10 V
Characteristics of setpoint inputs
Differential inputs Configurable for current
Max. fieldbus transmission rate
1 Mbit/s
Display
Seven-segment display
Impedance of setpoint input
20 kOhm
Nominal output current
2.5 A
Nominal current
2 A ... 3 A
Peak power
1000 VA
Permissible range of logic voltage
± 20 %
Degree of protection
IP10 IP20
Relative air humidity
0 - 90 %
Process interfacing
I/O coupling For 256 positioning blocks
Encoder interface output, characteristics
Resolution 16384 ppr
Characteristics of logic input
Galvanically isolated Freely configurable
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Output voltage range AC
3x 0 - 270 V
Nominal operating voltage AC
230 V
Nominal operating voltage phases
1-phase
Permissible voltage fluctuations
+/- 10 %
Number of analog monitor outputs
2
Work range of setpoint input
± 10 V
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Output frequency
0 Hz ... 1000 Hz
Max. current of digital logic outputs
100 mA
Pulse power of braking resistor
2.8 kVA
Mains frequency
50 Hz ... 60 Hz
Max. current consumption for logic supply without clamping brake
0.55 A
Ambient temperature
0 °C ... 40 °C
Number of digital logic inputs
10
Communication profile
DS301/DSP402 FHPP
Encoder interface input, characteristics
3-phase encoder signals SINCOS
Characteristics of monitor outputs
Short circuit-proof
Type of mounting
On sub-base Screwed tightly
Fieldbus coupling
CANopen Profibus DP
Bus connection
Plug Sub-D

1501325 Related Documents