Powermatic Associates Logo

SLC4P14-160P44 Banner Electronic Components

SLC4P14-160P44 on Powermatic Associates
Banner

Part#:SLC4P14-160P44

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Banner Engineering SLC4P14-160P44 is a safety light curtain designed for finger detection with a resolution of 14mm, featuring both emitter and receiver pairs. It is constructed with a polycarbonate (PC) housing and end caps, and it comes pre-wired with a 300mm pigtail that terminates with a 4-pin Euro-style M12 connector. This part offers a protective height of 160mm and is housed in yellow. It operates on a 24Vdc supply voltage and can function within an ambient air temperature range of -20 to +55°C. The SLC4P14-160P44 is IP65 rated, indicating protection against dust ingress and low-pressure water jets from any direction. It has a net width of 27mm, a net height of 174mm, and a net depth of 23mm. The light curtain features a 14mm beam spacing/pitch and provides a sensing distance ranging from 10cm to 2m. It emits infrared (IR) light with a wavelength of 860 nm and includes 2 x digital outputs (24Vdc; 300mA; sourcing; redundant OSSD solid-state outputs) for connectivity.

Product Details

  • Test Input
    No
  • Feature: ESD Safe
    No
  • Feature: End-to-End Sensing
    Yes
  • Housing Material
    Aluminum, Polycarbonate
  • Vibration
    10-55 Hz at 0.35 mm
  • Supply Current
    100
  • Trip/Latch Output
    Trip
  • OSSD Rating
    24 V dc; 0.3 A max.
  • Fault Output
    No
  • Auxiliary Output
    No
  • Reduced Resolution
    No
  • Electrical Safety Class
    III
  • System Type
    Emitter/Receiver Pair
  • Shock
    10g at 16ms (6000 cycles)
  • SIL Rating
    SIL3; CL3
  • Short Protection
    Yes
  • Resolution (mm)
    14
  • Recovery Time
    34 / 203
  • PL Rating
    Ple
  • Operating Voltage
    24 V dc +/- 15%
  • Number of Pins (Receiver/Emitter)
    4,4
  • IP Rating
    IP65
  • Housing Finish
    Clear Polycarbonate/Yellow Polyester
  • Fixed Blanking
    No
  • Overall Length (mm)
    173.2
  • Dimensions WxD (mm)
    26.7 x 22.1
  • External Monitoring Device
    No
  • Safety Level
    Type 4
  • Effective Aperture Angle
    Type 4 Per IEC 61496-2
  • Primary Housing Material
    Polycarbonate
  • Feature: Integral Muting
    No
  • Scan Code
    None
  • Operating Temperature
    -20 to +55 deg. C; RH 95%
  • Operating Distance (m)
    0.1 - 2
  • Connector Type
    M12 Pigtail (Black)
  • Defined Area Height (mm)
    160

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

SLC4P14-160P44 Related Documents

SLC4 160mm-1630951265712.stpSLC4 160mm-1630951265709.pdfSLC4 Safety Light Curtain -- Multilingual Datasheet-1630951265711.pdf

Similar products from: Banner Electronic Components

T18SP6R on Powermatic Associates

T18SP6R

Banner

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

4 in stock
FIC-M12M4 on Powermatic Associates

FIC-M12M4

Banner

Banner Engineering FIC-M12M4 is a field-wireable connector designed for automation applications, featuring a 4-pin Euro-style M12 male connection type.

2 in stock
WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock
T18SN6R W/30 on Powermatic Associates

T18SN6R W/30

Banner

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featuring a through-beam system in an opposed mode configuration. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It comes pre-wired with a 30ft / 9m cable that terminates with bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. This model boasts an IP67, IP69K, and NEMA 6P degree of protection, ensuring durability in various environmental conditions. The T18SN6R W/30 has a cylindrical M18 threaded/barrel shape, includes 1 x digital output (NPN transistor), and offers a sensing distance of up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

1 in stock

Manufacturer warranty

SLC4P14-160P44 Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare SLC4P14-160P44 with other Electronic Components products

Test Input

Feature: ESD Safe

Feature: End-to-End Sensi...

Housing Material

Vibration

Supply Current

Trip/Latch Output

OSSD Rating

Fault Output

Auxiliary Output

Selected product

SLC4P14-160P44
Backordered
SLC4P14-160P44
Banner

Banner Engineering SLC4P14-160P44 is a safety light curtain designed for finger detection with a res...

Test InputNo

Feature: ESD SafeNo

Feature: End-to-End SensingYes

Housing MaterialAluminum, Polycarbonate

Vibration10-55 Hz at 0.35 mm

Supply Current100

Trip/Latch OutputTrip

OSSD Rating24 V dc; 0.3 A max.

Fault OutputNo

Auxiliary OutputNo

T18SP6R
4 in stock
T18SP6R
Banner

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications,...

Test Input-

Feature: ESD Safe-

Feature: End-to-End Sensing-

Housing Material-

Vibration-

Supply Current-

Trip/Latch Output-

OSSD Rating-

Fault Output-

Auxiliary Output-

T18SN6R W/30
1 in stock
T18SN6R W/30
Banner

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featu...

Test Input-

Feature: ESD Safe-

Feature: End-to-End Sensing-

Housing Material-

Vibration-

Supply Current-

Trip/Latch Output-

OSSD Rating-

Fault Output-

Auxiliary Output-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

SLC4E24-160P4 on Powermatic Associates

SLC4E24-160P4

Verified stock: 0

Banner Engineering SLC4E24-160P4 is a safety light curtain designed for hand detection with a protective height of 160mm and a resolution of 24mm. It features a polycarbonate housing and end cap in yellow, ensuring visibility. This part is pre-wired with a 300mm pigtail that terminates with a 4-pin Euro-style M12 connector for easy installation. It operates on a 24Vdc supply voltage and can function within an ambient air temperature range of -20 to +55°C. The SLC4E24-160P4 offers a degree of protection rated at IP65, making it suitable for various industrial environments. It has a net width of 27mm, a height of 174mm, and a depth of 23mm. The light curtain emits infrared light with a wavelength of 860nm and has a sensing distance ranging from 10cm to 2m. It is equipped with 2 digital outputs (24Vdc; 300mA; sourcing; redundant OSSD solid-state outputs) and features a 24mm beam spacing/pitch.

Banner

SLC4E14-320P4 on Powermatic Associates

SLC4E14-320P4

Verified stock: 0

Banner Engineering SLC4E14-320P4 is a safety light curtain designed for finger detection with a resolution of 14mm, featuring a protective height of 320mm and 14mm beam spacing/pitch. It is constructed with a polycarbonate (PC) housing and end cap, and comes pre-wired with a 300mm pigtail terminated with a 4-pin Euro-style M12 connector. This part operates on a 24Vdc supply voltage and can function within an ambient air temperature range of -20 to +55°C. It offers a degree of protection rated at IP65 and has dimensions of 27mm in width, 333mm in height, and 23mm in depth. The SLC4E14-320P4 is equipped with 2 x digital outputs (24Vdc; 300mA; sourcing; redundant OSSD solid-state outputs) and has a sensing distance ranging from 10cm to 2m. The light emitted is in the infrared (IR) spectrum with a wavelength of 860 nm, and the housing is colored yellow.

Banner

FAQ

Out if stock but available for backorder.

Banner Engineering SLC4P14-160P44 is a safety light curtain designed for finger detection with a resolution of 14mm, featuring both emitter and receiver pairs. It is constructed with a polycarbonate (PC) housing and end caps, and it comes pre-wired with a 300mm pigtail that terminates with a 4-pin Euro-style M12 connector. This part offers a protective height of 160mm and is housed in yellow. It operates on a 24Vdc supply voltage and can function within an ambient air temperature range of -20 to +55°C. The SLC4P14-160P44 is IP65 rated, indicating protection against dust ingress and low-pressure water jets from any direction. It has a net width of 27mm, a net height of 174mm, and a net depth of 23mm. The light curtain features a 14mm beam spacing/pitch and provides a sensing distance ranging from 10cm to 2m. It emits infrared (IR) light with a wavelength of 860 nm and includes 2 x digital outputs (24Vdc; 300mA; sourcing; redundant OSSD solid-state outputs) for connectivity.

Similar products from: Electronic Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock