LTF24IC2LD W/30 Banner Electronic Components

Product Details

• SSI
  No
• Profibus
  No
• Wireless
  No
• RS-232
  No
• Common Ethernet Protocol
  No
• IO Link
  No
• Feature: Health/ Marginal Signal Output
  Yes
• Feature: Chemical Resistant
  No
• Feature: Remote Teach
  Yes
• Typical Laser Lifetime (Hours)
  60000
• Laser Control
  Yes
• Spot Size (@ Reference Distance)
  6.5 mm at 50 mm, 12.5 mm at 12000 mm, 35 mm at 24000 mm
• Analog Current Output Rating
  1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
• 1-wire Serial Interface
  No
• RS-485
  No
• RS-422
  No
• PROFINET
  No
• Feature: Pump-in/ Pump-out
  Yes
• Feature: Timing (Hold/Delay)
  Yes
• Max Off-state Leakage Current (µA)
  PNP <10µA at 30V, NPN <200µa at 30V
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Power/Current Consumption (exclusive of load)
<85 mA @ 24 V (< 2.1 W)
Max Ambient Light (Lux)
40000
Analog Linearity (mm)
+/- 10
Alarm Output (mA)
100
Minimum Window Size (mm)
10
Discrete Output Hysteresis (mm)
Automatically adjusted or manually settable from 2 to 23950 mm
Warm-up Time (minutes)
15
Minimum Response Time (ms)
1.5
Window Material
Acrylic
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
NEMA Rating
NEMA 6
Min Operating Temperature (°C)
-20
Max Operating Temperature (°C)
55
Storage Temperature (°C)
-30 to 65
IP Rating
IP67
Max Discrete (Switched) Output (mA)
100
Output Protection
Protected against continuous overload and short circuit
Discrete (Switched) Outputs
1 NPN/PNP Configurable
Output Saturation Voltage PNP Outputs
< 3V @ 100ma
Minimum Sensing Distance (mm)
50
Power Supply
12-30 V dc
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Output Saturation Voltage NPN Outputs
< 1.6V @ 100ma
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Temperature Effect (mm/°C)
0.25mm/C (typical)
Number of Pins
5
Adjustments
Push Button; Remote Teach
Delay at Power-up (ms)
2000
Sensing Beam Wavelength (nm)
660
Primary Housing Material
Zinc Alloy Die-Cast
Max Sensing Distance (mm)
24000
Analog Resolution/Discrete Repeatability
1
Quick Disconnect Type
No QD
Analog Output Configuration
4-20 mA
Connection
Flying Leads
Indicator
Display; LED(s)
Input/Output
Analog & Discrete
Laser Classification
Class 2
PC Configurable
No
Max Measurement Range
>20 m
Cable Length (m)
9
Housing Style
Rectangular
Sensing Mode (Detailed)
Time of Flight
Device Type
Sensor
Sensing Mode (General)
Proximity
Power
DC
Sensing Beam
Visible Red Laser

LTF24IC2LD W/30 Related Documents