LTF24IC2LD Banner Optical Sensors

Product Details

• Weight
  503.48712 g
• Country Of Origin
  US
• RS-422
  No
• IO Link
  No
• Feature: Timing (Hold/Delay)
  Yes
• 1-wire Serial Interface
  No
• SSI
  No
• Profibus
  No
• Wireless
  No
• RS-485
  No
• RS-232
  No
• PROFINET
  No
• Common Ethernet Protocol
  No
• Feature: Pump-in/ Pump-out
  Yes
• Feature: Health/ Marginal Signal Output
  Yes
• Feature: Chemical Resistant
  No
• Typical Laser Lifetime (Hours)
  60000
• Feature: Remote Teach
  Yes
• Power/Current Consumption (exclusive of load)
  <85 mA @ 24 V (< 2.1 W)
• Max Off-state Leakage Current (µA)
  PNP <10µA at 30V, NPN <200µa at 30V
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Max Ambient Light (Lux)
40000
Alarm Output (mA)
100
Laser Control
Yes
Minimum Window Size (mm)
10
Analog Linearity (mm)
+/- 10
Discrete Output Hysteresis (mm)
Automatically adjusted or manually settable from 2 to 23950 mm
Spot Size (@ Reference Distance)
6.5 mm at 50 mm, 12.5 mm at 12000 mm, 35 mm at 24000 mm
Minimum Response Time (ms)
1.5
Warm-up Time (minutes)
15
Window Material
Acrylic
Min Operating Temperature (°C)
-20
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Storage Temperature (°C)
-30 to 65
Max Operating Temperature (°C)
55
IP Rating
IP67
NEMA Rating
NEMA 6
Output Protection
Protected against continuous overload and short circuit
Discrete (Switched) Outputs
1 NPN/PNP Configurable
Max Discrete (Switched) Output (mA)
100
Analog Current Output Rating
1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
Output Saturation Voltage PNP Outputs
< 3V @ 100ma
Output Saturation Voltage NPN Outputs
< 1.6V @ 100ma
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Number of Pins
5
Temperature Effect (mm/°C)
0.25mm/C (typical)
Sensing Beam Wavelength (nm)
660
Adjustments
Push Button; Remote Teach
Delay at Power-up (ms)
2000
Power Supply
12-30 V dc
Minimum Sensing Distance (mm)
50
Indicator
Display; LED(s)
Quick Disconnect Type
No QD
Max Sensing Distance (mm)
24000
Analog Output Configuration
4-20 mA
Analog Resolution/Discrete Repeatability
1
Connection
Flying Leads
Input/Output
Analog & Discrete
Primary Housing Material
Zinc Alloy Die-Cast
Laser Classification
Class 2
Device Type
Sensor
Sensing Mode (General)
Proximity
Sensing Mode (Detailed)
Time of Flight
Sensing Beam
Visible Red Laser
Max Measurement Range
>20 m
PC Configurable
No
Housing Style
Rectangular
Cable Length (m)
2
Power
DC

LTF24IC2LD Related Documents