LTF24UC2LDQP Banner Optical Sensors

Product Details

• Weight
  408.2328 g
• Country Of Origin
  US
• Profibus
  No
• Wireless
  No
• RS-422
  No
• SSI
  No
• PROFINET
  No
• Common Ethernet Protocol
  No
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• 1-wire Serial Interface
  No
• RS-485
  No
• RS-232
  No
• IO Link
  No
• Feature: Health/ Marginal Signal Output
  Yes
• Feature: Pump-in/ Pump-out
  Yes
• Feature: Chemical Resistant
  No
• Feature: Timing (Hold/Delay)
  Yes
• Feature: Remote Teach
  Yes
• Typical Laser Lifetime (Hours)
  60000
• Max Off-state Leakage Current (µA)
  PNP <10µA at 30V, NPN <200µa at 30V
Power/Current Consumption (exclusive of load)
<85 mA @ 24 V (< 2.1 W)
Max Ambient Light (Lux)
40000
Alarm Output (mA)
100
Laser Control
Yes
Discrete Output Hysteresis (mm)
Automatically adjusted or manually settable from 2 to 23950 mm
Minimum Window Size (mm)
10
Analog Linearity (mm)
+/- 10
Spot Size (@ Reference Distance)
6.5 mm at 50 mm, 12.5 mm at 12000 mm, 35 mm at 24000 mm
Window Material
Acrylic
Warm-up Time (minutes)
15
Minimum Response Time (ms)
1.5
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Max Operating Temperature (°C)
55
Min Operating Temperature (°C)
-20
Storage Temperature (°C)
-30 to 65
NEMA Rating
NEMA 6
IP Rating
IP67
Output Protection
Protected against continuous overload and short circuit
Discrete (Switched) Outputs
1 NPN/PNP Configurable
Output Saturation Voltage NPN Outputs
< 1.6V @ 100ma
Analog Voltage Output Rating
2.5 kΩ min. load impedance
Max Discrete (Switched) Output (mA)
100
Output Saturation Voltage PNP Outputs
< 3V @ 100ma
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Number of Pins
5
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Sensing Beam Wavelength (nm)
660
Adjustments
Push Button; Remote Teach
Power Supply
12-30 V dc
Minimum Sensing Distance (mm)
50
Delay at Power-up (ms)
2000
Input/Output
Analog & Discrete
Temperature Effect (mm/°C)
0.25mm/C (typical)
Max Sensing Distance (mm)
24000
Laser Classification
Class 2
Connection
Pigtail QD
Analog Output Configuration
0-10 V dc
Analog Resolution/Discrete Repeatability
1
Quick Disconnect Type
M12 (Euro)
Indicator
Display; LED(s)
Primary Housing Material
Zinc Alloy Die-Cast
Device Type
Sensor
Housing Style
Rectangular
Sensing Mode (Detailed)
Time of Flight
Sensing Mode (General)
Proximity
PC Configurable
No
Cable Length (m)
0.15
Power
DC
Sensing Beam
Visible Red Laser
Max Measurement Range
>20 m

LTF24UC2LDQP Related Documents