LTF24UC2LD Banner Optical Sensors

Product Details

• Weight
  503.48712 g
• Country Of Origin
  US
• 1-wire Serial Interface
  No
• Profibus
  No
• RS-485
  No
• RS-232
  No
• Common Ethernet Protocol
  No
• Feature: Health/ Marginal Signal Output
  Yes
• PROFINET
  No
• Feature: Timing (Hold/Delay)
  Yes
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Max Ambient Light (Lux)
  40000
• Max Off-state Leakage Current (µA)
  PNP <10µA at 30V, NPN <200µa at 30V
• Laser Control
  Yes
• Minimum Window Size (mm)
  10
• Warm-up Time (minutes)
  15
• Storage Temperature (°C)
  -30 to 65
• Max Operating Temperature (°C)
  55
• Max Discrete (Switched) Output (mA)
  100
• Wireless
  No
SSI
No
RS-422
No
IO Link
No
Feature: Pump-in/ Pump-out
Yes
Feature: Chemical Resistant
No
Feature: Remote Teach
Yes
Power/Current Consumption (exclusive of load)
<85 mA @ 24 V (< 2.1 W)
Typical Laser Lifetime (Hours)
60000
Alarm Output (mA)
100
Discrete Output Hysteresis (mm)
Automatically adjusted or manually settable from 2 to 23950 mm
Analog Linearity (mm)
+/- 10
Minimum Response Time (ms)
1.5
Spot Size (@ Reference Distance)
6.5 mm at 50 mm, 12.5 mm at 12000 mm, 35 mm at 24000 mm
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Window Material
Acrylic
Min Operating Temperature (°C)
-20
NEMA Rating
NEMA 6
IP Rating
IP67
Output Protection
Protected against continuous overload and short circuit
Discrete (Switched) Outputs
1 NPN/PNP Configurable
Analog Voltage Output Rating
2.5 kΩ min. load impedance
Output Saturation Voltage PNP Outputs
< 3V @ 100ma
Output Saturation Voltage NPN Outputs
< 1.6V @ 100ma
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Number of Pins
5
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Temperature Effect (mm/°C)
0.25mm/C (typical)
Adjustments
Push Button; Remote Teach
Sensing Beam Wavelength (nm)
660
Delay at Power-up (ms)
2000
Power Supply
12-30 V dc
Minimum Sensing Distance (mm)
50
Max Sensing Distance (mm)
24000
Input/Output
Analog & Discrete
Quick Disconnect Type
No QD
Analog Resolution/Discrete Repeatability
1
Connection
Flying Leads
Analog Output Configuration
0-10 V dc
Indicator
Display; LED(s)
Laser Classification
Class 2
Primary Housing Material
Zinc Alloy Die-Cast
Device Type
Sensor
Sensing Mode (General)
Proximity
Max Measurement Range
>20 m
Housing Style
Rectangular
PC Configurable
No
Sensing Mode (Detailed)
Time of Flight
Cable Length (m)
2
Power
DC
Sensing Beam
Visible Red Laser

LTF24UC2LD Related Documents