787-1711 WAGO AC/DC Power Supplies

787-1711 on Powermatic Associates
WAGO

Part#:787-1711

Manufacturer:WAGO

Category:AC/DC Power Supplies

Product Lifecycle:Active

Product description

787-1711 WAGO - Switched-mode power supply; Eco; 1-phase; 12 VDC output voltage; 4 A output current; DC-OK LED

Product Details

  • Weight
    250.0000658 g
  • Country Of Origin
    China
  • HTS Code
    85044082900
  • Width
    1.575 inches, 40 millimeters
  • Weight
    250.000 grams
  • Strip Length
    0.28 inches, 7 millimeters
  • Package Type
    Box
  • Mounting Type
    DIN-35 Rail, Screw Mount
  • Height
    3.543 inches, 90 millimeters
  • Country of Origin
    China
  • Conductor Size
    12 american wire gauge, 2.5 millimeters

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of 787-1711 on Powermatic Associates is $58.12. Order now.


About the product

Wago 787-1711 is a power supply unit featuring an eco switch-mode AC/DC power supply unit (SMPS PSU) capable of series and parallel operation for two devices of the same type. It operates with a supply voltage range of 125-375Vdc and 90-264Vac, including 110Vac, 120Vac, 220Vac, 230Vac, and 240Vac. The unit is equipped with CAGE-CLAMP spring connections and has a rated current of 4A and a rated power of 48W. It is designed for an ambient air temperature range of -20°C to +60°C for operation and -25°C to +75°C for storage. The degree of protection is IP20, and it includes a control voltage (AC) with an F 2A / 250Vac internal fuse. Features include constant power in the overload range of 1.05 to 1.4 times the nominal output current, along with shutdown and automatic restart in the event of a short circuit, short-circuit protection, and open circuit protection. The unit's dimensions are H90mm x W40mm x D99mm, suitable for DIN-35 rail or wall mounting via screws. It supports a single-phase AC (1AC) or DC connection, with a response time of 10ms at 230Vac input. The product is part of the Eco series and is designed to be replaced by a 12Vdc (SELV) or 10-14Vdc (adjustable) model. Power dissipation/losses are noted with a 1.8A consumption at 100Vac, and the output error is within 1%. The coating material is designed to withstand 10-95% relative humidity without condensation.


This item can ship within 0 day!

Manufacturer warranty

787-1711 WAGO

$58.12

Your price can be lower.
Log in or Create account to check your discount

Stock:

0

Select Qty:

$58.12

$58.12 each

Worldwide Shipping and Delivery


Secure Payment Processing


Warranty


Responsive Customer Support

Got Questions? We've Got Answers!


Need more details?

Feel free to chat with us

Compare 787-1711 with other AC/DC Power Supplies products

Weight

Country Of Origin

HTS Code

Width

Strip Length

Package Type

Mounting Type

Height

Country of Origin

Conductor Size

Selected product

787-1711
Backordered
787-1711
WAGO

787-1711 WAGO - Switched-mode power supply; Eco; 1-phase; 12 VDC output voltage; 4 A output current;...

Weight250.0000658 g

Country Of OriginChina

HTS Code85044082900

Width1.575 inches, 40 millimeters

Strip Length0.28 inches, 7 millimeters

Package TypeBox

Mounting TypeDIN-35 Rail, Screw Mount

Height3.543 inches, 90 millimeters

Country of OriginChina

Conductor Size12 american wire gauge, 2.5 ...

ML15.051
1 in stock
ML15.051
Puls

PULS ML15.051 is a power supply unit (PSU) / converter designed for DIN rail mounting. It operates w...

Weight-

Country Of Origin-

HTS Code-

Width-

Strip Length-

Package Type-

Mounting Type-

Height-

Country of Origin-

Conductor Size-

CPS20.121
1 in stock
CPS20.121
Puls

PULS CPS20.121 is a DIN rail mounting power supply unit with an aluminium housing designed for a wid...

Weight-

Country Of Origin-

HTS Code-

Width-

Strip Length-

Package Type-

Mounting Type-

Height-

Country of Origin-

Conductor Size-

About the manufacturer

WAGO

Powermatic Associates is an authorized WAGO distributor, proud to offer a diverse range of high-quality and innovative industrial automation solutions. As a leading manufacturer, WAGO excels in designing and producing cutting-edge electrical interconnection, automation, and interface electronics technologies. Powermatic Associates leverages WAGO's expertise to provide customers with top-of-the-lin...

About the Product Category

AC/DC power supplies are power supplies that convert alternating current from the grid into direct current that is needed to power most electronics. AC/DC power supplies are integral components in systems that make the world go round.

AC/DC Power Supplies

Recently viewed products

Relevant products

FAQ

What is the price of 787-1711?
Purchase the 787-1711 from Powermatic Associates at the price of $58.12. Order today.

Out if stock but available for backorder.

787-1711 WAGO - Switched-mode power supply; Eco; 1-phase; 12 VDC output voltage; 4 A output current; DC-OK LED

Similar products from: AC/DC Power Supplies

This item can ship within 24h!

CP10.241-S2 on Powermatic Associates

CP10.241-S2

Verified stock: 4

PULS CP10.241-S2 is a DIN rail mounting power supply unit with an aluminium housing. It operates within an ambient air temperature range of -25 to +70°C and has a net width of 39 mm. The current consumption varies with input voltage, being 1.13A at 230Vac input, 2.15A at 120Vac input, 2.6A at 100Vac input, and 2.35A at 110Vdc input, with a peak inrush current of 11A at 230Vac input and 7A at 120Vac input. It offers an IP20 degree of protection and achieves an efficiency of 0.952 at 230Vac input and 0.936 at 120Vac input. The dimensions are W39mm x H124mm x D117mm. The start-up delay ranges from 240-300ms for 100-230Vac input, with a rise time of 30ms under nominal input and full constant current load without load capacitance, and 160ms with 10mF load capacitance. It features protection against output overvoltage, overload/short-circuit, and over-temperature, with automatic restart in case of over-temperature conditions. The unit supports series/parallel operation for increased output voltages or power, and 1+1 redundancy with a redundancy module. It is resistant to back-feeding loads up to 35V. Power dissipation/losses are 12.1W at 230Vac input and 16.4W at 120Vac input, with an output stage capacitance of 4400µF. Electrical durability varies with conditions, reaching up to 499,000 hours at 40°C and 12A output with 1AC 230Vac input. The ripple is 50mVpp (20Hz...20MHz; 50Ω). This AC/DC power supply unit offers a 20% power reserve and includes ATEX approval, DC-OK relay contact output, and push-in spring connections. The supply voltage ranges from 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with specific tolerances for overvoltage and shutdown voltages. The rated current is 12A at 48Vdc from -25 to +45°C, 10A at 24Vdc from +45 to +60°C, and 7.5A at 24Vdc at +70°C. It is suitable for single-phase (1AC) or DC networks, with a rated power of 288W at -25 to +45°C, 240W at -25 to +60°C, and 180W at +70°C, with linear derating between +60°C and +70°C. The output voltage is adjustable from 24Vdc to 28Vdc, with a 200mV turn-ON overshoot, and a hold time of 37ms at 120/230Vac input.

Puls

This item can ship within 24h!

QS10.121 on Powermatic Associates

QS10.121

Verified stock: 1

PULS QS10.121 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. The unit is equipped with a DC-OK relay contact output and offers a rated current of 15A at 12Vdc and 13.5A at 15Vdc, utilizing spring-clamp connections for connectivity. It supports a supply voltage range of 85Vac-264Vac for AC and 88Vdc-188Vdc for DC, with specific nominal values across a wide spectrum. The QS10.121, part of the Q-series, measures 60mm in width, 124mm in height, and 117mm in depth, housed in an aluminium casing. It is compatible with single-phase (1AC) or DC networks, delivering a rated power of 203W at 15V, 180W at 12V, and can momentarily supply up to 270W for 4 seconds. The output voltage is adjustable between 12Vdc and 15Vdc, featuring comprehensive protection functions including overvoltage and overload/short-circuit protection. The unit allows for series or parallel operation to increase output power and is designed to handle back-feeding loads without malfunctioning. Efficiency rates vary with input voltage, achieving up to 0.918 at 230Vac. It exhibits a peak current consumption of 10A, with a start-up delay between 340-800ms and a hold time of 32ms at nominal input conditions. Power dissipation stands at approximately 16.1W to 16.7W under full load conditions, and the electrical durability ranges significantly based on operating conditions, with up to 215000 hours at 25°C and 30A output with 1AC 230Vac input. The output stage capacitance is 7000µF, and ripple is maintained at 50mVpp across a 20Hz to 20MHz range.

Puls

This item can ship within 24h!

CPS20.121 on Powermatic Associates

CPS20.121

Verified stock: 1

PULS CPS20.121 is a DIN rail mounting power supply unit with an aluminium housing designed for a wide range of industrial applications. It operates within an ambient air temperature range of -25 to +70°C and supports a net width of 65 mm. The unit consumes 1.8A, 3.3A, and 4A under 230Vac, 120Vac, and 100Vac input conditions respectively, with a peak inrush current of 13A at both 230Vac and 120Vac inputs. It boasts an efficiency of up to 0.926, 0.914, and 0.909 under 230Vac, 120Vac, and 100Vac inputs respectively. The dimensions are W65mm x H124mm x D127mm. It features a start-up delay of 700-900ms and rise times of 72ms and 120ms under nominal input conditions. The CPS20.121 includes protection functions such as output overvoltage protection and overload/short-circuit protection, with the capability for series or parallel operation to increase output power. It is designed to handle back-feeding loads up to 16V without malfunctioning. Power dissipation/losses are calculated at 28.8 W, with an output stage capacitance of 5600 µF. Its electrical durability ranges from 50,000 to 492,000 hours, depending on operating conditions. The ripple is maintained at 100mVpp. This AC/DC power supply unit offers a 20% power reserve, is part of the C-series, and includes ATEX approval, DC-OK relay contact output, and screw-clamp connections. It accepts a supply voltage range of 85Vac-264Vac, with specific shutdown voltages under varying loads. The rated current is 30A at 12Vdc, with a rated power of 405W at 15Vdc and 360W at 12Vdc. The output voltage is adjustable between 12Vdc and 15Vdc, featuring a 200mV turn-ON overshoot and a hold time of 35ms.

Puls

What can I help you find today?

Recommended parts