PJP36080CU43ALV Schneider Electric Electronic Components

HDF36035

Schneider Electric

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 35A and offers thermal protection for overload and magnetic protection for short-circuit scenarios. This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It is designed for individual unit mount on plate with a Term. nut kit for fixed busbar connection on both line and load sides. The HDF36035 has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm, featuring an IP40 degree of protection. Its operating mode is manual toggle, with over-current protection settings fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 35 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

Manufacturer warranty

PJP36080CU43ALV Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare PJP36080CU43ALV with other Electronic Components products

Breaking Capacity

Electrical Connection

Certifications

Tightening Torque

Height

Depth

Continuous Current Rating

Module Type

Trip Unit Technology

Current Sensor Rating Ran...

Selected product

Backordered

PJP36080CU43ALV

Schneider Electric

Molded Case Circuit Breaker 600V 800A, Control Wire OFF end

Breaking Capacity100 kA 240 V AC 65 kA 480 V ...

Electrical ConnectionLugs line Terminal nut load

CertificationsCSA IEC UL Listed

Tightening Torque442.54 lbf.in (50 N.m) 0.15…...

Height12.86 in (326.64 mm)

Depth8.05 in (204.47 mm)

Continuous Current Rating100 %

Module TypeP-Frame

Trip Unit TechnologyElectronic, ammeter, Microlo...

Current Sensor Rating Range800 A

7 in stock

BJF36035

Schneider Electric

Square D by Schneider Electric BJF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPac...

Breaking Capacity100 kA 208Y/120 V AC 50/60 H...

Electrical Connection-

Certifications-

Tightening Torque-

Height-

Depth-

Continuous Current Rating-

Module Type-

Trip Unit TechnologyThermal-magnetic

Current Sensor Rating Range-

1 in stock

M9U31110

Schneider Electric

Schneider Electric M9U31110 is a Miniature Circuit Breaker (MCB) designed specifically for DC loads,...

Breaking Capacity10 kA Icu 220 V DC EN/IEC 60...

Electrical Connection-

Certifications-

Tightening Torque-

Height-

Depth-

Continuous Current Rating-

Module Type-

Trip Unit TechnologyThermal-magnetic

Current Sensor Rating Range-

About the manufacturer

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Relevant products

PJP36080U64AE1

Molded Case Circuit Breaker 600V 800A, Modbus Connection

Schneider Electric

PJP36120U31AAB

Molded Case Circuit Breaker 600V 1200A, Aux Switch

Schneider Electric

PJP36100CU64AE1

Molded Case Circuit Breaker 600V 1000A, Modbus Connection

Schneider Electric

PJP36120CU33A

MOLDED CASE CIRCUIT BREAKER 600V 1200A

Schneider Electric

PJP36080U33A

Schneider Electric - PJP36080U33A

Schneider Electric

FAQ

Out if stock but available for backorder.

Molded Case Circuit Breaker 600V 800A, Control Wire OFF end

Similar products from: Electronic Components

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

This item can ship within 24h!

FSD78-12-D

Verified stock: 151

Pan-Term® Single wire ferrule

Panduit

This item can ship within 24h!

09 14 001 3131

Verified stock: 14

Han® 100 A module, Single module, Female, Contacts: 1, Conductor cross-section: 10 ... 35 mm², Rated current: ‌100 A, Polycarbonate (PC), RAL 7032 (pebble grey)

Harting

This item can ship within 24h!

0690700000

Verified stock: 348

Wire-end ferrule, insulated, 10 mm, 8 mm, orange, 20 AWG, H0,5/14 OR

Weidmuller

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner

What can I help you find today?

Recommended parts

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

ZB5AK1243

Schneider Electric

Schneider Electric ZB5AK1243 is a round, illuminated head designed for integral LED use with a standard handle, part of the XB5 sub-range. It features a plastic body and bezel, with a diameter of 22 mm and dimensions of 29 mm in height and width, and 43 mm in depth. This part offers a red light color and operates in a 2-position stay-put mode with angular positions at 0 and 90 degrees. It boasts a mechanical durability of 1,000,000 operations at no load and is equipped with a degree of protection rated at IP69K, NEMA 4X, and NEMA 13, ensuring its capability to withstand demanding environmental conditions.

E3X-DA11-S

Omron

OBSOLETE

FP0-TC4

Panasonic

FP0 Thermocouple Unit, 4 IN, J, K, T and

4 in stock

ZBVB5

Schneider Electric

Schneider Electric ZBVB5 is a light unit designed as a light block with an integral LED. It features a degree of protection rated at IP20 and operates on a network frequency of 50/60 Hz. This unit is compatible with a supply voltage of 24 V, available in both AC and DC formats. The light emitted by the ZBVB5 is orange, and it is equipped with screw-clamp type terminals for secure connections.

QS18VP6FF100Q8

Banner

WORLD-BEAM QS18 Series: Fixed-Field; Range: 100 mm cutoff; Output: Complementary Solid-State PNP; M12 Integral QD

8 in stock

PAXT0010

Red Lion

ZB5AK1243

Schneider Electric

ZBVB5

Schneider Electric

PAXT0010

Red Lion

ZB5AK1243

Schneider Electric